DIGICOM SYSTEMS
===============

   SCOUT PLUS (INTERNAL)

   Card Type              Modem, Fax                              
   Chip Set               Unidentified                            
   I/O Options            Line in (RJ-11), line out (RJ11)        
   Maximum Modem Rate     14.4Kbps                                
   Maximum Fax Rate       9600bps                                 
   Data Modulation        Bell 212A, ITU-T V.22, V.22bis, V.32,   
   Protocol               V.32bis                                 
   Fax Modulation         V.27ter, V.29                           
   Protocol               
   Error                  MNP5, V.42, V42bis                      
   Correction/Compression 
   Fax Class              Class I & II                            
   Data Bus               8-bit ISA                               

<gopher://bitreich.org/I/th99/t/C-D/54682-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |        Function        |  Label  |   Function   |  Label   |
   |------------------------------------------------------------|
   | RJ-11 line                  |   CN1    | RJ-11 line | CN2  |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |                Function                | Label | Position  |
   |----------------------------------------+-------+-----------|
   | Normal operation enabled               | SW1/1 |    On     |
   |----------------------------------------+-------+-----------|
   | Modem reset                            | SW1/1 |    Off    |
   |----------------------------------------+-------+-----------|
   | i Factory configured - do not alter    | SW1/2 |    Off    |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                    SERIAL PORT ADDRESS                     |
   |------------------------------------------------------------|
   |      Setting       |       SW1/3       |       SW1/4       |
   |--------------------+-------------------+-------------------|
   |    COM1 (3F8h)     |        Off        |        Off        |
   |--------------------+-------------------+-------------------|
   |    COM2 (2F8h)     |        On         |        Off        |
   |--------------------+-------------------+-------------------|
   |    COM3 (3E8h)     |        Off        |        On         |
   |--------------------+-------------------+-------------------|
   |    COM4 (2E8h)     |        On         |        On         |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                   SUPPORTED COMMAND SET                    |
   |------------------------------------------------------------|
   |                     Basic AT Commands                      |
   |------------------------------------------------------------|
   | AT, A/, +++                                                |
   |------------------------------------------------------------|
   | A, E, H, M, 0, V, Z                                        |
   |------------------------------------------------------------|
   | &F, &T, &Z                                                 |
   |------------------------------------------------------------|
   |                                                            |
   |------------------------------------------------------------|
   |                        S Registers                         |
   |------------------------------------------------------------|
   | S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12,     |
   | S18, S25, S26                                              |
   |------------------------------------------------------------|
   |                                                            |
   |------------------------------------------------------------|
   | Note: See MHI Help file for full command documentation.    |
   +------------------------------------------------------------+

                     PROPRIETARY AT COMMAND SET

     For a full command summary see DIGICOM SYSTEMS, SCOUT PLUS
                             (EXTERNAL)