TECMAR
======

   WANGTEK 5525ES (33959-XXX)

   Device Type        Internal Tape Drive                         
   Interface          SCSI-1, SCSI-2                              
   Format             QIC-120, QIC-150, or QIC525 (write)         
                                                                  
                      QIC-24, QIC-120, QIC-150, or QIC-525 (read) 
   Sustained Transfer 200 KBPS                                    
   Rate               
   Size               5.25 in. half height                        
   View               Bottom                                      

<gopher://bitreich.org/I/th99/p/S-T/70097-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |           Function            |           Label            |
   |-------------------------------+----------------------------|
   | Chassis ground connector      |             W1             |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |               Setting               | Label |   Position   |
   |-------------------------------------+-------+--------------|
   |>> | Factory configured - do not     |  E2   |     Open     |
   |   | alter (Built in test mode(s))   |       |              |
   |---+---------------------------------+-------+--------------|
   |>> | Factory configured - do not     |  E3   | Unidentified |
   |   | alter                           |       |              |
   |---+---------------------------------+-------+--------------|
   |>> | Factory configured - do not     |  E4   |     Open     |
   |   | alter (Built in test mode(s))   |       |              |
   |---+---------------------------------+-------+--------------|
   |>> | Factory configured - do not     |  E5   |    Closed    |
   |   | alter (48 MHz main oscillator   |       |              |
   |   | enabled)                        |       |              |
   |---+---------------------------------+-------+--------------|
   |>> | 1024 byte block mode enabled    |  JP2  |     Open     |
   |---+---------------------------------+-------+--------------|
   |   | 512 byte block mode enabled     |  JP2  |    Closed    |
   |---+---------------------------------+-------+--------------|
   |>> | Factory configured - do not     |  JP3  |     Open     |
   |   | alter (Built in test mode(s))   |       |              |
   |---+---------------------------------+-------+--------------|
   |>> | Factory configured - do not     |  JP6  |     Open     |
   |   | alter (Built in test mode(s))   |       |              |
   |---+---------------------------------+-------+--------------|
   |>> | Factory configured - do not     |  JP7  | Unidentified |
   |   | alter                           |       |              |
   |---+---------------------------------+-------+--------------|
   |>> | Factory configured - do not     |  JP8  | Unidentified |
   |   | alter                           |       |              |
   |---+---------------------------------+-------+--------------|
   |>> | Factory configured - do not     |  JP9  |   All pins   |
   |   | alter                           |       |     open     |
   |---+---------------------------------+-------+--------------|
   |>> | Factory configured - do not     | JP12  |     Open     |
   |   | alter (Built in test mode(s))   |       |              |
   |---+---------------------------------+-------+--------------|
   |>> | Factory configured - do not     | JP32  |     Open     |
   |   | alter (Diagnostic test          |       |              |
   |   | connector)                      |       |              |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                      DRIVE SELECT ID                       |
   |------------------------------------------------------------|
   |     Drive ID      |    JP1/A    |    JP1/B    |   JP1/C    |
   |-------------------+-------------+-------------+------------|
   |>>       |    0    |    Open     |    Open     |    Open    |
   |---------+---------+-------------+-------------+------------|
   |         |    1    |   Closed    |    Open     |    Open    |
   |---------+---------+-------------+-------------+------------|
   |         |    2    |    Open     |   Closed    |    Open    |
   |---------+---------+-------------+-------------+------------|
   |         |    3    |   Closed    |   Closed    |    Open    |
   |---------+---------+-------------+-------------+------------|
   |         |    4    |    Open     |    Open     |   Closed   |
   |---------+---------+-------------+-------------+------------|
   |         |    5    |   Closed    |    Open     |   Closed   |
   |---------+---------+-------------+-------------+------------|
   |         |    6    |    Open     |   Closed    |   Closed   |
   |---------+---------+-------------+-------------+------------|
   |         |    7    |   Closed    |   Closed    |   Closed   |
   |------------------------------------------------------------|
   | Note: Jumper JP1/D is factory configured and should not be |
   | altered. The default position for JP1/D is Open.           |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                TERMINATION POWER SELECTION                 |
   |------------------------------------------------------------|
   |                     Setting                     |    E1    |
   |-------------------------------------------------+----------|
   |>>    | TERMPWR supplied by drive                |  Closed  |
   |------+------------------------------------------+----------|
   |      | TERMPWR supplied by SCSI interface to    |   Open   |
   |      | drive                                    |          |
   |------------------------------------------------------------|
   | Note: The fuse at F1 must be installed when TERMPWR is     |
   | supplied by the drive.                                     |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |               MISCELLANEOUS TECHNICAL NOTES                |
   |------------------------------------------------------------|
   | Termination is enabled or disabled via the three removable |
   | terminating resistors (see diagram).                       |
   +------------------------------------------------------------+