MITSUMI ELECTRONICS CORPORATION
===============================

   FX600 IDE CD-ROM DRIVE

   Device Type       CD-ROM                                       
   Interface         ATAPI                                        
   Spin Rate         6x                                           
   Formats Supported CD-DA, CD-I, CD plus, CD-ROM mode 1, CD-ROM  
                     XA mode 2, Forms 1 & 2, Photo CD, Video CD   

<gopher://bitreich.org/I/th99/r/M-O/60002-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |           Function            |           Label            |
   |-------------------------------+----------------------------|
   | Audio line out                |            CN1             |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                     ATAPI MASTER/SLAVE                     |
   |------------------------------------------------------------|
   |          Setting          |  JP1/1   |  JP1/2   |  JP1/3   |
   |---------------------------+----------+----------+----------|
   |     | Single drive only   |  Closed  |   Open   |   Open   |
   |-----+---------------------+----------+----------+----------|
   |     | Master in two drive |  Closed  |   Open   |   Open   |
   |     | system              |          |          |          |
   |-----+---------------------+----------+----------+----------|
   |>>   | Slave in two drive  |   Open   |  Closed  |   Open   |
   |     | system              |          |          |          |
   |-----+---------------------+----------+----------+----------|
   |     | Master/Slave        |   Open   |   Open   |  Closed  |
   |     | determined by Cable |          |          |          |
   |     | Select              |          |          |          |
   |------------------------------------------------------------|
   |          Note: 'Single drive' refers to the sole drive     |
   |      connected to an IDE interface (there may be up to two |
   |         on a given system). Master & Slave refer to two    |
   |                drives connected to an interface.           |
   +------------------------------------------------------------+