ADC KENTROX =========== DATASMART T1 SMDSU MODEL 78963 Card Type T1 CSU/DSU Chipset Unidentified T1 Transfer Rate 1.544Mbps T1 Protocol B8ZS, ZBTSI Frame Type ESF Data Bus Serial +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |---------------------+-------+----------------------+-------| | T1 line in | CN1 | V.35 serial data | CN5 | | | | port via DB-25 | | | | | connector | | |---------------------+-------+----------------------+-------| | DCE serial control | CN2 | AC power in | CN6 | | port | | | | |---------------------+-------+----------------------+-------| | DTE serial control | CN3 | Alarm cutoff switch | S5 | | port | | | | |---------------------+-------+----------------------+-------| | EIA-530 serial data | CN4 | | | | port | | | | |------------------------------------------------------------| | Note:Standard V.35 serial port is provided on an | | included adapter cable. | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |-----------------------------------------+-------+----------| |>> | Control port parity disabled | S1/3 | On | |---+-------------------------------------+-------+----------| | | Control port parity enabled | S1/3 | Off | |---+-------------------------------------+-------+----------| |>> | Control port parity set to odd | S1/4 | On | |---+-------------------------------------+-------+----------| | | Control port parity set to even | S1/4 | Off | |---+-------------------------------------+-------+----------| |>> | Control port uses 8 data bits | S1/5 | On | |---+-------------------------------------+-------+----------| | | Control port uses 7 data bits | S1/5 | Off | |---+-------------------------------------+-------+----------| |>> | Control port uses 1 stop bit | S1/6 | On | |---+-------------------------------------+-------+----------| | | Control port uses 2 stop bits | S1/6 | Off | |---+-------------------------------------+-------+----------| |>> | V.35 data port enabled | S1/7 | On | |---+-------------------------------------+-------+----------| | | EIA-530 data port enabled | S1/7 | Off | |---+-------------------------------------+-------+----------| |>> | Alarm reporting output to DCE | S1/8 | On | | | control port | | | |---+-------------------------------------+-------+----------| | | Alarm reporting output to DTE | S1/8 | Off | | | control port | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONTROL PORT SPEED SELECTION | |------------------------------------------------------------| | Setting | S1/1 | S1/2 | |-------------------------+-----------------+----------------| |>> | 9600bps | On | On | |----+--------------------+-----------------+----------------| | | 4800bps | On | Off | |----+--------------------+-----------------+----------------| | | 2400bps | Off | On | |----+--------------------+-----------------+----------------| | | 1200bps | Off | Off | +------------------------------------------------------------+ +------------------------------------------------------------+ | LINE BUILD OUT SELECTION | |------------------------------------------------------------| | Setting | S2 | S3 | |------------------------+-----------------+-----------------| |>> | 0 dB | Off | Off | |---+--------------------+-----------------+-----------------| | | -7.5 dB | On | Off | |---+--------------------+-----------------+-----------------| | | -15 dB | Off | On | |---+--------------------+-----------------+-----------------| | | -22.5 dB | On | On | +------------------------------------------------------------+ +------------------------------------------------------------+ | THUMBWEEL FUNCTION SELECTION | |------------------------------------------------------------| | Function | S4 | S6 | S5 | |-------------------------------+--------+----------+--------| | Reset loopback tests | Pushed | Position | Not | | | | 0 | pushed | |-------------------------------+--------+----------+--------| | Reset to factory defaults and | Pushed | Position | Pushed | | switch settings | for 2 | 3 | for 2 | | | sec. | | sec. | |-------------------------------+--------+----------+--------| | Begin near-end line loopback | Pushed | Position | Not | | test | | 4 | pushed | |-------------------------------+--------+----------+--------| | Begin near-end payload | Pushed | Position | Not | | loopback test | | 5 | pushed | |-------------------------------+--------+----------+--------| | Begin near-end local loopback | Pushed | Position | Not | | test | | 6 | pushed | |-------------------------------+--------+----------+--------| | Begin data near-end terminal | Pushed | Position | Not | | loopback test | | 7 | pushed | |-------------------------------+--------+----------+--------| | Reset IDSU address to | Pushed | Position | Pushed | | 00:00:000 | for 2 | 7 | for 2 | | | sec. | | sec. | |-------------------------------+--------+----------+--------| | Send QRST test code | Pushed | Position | Not | | | | 8 | pushed | |-------------------------------+--------+----------+--------| | Send 3 in 24 test