NEC TECHNOLOGIES, INC.
======================

   CDR-602

   Device Type       External CD-ROM                              
   Interface         SCSI-2                                       
   Spin Rate         6x                                           
   Formats Supported CD-XA Mode 2/Form 1 & 2, CD-DA, CD-I (FMV),  
   Read              CD-ROM (Mode 1 & Mode 2), Video CD, Red &    
                     Yellow Book, CD-Plus, Photo CD               
   View              Top                                          

<gopher://bitreich.org/I/th99/r/M-O/60306-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |        Function        | Label |     Function      | Label |
   |------------------------+-------+-------------------+-------|
   | Analog audio out       |  CN1  | Digital audio out |  CN3  |
   | connector (Left        |       | connector         |       |
   | channel)               |       |                   |       |
   |------------------------+-------+-------------------+-------|
   | Analog audio out       |  CN2  |                   |       |
   | connector (Right       |       |                   |       |
   | channel)               |       |                   |       |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |                Setting                 | Label  | Position |
   |----------------------------------------+--------+----------|
   |>> | Factory configured - do not alter  | SW2/1  |   Off    |
   |---+------------------------------------+--------+----------|
   |>> | Factory configured - do not alter  | SW2/2  |    On    |
   |---+------------------------------------+--------+----------|
   |>> | Factory configured - do not alter  | SW2/3  |   Off    |
   |---+------------------------------------+--------+----------|
   |>> | Factory configured - do not alter  | SW2/4  |   Off    |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                      DRIVE SELECT ID                       |
   |------------------------------------------------------------|
   | Note: SCSI ID is selected by activating SW1 until the      |
   | desired number is displayed in the viewing window.         |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                        ERROR CODES                         |
   |------------------------------------------------------------|
   |               Power On Initialization Errors               |
   |------------------------------------------------------------|
   | On power up, if the LCD screen displays ' E ' or ' EE ',   |
   | check the following                                        |
   |                                                            |
   |      1.If an empty caddy is inserted or partially inserted |
   |      in the drive, remove it and restart the drive.        |
   |                                                            |
   |      2.Turn the drive, disconnect the SCSI I/O cables and  |
   |      then turn the drive back on. If the problem still     |
   |      occurs the drive is either getting insufficent power  |
   |      or is broken. Check the power and if it's good, call  |
   |      Tech Support.                                         |
   |------------------------------------------------------------|
   |                      Diagnostic Mode                       |
   |------------------------------------------------------------|
   | To Start Diagnostic mode                                   |
   |                                                            |
   |      1.Put any data CD into the caddy and insert the caddy |
   |      into the drive.                                       |
   |                                                            |
   |      2.Restart the drive while holding the Play/Pause      |
   |      button on the front panel                             |
   |                                                            |
   | If there are any problems the error code will be displayed |
   | in the LCD window, or if no problems are found then 'ON'   |
   | will be displayed                                          |
   |------------------------------------------------------------|
   | Error Codes  |                   Action                    |
   |--------------+---------------------------------------------|
   | E0 or E1     | Make sure there is a CD in the caddy and    |
   |              | that the caddy is fully inserted into the   |
   |              | drive. If the problem persists, contact     |
   |              | Tech Support.                               |
   |--------------+---------------------------------------------|
   | E2, E3 or E4 | The drive is unable to read the CD. Insure  |
   |              | that the CD in the caddy is a data CD, not  |
   |              | a audio CD. Try another CD, to determine if |
   |              | the problem is limited to one disc, or the  |
   |              | drive. If the problem persists, contact     |
   |              | Tech Support.                               |
   |--------------+---------------------------------------------|
   | E5, E6 or E7 | Possible hardware failure, contact Tech     |
   |              | Support.                                    |
   +------------------------------------------------------------+