BOCA RESEARCH, INC. =================== SOUND EXPRESSION (SE34SRS), SOUND EXPRESSION (SE34SVD) Card Type Sound/Modem card Chip Set Unidentified Maximum Onboard Memory Unidentified I/O Options Game/MIDI port, CD-ROM interface - IDE, Audio in - CD-ROM (3), speaker, line out, line in, microphone in, telephone jack Maximum Modem Rate 28.8Kbps Maximum Fax Rate 14.4Kbps Data Modulation Bell 103A/212A Protocol ITU-T V.22, V.22bis, V.32, V.32bis, V.34 Rockwell V.FC Fax Modulation ITU-T V.17, V.21CH2, V.27ter, V.29 Protocol Error MNP5, V.42, V.42bis Correction/Compression Fax Class Class I & II Data Bus 16-bit ISA +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | Function | Location | |------------------------------------------------------------| | Game/MIDI port | CN1 | Wavetable | CN6 | |-------------------+---------+-----------------+------------| | Speaker | CN2 | CD-ROM | CN7 | | | | interface - IDE | | |-------------------+---------+-----------------+------------| | Line out | CN3 | Audio in - | J9 | | | | CD-ROM | | | | | (Mitsumi) | | |-------------------+---------+-----------------+------------| | Line in | CN4 | Audio in - | J10 | | | | CD-ROM | | | | | (Panasonic) | | |-------------------+---------+-----------------+------------| | RJ-11 telephone | CN5 | Audio in - | J11 | | jack | | CD-ROM | | | | | (Sony/IDE) | | +------------------------------------------------------------+ +------------------------------------------------------------+ | SUPPORTED COMMAND SET | |------------------------------------------------------------| | Basic AT Commands | |------------------------------------------------------------| | AT, '+++', 'comma', A/ | |------------------------------------------------------------| | A, B, C, E, H, L, M, O, Q, R, S, T, U, V, W, X, Y, Z | |------------------------------------------------------------| | &C, &F, &P, &Q, &R, &S, &T, &V, &W, &Y, &Z | |------------------------------------------------------------| | Extended AT Commands | |------------------------------------------------------------| | \A, \B | |------------------------------------------------------------| | %C, %E, %L, %Q | |------------------------------------------------------------| | S Registers | |------------------------------------------------------------| | S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, | | S14, S16, S18, S21, S22, S23, S24, S25, | |------------------------------------------------------------| | S26, S27, S28, S29, S30,S31, S32, S33, S36, S38, S39, S40, | | S41, S46, S48, S82, S86, S91, S92, | |------------------------------------------------------------| | S95 | |------------------------------------------------------------| | Special Commands | |------------------------------------------------------------| | +MS?, +MS | |------------------------------------------------------------| | Note: See MHI Help File for full command documentation. | +------------------------------------------------------------+ Proprietary AT Command Set +------------------------------------------------------------+ | DIAL | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] D<#> [cmds] | |--------------+---------------------------------------------| | Description: | Dials telephone number according to any | | | modifiers included in the string | |--------------+---------------------------------------------| | Note: | Any combination of modifiers can be used to | | | produce the desired dial functions in | | | sequence. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | D | Dial | |--------------+---------------------------------------------| | DL | Re-dial last number | |--------------+---------------------------------------------| | DP | Pulse dialing enabled | |--------------+---------------------------------------------| | DS=n | Dial stored telephone number n | |--------------+---------------------------------------------| | DT | Tone dialing enabled/Pulse dialing disabled | |--------------+---------------------------------------------| | DW | Dialing resumed following dial tone | | | detection | |--------------+---------------------------------------------| | D, | Dialing paused for amount of time specified | | | in S8 register | |--------------+---------------------------------------------| | D! | Flash function initiated. Modem commanded | | | to go off-hook for specified time before | | | returning on-hook. | |--------------+---------------------------------------------| | D@ | Wait for Quite Answer function enabled. | | | Modem waits until a "quiet answer," a | | | ring-back signal followed by silence up to | | | the time specified in S7, is received prior | | | to executing the rest of the dial string. | |--------------+---------------------------------------------| | D; | Modem returned to idle state after dialing. | | | The semicolon can only be placed at the end | | | of the dial command. | |--------------+---------------------------------------------| | D^ | Disable dialing code. | +------------------------------------------------------------+ +------------------------------------------------------------+ | REPORT INFORMATION | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] In [cmds] | |--------------+---------------------------------------------| | Description: | Displays information requested | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | I0 | Reports product ID | |--------------+---------------------------------------------| | I1 | Reports checksum | |--------------+---------------------------------------------| | I2 | Tests