ACTIONTEC ELECTRONICS, INC ========================== COMNET 144 Card Type Fax, Modem (synchronous/asynchronous), Network Interface Card Chip Set Unidentified I/O Options Ethernet 10BaseT connector NIC Type Ethernet Network Transfer Rate 10Mbps Maximum Modem Rate 14.4Kbps Maximum Fax Rate 14.4Kbps Data Bus PCMCIA Type II Fax Class Class I & II Data Modulation Bell 103A/212A Protocol ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis Fax Modulation ITU-T V.17, V.21CH2, V.27ter, V.29 Protocol Error MNP5, V.42, V.42bis Correction/Compression Topology Star Wiring Type Unshielded twisted pair Boot ROM Not available V2291 +------------------------------------------------------------+ | SUPPORTED COMMAND SET | |------------------------------------------------------------| | Basic AT Commands | |------------------------------------------------------------| | AT, 'Comma', A/ | |------------------------------------------------------------| | A, B, C, E, F, H, L, M, N, O, Q, S, V, W, X, Z | |------------------------------------------------------------| | &C, &D, &F, &T, &V, &W, &X, &Z | |------------------------------------------------------------| | Extended AT Commands | |------------------------------------------------------------| | \A, \B, \G, \J, \K, \L, | |------------------------------------------------------------| | %C, %E, %L, %Q, %TT | |------------------------------------------------------------| | S Registers | |------------------------------------------------------------| | S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, | | S14, S16, S18, S21, S22, S23, S24, S25 | |------------------------------------------------------------| | S26, S27, S28, S29, S30, S31, S32, S33, S36, S37, S39, | | S40, S41, S46, S48, S82, S86, S91, S92 | |------------------------------------------------------------| | S95, S99 | |------------------------------------------------------------| | Special Commands | |------------------------------------------------------------| | *H, -K, -Q, )M, | |------------------------------------------------------------| | Note: See MHI Help file for full command documentation. | +------------------------------------------------------------+ Proprietary AT Command Set