FUJITSU CORPORATION
===================

   M2488

   Device Type             External Tape Drive                    
   Interface               SCSI-2 Fast/Wide                       
   Format                  Unidentified                           
   Sustained Transfer Rate 20 MBPS                                
   Size                    5.25 in. full height                   
   View                    Top                                    

<gopher://bitreich.org/I/th99/p/E-H/70203-1.png>
   

<gopher://bitreich.org/I/th99/p/E-H/70203-2.png>
   

   +------------------------------------------------------------+
   |                     DIAGNOSTIC LED(S)                      |
   |------------------------------------------------------------|
   |  LED  |    Color     | Status |         Condition          |
   |-------+--------------+--------+----------------------------|
   | LED1  | Unidentified |   On   |  Prompts user to load the  |
   |       |              |        |         cartridge.         |
   |-------+--------------+--------+----------------------------|
   | LED1  | Unidentified |  Off   |    Cartridge is loaded     |
   |-------+--------------+--------+----------------------------|
   | LED2  | Unidentified |   On   |  Drive is selected on the  |
   |       |              |        |          SCSI bus          |
   |-------+--------------+--------+----------------------------|
   | LED2  | Unidentified |  Off   |  Drive is not selected on  |
   |       |              |        |        the SCSI bus        |
   |-------+--------------+--------+----------------------------|
   | LED3  | Unidentified |   On   |        The drive is        |
   |       |              |        | reading/writing compressed |
   |       |              |        |            data            |
   |-------+--------------+--------+----------------------------|
   | LED3  | Unidentified |  Off   |        The drive is        |
   |       |              |        |      reading/writing       |
   |       |              |        |     uncompressed data      |
   |------------------------------------------------------------|
   | Note: LED's 4 through 10 each represent the different tape |
   | positions between BOT and EOT. When the tape is moving in  |
   | the forward position, the LED's light up sequentially      |
   | starting from the BOT position. When the tape is moving in |
   | reverse, the LED's light up sequentially in the reverse    |
   | order.                                                     |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |               MISCELLANEOUS TECHNICAL NOTES                |
   |------------------------------------------------------------|
   | The IPM is an adapter card that is available in four       |
   | different configurations: 50-pin SCSI connector (2x),      |
   | 68-pin SCSI connector (2x), 50-pin SCSI connector &        |
   | Terminating Resistor, 68-pin SCSI connector & Terminating  |
   | Resistor. The Termination Power is supplied by the SCSI    |
   | interface through pin 36. This setting is only valid with  |
   | this specific IPM installed.                               |
   +------------------------------------------------------------+