code | Pushed | Position | Not | | | | 9 | pushed | |------------------------------------------------------------| | Note:S4 and S6 must always be held for at least | | one-half of one second for the above functions to | | take effect. | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |------+--------+----------+---------------------------------| | RCV | Green | On | DSU is receiving data from | | | | | network | |------+--------+----------+---------------------------------| | RCV | Green | Off | DSU is not receiving data from | | | | | network | |------+--------+----------+---------------------------------| | XMT | Green | On | DSU is transmitting data to | | | | | network | |------+--------+----------+---------------------------------| | XMT | Green | Off | DSU is not transmitting data to | | | | | network | |------+--------+----------+---------------------------------| | FEI | Red | On | Remote is out of PLCP lock | |------+--------+----------+---------------------------------| | FEI | Red | Blinking | Remote block error detected | |------+--------+----------+---------------------------------| | FEI | Red | Off | Remote PLCP normal | |------+--------+----------+---------------------------------| | NEI | Red | On | Local DSU is out of PLCP lock | |------+--------+----------+---------------------------------| | NEI | Red | Blinking | Local DSU detected a block | | | | | error | |------+--------+----------+---------------------------------| | NEI | Red | Off | Local DSU PLCP normal | |------+--------+----------+---------------------------------| | DATA | Green | On | Valid data signal detected | |------+--------+----------+---------------------------------| | DATA | Green | Blinking | Network Set, Reset, or Test | | | | | code detected | |------+--------+----------+---------------------------------| | DATA | Green | Off | No valid signal detected | |------+--------+----------+---------------------------------| | CV | Red | On | Code Violation, Frame Sync, or | | | | | CRC error detected | |------+--------+----------+---------------------------------| | CV | Red | Off | Error not detected | |------+--------+----------+---------------------------------| | LOS | Red | On | Loss Of Signal condition | | | | | detected | |------+--------+----------+---------------------------------| | LOS | Red | Off | Loss Of Signal condition not | | | | | detected | |------+--------+----------+---------------------------------| | OOF | Red | On | Signal is out of frame | | | | | synchronization | |------+--------+----------+---------------------------------| | OOF | Red | Off | Signal is not out of frame | | | | | synchronization | |------+--------+----------+---------------------------------| | AIS | Red | On | Alarm Indication Signal | | | | | condition detected | |------+--------+----------+---------------------------------| | AIS | Red | Off | Alarm Indication Signal | | | | | condition not detected | |------+--------+----------+---------------------------------| | YEL | Yellow | On | Remote Yellow Alarm condition | | | | | detected | |------+--------+----------+---------------------------------| | YEL | Yellow | Blinking | Local Yellow Alarm condition | | | | | detected | |------+--------+----------+---------------------------------| | YEL | Yellow | Off | Yellow Alarm condition not | | | | | detected | |------+--------+----------+---------------------------------| | PWR | Green | On | Power is on | |------+--------+----------+---------------------------------| | PWR | Red | On | Self-test failed | |------+--------+----------+---------------------------------| | PWR | Green | Blinking | Downloading software | |------+--------+----------+---------------------------------| | PWR | N/A | Off | Power is off | |------+--------+----------+---------------------------------| | LOOP | Yellow | On | Local loopback test in progress | |------+--------+----------+---------------------------------| | LOOP | Yellow | Blinking | Remote loopback test in | | | | | progress | |------+--------+----------+---------------------------------| | LOOP | Yellow | Off | Loopback test not in progress | |------+--------+----------+---------------------------------| | SEND | Yellow | On | Test code being sent | |------+--------+----------+---------------------------------| | SEND | Yellow | Blinking | Remote loopback test may be in | | | | | progress but cannot be verified | |------+--------+----------+---------------------------------| | SEND | Yellow | Off | Test code not being sent | |------+--------+----------+---------------------------------| | ALM | Red | On | Alarm condition detected and | | | | | awaiting user intervention | |------+--------+----------+---------------------------------| | ALM | Green | On | Alarm condition detected; user | | | | | intervention in progress | |------+--------+----------+---------------------------------| | ALM | N/A | Off | Alarm condition not detected | +------------------------------------------------------------+