and reports ROM checksum | |--------------+---------------------------------------------| | I3 | Reports firmware revision | |--------------+---------------------------------------------| | I4 | Reports OEM-defined identifier string. | |--------------+---------------------------------------------| | I5 | Reports country code | |--------------+---------------------------------------------| | I6 | Reports modem data pump model | +------------------------------------------------------------+ +------------------------------------------------------------+ | AUTO-MODE DETECTION | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] Nn [cmds] | |--------------+---------------------------------------------| | Description: | Selects various options for the automatic | | | detection and negotiation of protocols | | | during the handshake process if the modem | | | is communicating with a remote modem of | | | dissimilar speed. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | N0 | Auto-mode detection disabled | |--------------+---------------------------------------------| | i N1 | Permits handshaking at any speed supported | | | by both modems. | +------------------------------------------------------------+ +------------------------------------------------------------+ | DATA TERMINAL READY (DTR) | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] &Dn [cmds] | |--------------+---------------------------------------------| | Description: | Selects modem response to DTR | |------------------------------------------------------------| | Note: The action each variant of &D causes depends on | | the setting of &Q | |------------------------------------------------------------| | &Q Setting | &D0 | &D1 | &D2 | &D3 | |----------------+----------+----------+----------+----------| | i &Q0, &Q5, | Command | Command | Command | Command | | &Q6 | 0 | 3 | 2 | 4 | |----------------+----------+----------+----------+----------| | &Q1, &Q4 | Command | Command | Command | Command | | | 1 | 3 | 2 | 4 | |----------------+----------+----------+----------+----------| | &Q2, &Q3 | Command | Command | Command | Command | | | 2 | 2 | 2 | 2 | |------------------------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | Command 0 | Modem does not respond to DTR | |--------------+---------------------------------------------| | Command 1 | Modem disconnects (hangs up) after DTR goes | | | off; Auto-Answer not affected | |--------------+---------------------------------------------| | i Command 2 | Modem goes to command mode and disconnects | | | (hangs up) after DTR goes off; Auto-Answer | | | is disabled. | |--------------+---------------------------------------------| | Command | Asynchronous escape sequence | | | | | 3 | | |--------------+---------------------------------------------| | Command 4 | Modem does a soft reset | +------------------------------------------------------------+ +------------------------------------------------------------+ | FLOW CONTROL | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] &Kn [cmds] | |--------------+---------------------------------------------| | Description: | Enables flow control options | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | &K0 | Flow control disabled | |--------------+---------------------------------------------| | i &K3 | RTS/CTS flow control enabled | |--------------+---------------------------------------------| | &K4 | XON/XOFF flow control enabled | |--------------+---------------------------------------------| | &K5 | Enable transport XON/XOFF | |--------------+---------------------------------------------| | &K6 | Enable both RTS/CTS and XON/XOFF | +------------------------------------------------------------+ +------------------------------------------------------------+ | BREAK TYPE | |------------------------------------------------------------| | Type: | Configuration | |---------------------+--------------------------------------| | Format: | AT [cmds] \Kn [cmds] | |---------------------+--------------------------------------| | Description: | Configures action of break signal | |------------------------------------------------------------| | Command | Break from | Break from DTE | Break received | | | DTE | during Direct | from remote | | | | Mode | modem | |-----------+--------------+----------------+----------------| | \K0 | Online | Break sent to | Buffers | | | command mode | remote modem | cleared, break | | | enabled, | and command | sent to DTE | | | send no | entered | | | | break to | | | | | remote modem | | | |-----------+--------------+----------------+----------------| | \K1 | Break sent | Break sent to | Buffers | | | to remote | remote modem | cleared, break | | | modem and | and command | sent to DTE | | | buffered | entered | | | | cleared | | | |-----------+--------------+----------------+----------------| | \K2 | Online | Send break | Break sent | | | command mode | with | immediately to | | | enabled, | transmitted | DTE | | | send no | data | | | | break to | | | | | remote modem | | | |-----------+--------------+----------------+----------------| | \K3 | Send break | Break sent to | Break sent | | | to remote | remote modem | immediately to | | | modem | and command | DTE | | | immediately | entered | | |-----------+--------------+----------------+----------------| | \K4 | Online | Send break | Break sent | | | command mode | with | with received | | | enabled, | transmitted | data to the | | | send no | data | DTE | | | break to | | | | | remote modem | | | |-----------+--------------+----------------+----------------| | i \K5 | Send break | Send break | Break sent | | | with | with | with received | | | transmitted | transmitted | data to the | | | data | data | DTE | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONNECT MODE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Nn [cmds] | |--------------+---------------------------------------------| | Description: | Controls the type of connection the modem | | | will operate in | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \N0 | Normal mode enabled | |--------------+---------------------------------------------| | \N1 | Direct mode enabled | |--------------+---------------------------------------------| | \N2 | MNP reliable mode enabled | |--------------+---------------------------------------------| | \N3 | Auto-reliable mode or MNP auto-reliable | | | mode enabled | |--------------+---------------------------------------------| | \N4 | V.42 reliable mode enabled | |--------------+---------------------------------------------| | \N5 | V.42 auto-reliable mode or MNP | | | auto-reliable mode enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | DCE LINE SPEED | |------------------------------------------------------------| | Type: | Register | |--------------+---------------------------------------------| | Format | AT [cmds] S37=n [cmds] | |--------------+---------------------------------------------| | Description: | Sets the maximum allowable data exchange | | | rate attempted during handshake process. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | i S37=0 | Speed of last connection | |--------------+---------------------------------------------| | S37=1-3 | 300bps | |--------------+---------------------------------------------| | S37=4 | Reserved | |--------------+---------------------------------------------| | S37=5 | 1200bps | |--------------+---------------------------------------------| | S37=6 | 2400bps | |--------------+---------------------------------------------| | S37=7 | V.23 mode | |--------------+---------------------------------------------| | S37=8 | 4800bps | |--------------+---------------------------------------------| | S37=9 | 9600bps | |--------------+---------------------------------------------| | S37=10 | 12.0Kbps | |--------------+---------------------------------------------| | S37=11 | 14.4Kbps | |--------------+---------------------------------------------| | S37=12 | 7200bps | +------------------------------------------------------------+ RESULT CODES +------------------------------------------------------------+ | BASIC RESULT CODES | |------------------------------------------------------------| | Numeric | Verbose | Wn | Function | |---------+--------------+----+------------------------------| | 0 | OK | W0 | Modem has successfully | | | | | executed the previous | | | | | command and has returned to | | | | | the on-line command state. | |---------+--------------+----+------------------------------| | 1 | CONNECT | W0 | Connection established at | | | | | unspecified rate. | |---------+--------------+----+------------------------------| | 2 | RING | W0 | Incoming ring detected. | |---------+--------------+----+------------------------------| | 3 | NO CARRIER | W0 | Carrier signal lost or no | | | | | connection established. | |---------+--------------+----+------------------------------| | 4 | ERROR | W0 | Last command issued was not | | | | | valid. | |---------+--------------+----+------------------------------| | 5 | CONNECT 1200 | W0 | Connection established at | | | | | 1200bps. | |---------+--------------+----+------------------------------| | 6 | NO DIALTONE | W0 | No dial tone was detected | | | | | within the time allotted by | | | | | S7. | |---------+--------------+----+------------------------------| | 7 | BUSY | W0 | A busy tone was detected | | | | | after dialing. | |---------+--------------+----+------------------------------| | 8 | NO ANSWER | W0 | No quiet answer (ring-back | | | | | followed by silence) was | | | | | detected. | |---------+--------------+----+------------------------------| | 9 | CONNECT 600 | WO | Connection established at | | | | | 600bps | |---------+--------------+----+------------------------------| | 10 | CONNECT 2400 | W0 | Connection established at | | | | | 2400bps. | |---------+--------------+----+------------------------------| | 11 | CONNECT 4800 | W0 | Connection established at | | | | | 4800bps. | |---------+--------------+----+------------------------------| | 12 | CONNECT 9600 | W0 | Connection established at | | | | | 9600bps. | |---------+--------------+----+------------------------------| | 13 | CONNECT 7200 | WO | Connected as data modem | | | | | during answer. | |---------+--------------+----+------------------------------| | 14 | CONNECT | WO | Connection established at | | | 12000 | | 12000bps. | |---------+--------------+----+------------------------------| | 15 | CONNECT | W0 | Connection established at | | | 14400 | | 14.4K bps. | |---------+--------------+----+------------------------------| | 16 | CONNECT | W0 | Connection established at | | | 19200 | | 19.2K bps. | |---------+--------------+----+------------------------------| | 17 | CONNECT | W0 | Connection established at | | | 38400 | | 38.4K bps. | |---------+--------------+----+------------------------------| | 18 | CONNECT | W0 | Connection established at | | | 57600 | | 57.6K bps. | |---------+--------------+----+------------------------------| | 19 | CONNECT | W0 | Connection established at | | | 