TECMAR
======

   WANGTEK 5150ES (33678-XXX VER.2)

   Device Type             Internal Tape Drive                    
   Interface               SCSI                                   
   Format                  QIC-120, QIC-150 (write)               
                                                                  
                           QIC-24, QIC-120, QIC-150 (read)        
   Sustained Transfer Rate 1800KBPS                               
   Size                    5.25 in. half height                   
   View                    Bottom                                 

<gopher://bitreich.org/I/th99/p/S-T/70100-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |           Function            |           Label            |
   |-------------------------------+----------------------------|
   | Ground connector              |            CN1             |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |                 Setting                 | Label | Position |
   |-----------------------------------------+-------+----------|
   |>> | Ground connector enabled            |  E2   |  Closed  |
   |---+-------------------------------------+-------+----------|
   |   | Ground connector disabled           |  E2   |   Open   |
   |---+-------------------------------------+-------+----------|
   |>> | Factory configured - do not alter   |  E5   |  Closed  |
   |---+-------------------------------------+-------+----------|
   |>> | Factory configured - do not alter   | E20/0 |   Open   |
   |---+-------------------------------------+-------+----------|
   |>> | Factory configured - do not alter   | E20/1 |   Open   |
   |---+-------------------------------------+-------+----------|
   |>> | Factory configured - do not alter   | E20/2 |   Open   |
   |---+-------------------------------------+-------+----------|
   |>> | Factory configured - do not alter   |  J32  |   Open   |
   |   | (Diagnostic test connector)         |       |          |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                      DRIVE SELECT ID                       |
   |------------------------------------------------------------|
   |    Drive ID     |    J10/A     |    J10/B    |    J10/C    |
   |-----------------+--------------+-------------+-------------|
   |        0        |     Open     |    Open     |    Open     |
   |-----------------+--------------+-------------+-------------|
   |        1        |    Closed    |    Open     |    Open     |
   |-----------------+--------------+-------------+-------------|
   |        2        |     Open     |   Closed    |    Open     |
   |-----------------+--------------+-------------+-------------|
   |        3        |    Closed    |   Closed    |    Open     |
   |-----------------+--------------+-------------+-------------|
   |        4        |     Open     |    Open     |   Closed    |
   |-----------------+--------------+-------------+-------------|
   |        5        |    Closed    |    Open     |   Closed    |
   |-----------------+--------------+-------------+-------------|
   |        6        |     Open     |   Closed    |   Closed    |
   |-----------------+--------------+-------------+-------------|
   |        7        |    Closed    |   Closed    |   Closed    |
   |------------------------------------------------------------|
   | Note: The function of jumper J10/D is unidentified. It is  |
   | factory configured and should not be altered.              |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                TERMINATION POWER SELECTION                 |
   |------------------------------------------------------------|
   |                     Setting                     |    E1    |
   |-------------------------------------------------+----------|
   |>> | TERMPWR supplied by drive                   |  Closed  |
   |---+---------------------------------------------+----------|
   |   | TERMPWR supplied by SCSI interface to drive |   Open   |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |              MANUFACTURERS RECOMMENDED MEDIA               |
   |------------------------------------------------------------|
   |            Tape            |           Capacity            |
   |----------------------------+-------------------------------|
   |          DC 600A           |   125 MB (in QIC-120 mode)    |
   |----------------------------+-------------------------------|
   |          DC 6150           |   150 MB (in QIC-150 mode)    |
   |----------------------------+-------------------------------|
   |          DC 6250           |   250 MB (in QIC-150 mode)    |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                     DIAGNOSTIC LED(S)                      |
   |------------------------------------------------------------|
   | Note: Function and location of LED(s) is/are unidentified. |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |               MISCELLANEOUS TECHNICAL NOTES                |
   |------------------------------------------------------------|
   | Termination is enabled or disabled via the three           |
   | terminating resistors (see diagram).                       |
   +------------------------------------------------------------+