SEAGATE TECHNOLOGY, INC. ======================== SIDEWINDER 50 EXTERNAL Device Type External Tape Drive Interface SCSI-2 Fast/Wide Format AIT-1 Sustained Transfer 3MBPS (Native), 6 to 9MBPS (Compressed) Rate Size 5.25 in. half height View Bottom +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |-------------------------------------+-------+--------------| |>> | Parity check enabled | JP1/1 | Open | |---+---------------------------------+-------+--------------| | | Parity check disabled | JP1/1 | Closed | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | JP1/2 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | SW2/1 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | SW2/2 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | SW2/3 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | SW2/4 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Termination enabled | SW2/6 | On | |---+---------------------------------+-------+--------------| | | Termination disabled | SW2/6 | Off | |---+---------------------------------+-------+--------------| |>> | Data compression enabled | SW2/7 | On | |---+---------------------------------+-------+--------------| | | Data compression disabled | SW2/7 | Off | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | SW2/8 | On | | | alter | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | DRIVE SELECT ID | |------------------------------------------------------------| | Note: To configure the tape drive's SCSI ID, you must set | | SW1 to the desired ID number. The SCSI ID number is | | viewable through the viewing window on SW1. The address is | | shown in hexadecimal form. | +------------------------------------------------------------+ +------------------------------------------------------------+ | TERMINATION POWER SELECTION | |------------------------------------------------------------| | Setting | SW2/5 | |-------------------------------------------------+----------| |>> | TERMPWR supplied by drive | On | |---+---------------------------------------------+----------| | | TERMPWR supplied by SCSI interface to drive | Off | +------------------------------------------------------------+ +------------------------------------------------------------+ | MANUFACTURERS RECOMMENDED MEDIA | |------------------------------------------------------------| | Tape | Capacity Without | Capacity With | | | Compression | Compression | |-------+--------------------------+-------------------------| | AIT-1 | 25GB | 50GB to 75GB | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| |LED1| LED2 | LED3 | LED4 | Condition | |----+------------+------------+------------+----------------| | On | Variable | Variable | Variable | Power on | |----+------------+------------+------------+----------------| |Off | Off | Off | Off | Power off | |----+------------+------------+------------+----------------| | On | Off | Off | Off |No drive or SCSI| | | | | | activity | |----+------------+------------+------------+----------------| | On | On | Off | Off | SCSI activity | | | | | | only | |----+------------+------------+------------+----------------| | On |Quick flash |Quick flash | Off | Write-enabled | | | | | | tape being | | | | | | loaded or | | | | | | unloaded | |----+------------+------------+------------+----------------| | On |Quick flash |Quick flash | On |Write-protected | | | | | | tape being | | | | | | loaded or | | | | | | unloaded | |----+------------+------------+------------+----------------| | On | Off | On |Quick flash | Cleaning tape | |----+------------+------------+------------+----------------| | On | Off | On | Off |Tape loaded - No| | | | | | drive or SCSI | | | | | | activity | |----+------------+------------+------------+----------------| | On | On | On | Off | Tape loaded - | | | | | |Activity on SCSI| | | | | | bus only | |----+------------+------------+------------+----------------| | On |Quick flash | On | Off | Tape loaded - | | | | | | SCSI and drive | | | | | | activity | |----+------------+------------+------------+----------------| | On | Variable | On | On |Write-protected | | | | | | tape loading | | | | | | into drive | |----+------------+------------+------------+----------------| | On | Variable | Blinking | Variable | Media error | | | | | |(loaded tape has| | | | | | excess errors) | |----+------------+------------+------------+----------------| | On |Unidentified|Unidentified| Blinking |Tape heads need | | | | | | cleaning | |----+------------+------------+------------+----------------| | On |Unidentified|Unidentified|Double flash| Self-test | | | | | | failure | |----+------------+------------+------------+----------------| | On | Slow flash |Unidentified|Unidentified|Hardware failure| | | | | | - Waiting for | | | | | | reset | |----+------------+------------+------------+----------------| | On |Unidentified| Slow flash |Unidentified|Hardware failure| | | | | | - Waiting for | | | | | | eject | |------------------------------------------------------------| |Note: The color of the LED's are unidentified. | +------------------------------------------------------------+