115200 | | 115.2K bps. | +------------------------------------------------------------+ +------------------------------------------------------------+ | BASIC RESULT CODES (cont'd) | |------------------------------------------------------------| | Numeric | Verbose | Wn | Function | |---------+--------------+----+------------------------------| | 22 | CONNECT | W0 | Connection established at | | | 75/1200 | | transmit 75/receive 1200bps. | |---------+--------------+----+------------------------------| | 23 | CONNECT | W0 | Connection established at | | | 1200/75 | | transmit 1200/receive 75bps. | |---------+--------------+----+------------------------------| | 24 | DELAYED | WO | Connection fails and number | | | | | dialed is "delayed" due to | | | | | country blacklisting. | |---------+--------------+----+------------------------------| | 32 | BLACKLISTED | WO | Connection failed and the | | | | | number dialed is considered | | | | | "blacklisted" | |---------+--------------+----+------------------------------| | 33 | FAX | W0 | Fax connection established. | |---------+--------------+----+------------------------------| | 35 | DATA | W0 | Data connection established. | +------------------------------------------------------------+ +------------------------------------------------------------+ | EXTENDED RESULT CODES | |------------------------------------------------------------| | Numeric | Verbose | Wn | Function | |---------+--------------+----+------------------------------| | 40 | CARRIER 300 | W1 | Carrier signal at 300bps is | | | | | detected. | |---------+--------------+----+------------------------------| | 44 | CARRIER | W1 | Carrier signal at transmit | | | 1200/75 | | 1200/receive 75bps is | | | | | detected. | |---------+--------------+----+------------------------------| | 45 | CARRIER | W1 | Carrier signal at transmit | | | 75/1200 | | 1200/receive 75bps is | | | | | detected. | |---------+--------------+----+------------------------------| | 46 | CARRIER 1200 | W1 | Carrier signal at 1200bps is | | | | | detected. | |---------+--------------+----+------------------------------| | 47 | CARRIER 2400 | W1 | Carrier signal at 2400bps is | | | | | detected. | |---------+--------------+----+------------------------------| | 48 | CARRIER 4800 | W1 | Carrier signal at 4800bps is | | | | | detected. | |---------+--------------+----+------------------------------| | 49 | CARRIER 7200 | W1 | Carrier signal at 7200bps is | | | | | detected. | |---------+--------------+----+------------------------------| | 50 | CARRIER 9600 | W1 | Carrier signal at 9600bps is | | | | | detected. | |---------+--------------+----+------------------------------| | 51 | CARRIER | W1 | Carrier signal at 12.0K bps | | | 12000 | | is detected. | |---------+--------------+----+------------------------------| | 52 | CARRIER | W1 | Carrier signal at 14.4K bps | | | 14400 | | is detected. | |---------+--------------+----+------------------------------| | 53 | CARRIER | W1 | Carrier signal at 16.8K bps | | | 16800 | | is detected. | |---------+--------------+----+------------------------------| | 54 | CARRIER | W1 | Carrier signal at 19.2K bps | | | 19200 | | is detected. | |---------+--------------+----+------------------------------| | 55 | CARRIER | W1 | Carrier signal at 21.6K bps | | | 21600 | | is detected. | |---------+--------------+----+------------------------------| | 56 | CARRIER | W1 | Carrier signal at 24.0K bps | | | 24000 | | is detected. | |---------+--------------+----+------------------------------| | 57 | CARRIER | W1 | Carrier signal at 26.4K bps | | | 26400 | | is detected. | |---------+--------------+----+------------------------------| | 58 | CARRIER | W1 | Carrier signal at 28.8K bps | | | 28800 | | is detected. | |---------+--------------+----+------------------------------| | 59 | CONNECT | W0 | Connection established at | | | 16800 | | 16.8K bps. | |---------+--------------+----+------------------------------| | 61 | CONNECT | W0 | Connection established at | | | 21600 | | 21.6K bps. | |---------+--------------+----+------------------------------| | 62 | CONNECT | W0 | Connection established at | | | 24000 | | 24.0K bps. | |---------+--------------+----+------------------------------| | 63 | CONNECT | W0 | Connection established at | | | 26400 | | 26.4K bps. | |---------+--------------+----+------------------------------| | 64 | CONNECT | W0 | Connection established at | | | 28800 | | 28.8K bps. | |---------+--------------+----+------------------------------| | 66 | COMPRESSION: | W1 | MNP Class 5 data compression | | | CLASS 5 | | was negotiated. | |---------+--------------+----+------------------------------| | 67 | COMPRESSION: | W1 | V.42bis data compression was | | | V.42BIS | | negotiated. | |---------+--------------+----+------------------------------| | 69 | COMPRESSION: | W1 | No data compression was | | | NONE | | negotiated. | |---------+--------------+----+------------------------------| | 70 | PROTOCOL: | W1 | No protocol was negotiated. | | | NONE | | | |---------+--------------+----+------------------------------| | 77 | PROTOCOL: | W1 | V.42 LAPM error-control was | | | LAP-M | | negotiated. | |---------+--------------+----+------------------------------| | 80 | PROTOCOL: | W1 | MNP error-control was | | | ALT | | negotiated. | |---------+--------------+----+------------------------------| | 81 | PROTOCOL: | W1 | Modem connected in the MNP10 | | | ALT-CELLULAR | | mode. | +------------------------------------------------------------+