BANKSIA TECHNOLOGY PTY. LTD. ============================ MAC MODEM 144 Card Type Fax, Modem (asynchronous) Chip Set Unidentified Maximum Data Rate 14.4Kbps Maximum Fax Rate 14.4Kbps Data Bus External Fax Class Class I & II Data Modulation ITU-T V.21, V.22, V.22bis, V.32, Protocol V.32bis Fax Modulation ITU-T V.17, V.27ter, V.29 Protocol Error MNP5, MNP10, V.42, V.42bis Correction/Compression +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |------------------------------------------------------------| | Line out | CN1 | DC power | CN4 | |---------------------------+----------+--------------+------| | Line in | CN2 | Power switch | SW1 | |---------------------------+----------+--------------+------| | RS-232/422 | CN3 | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |------+-------+--------+------------------------------------| | PWR | Red | On | Power is on | |------+-------+--------+------------------------------------| | PWR | Red | Off | Power is off | |------+-------+--------+------------------------------------| | OH | Red | On | Modem is off-hook | |------+-------+--------+------------------------------------| | OH | Red | Off | Modem is on-hook | |------+-------+--------+------------------------------------| | DTR | Red | On | DTR signal is high | |------+-------+--------+------------------------------------| | DTR | Red | Off | DTR signal is low | |------+-------+--------+------------------------------------| | DCD | Red | On | Carrier signal detected | |------+-------+--------+------------------------------------| | DCD | Red | Off | Carrier signal not detected | |------+-------+--------+------------------------------------| | CTS | Red | On | Modem ready to receive data | |------+-------+--------+------------------------------------| | CTS | Red | Off | Modem not ready to receive data | |------+-------+--------+------------------------------------| | RTS | Red | On | Computer ready to receive data | |------+-------+--------+------------------------------------| | RTS | Red | Off | Computer not ready to receive data | |------+-------+--------+------------------------------------| | RXD | Red | On | Modem is receiving data | |------+-------+--------+------------------------------------| | RXD | Red | Off | Modem is not receiving data | |------+-------+--------+------------------------------------| | TXD | Red | On | Modem is transmitting data | |------+-------+--------+------------------------------------| | TXD | Red | Off | Modem is not transmitting data | |------+-------+--------+------------------------------------| | AA | Red | On | Auto-answer enabled | |------+-------+--------+------------------------------------| | AA | Red | Off | Auto-answer disabled | |------+-------+--------+------------------------------------| | TST | Red | On | Modem in test mode | |------+-------+--------+------------------------------------| | TST | Red | Off | Modem not in test mode | +------------------------------------------------------------+ +------------------------------------------------------------+ | SUPPORTED COMMAND SET | |------------------------------------------------------------| | Basic AT Commands | |------------------------------------------------------------| | AT, '+++', 'Comma', A/ | |------------------------------------------------------------| | A, B, E, H, I, L, M, N, O, P, Q, S, T, V, W, X, Y, Z | |------------------------------------------------------------| | &C, &D, &F, &G, &K, &L, &P, &S, &T, &V, &W, &Y, &Z | |------------------------------------------------------------| | Extended AT Commands | |------------------------------------------------------------| | \A, \B, \G, \L, %C, %L, %Q | |------------------------------------------------------------| | S Registers | |------------------------------------------------------------| | S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, | | S14, S16, S18, S21, S22, S24, S25, S26 | |------------------------------------------------------------| | S29, S30, S31, S32, S33, S36, S37, S38, S39, S46, S48, | | S82, S86, S91, S92, S95 | |------------------------------------------------------------| | Special Commands | |------------------------------------------------------------| | *H, -K, -Q, )M, @M, :E, +MS | |------------------------------------------------------------| | Note: See MHI Help file for full command documentation. | +------------------------------------------------------------+ Proprietary AT Command Set +------------------------------------------------------------+ | MODULATION SELECTION | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] Fn [cmds] | |--------------+---------------------------------------------| | Description: | Controls line modulation unless automode is | | | selected | |------------------------------------------------------------| | Command | Function | |----------------+-------------------------------------------| | F0 | Automode enabled | |----------------+-------------------------------------------| | F1 | Force V.21 or Bell103 (according to ATB | | | command) at 300bps | |----------------+-------------------------------------------| | F2 | 'OK' returned | |----------------+-------------------------------------------| | F3 | Force V.23 75TX/1200RX originate or | | | 1200TX/75RX answer FSK | |----------------+-------------------------------------------| | F4 | Force V.22 or Bell212A (according to ATB | | | command) at 1200bps | |----------------+-------------------------------------------| | F5 | Force V.22bis or Bell2400 (according to | | | ATB command) | |----------------+-------------------------------------------| | F6 | Force V.32 at 4800bps | |----------------+-------------------------------------------| | F7 | Force V.32 at 7200bps | |----------------+-------------------------------------------| | F8 | Force V.32 at 9600bps | |----------------+-------------------------------------------| | F9 | Force V.32bis at 12000bps | |----------------+-------------------------------------------| | F10 | Force V.32bis at 14400bps | +------------------------------------------------------------+ For proprietary command summary, See BANKSIA TECHNOLOGY PTY., LTD., MAC MODEM 288.