DIGICOM SPA =========== TINTORETTO LAN Card Type ISDN LAN Chip Set Unidentified I/O Options Power, RJ-45 connectors (4) ISDN Rate 128Kbps Maximum Fax Rate 14.4Kbps ISDN Modulation Protocol V.110, V.120, PPP, MLPPP Error Correction/Compression V.42bis Fax Class Class I Data Bus External +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |------------------------------------------------------------| | DC power | CN1 | HUB LAN | CN4 | | | | port | | | | | (RJ-45 | | | | | connector) | | |-------------------------------+---------+------------+-----| | Configuration port (RJ-45 | CN2 | ISDN | CN5 | | connector) | | interface | | | | | (RJ-45 | | | | | connector) | | |-------------------------------+---------+------------+-----| | PC LAN port (RJ-45 connector) | CN3 | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |-----+--------+----------+----------------------------------| | PWR | Green | On | Power is on and diagnostic test | | | | | has been passed | |-----+--------+----------+----------------------------------| | PWR | Green | Blinking | Power is on. Device is in BOOT | | | | | mode and is flashing EPROM | |-----+--------+----------+----------------------------------| | PWR | Red | On | Power is on. Device failed | | | | | diagnostic test | |-----+--------+----------+----------------------------------| | PWR | Yellow | On | Device is loading firmware in | | | | | RAM | |-----+--------+----------+----------------------------------| | PWR | Yellow | Blinking | Device is in BOOT mode | |-----+--------+----------+----------------------------------| | PWR | N/A | Off | Power is off | |-----+--------+----------+----------------------------------| | LAN | Green | On | LAN is connected and forwarding | |-----+--------+----------+----------------------------------| | LAN | Red | On | LAN connection is broken | |-----+--------+----------+----------------------------------| | LAN | Yellow | On | LAN is connected but not | | | | | forwarding. | |-----+--------+----------+----------------------------------| | B1 | Green | On | ISDN B1 channel is active; in | | | | | data mode | |-----+--------+----------+----------------------------------| | B1 | Yellow | On | ISDN B1 channel is active, but | | | | | not compressing data | |-----+--------+----------+----------------------------------| | B1 | Red | On | ISDN B1 channel connection is | | | | | being established | |-----+--------+----------+----------------------------------| | B1 | N/A | Off | ISDN B1 channel is inactive | |-----+--------+----------+----------------------------------| | B2 | Green | On | ISDN B2 channel is active; in | | | | | data mode | |-----+--------+----------+----------------------------------| | B2 | Yellow | On | ISDN B2 channel is active, but | | | | | not compressing data | |-----+--------+----------+----------------------------------| | B2 | Red | On | ISDN B2 channel connection is | | | | | being established | |-----+--------+----------+----------------------------------| | B2 | N/A | Off | ISDN B2 channel is inactive | +------------------------------------------------------------+ +---------------------------------------------------------+ | SUPPORTED COMMAND SET | |---------------------------------------------------------| | Basic AT Commands | |---------------------------------------------------------| | AT, A/ | |---------------------------------------------------------| | E, Q, V, W | |---------------------------------------------------------| | &C, &R, &Z | |---------------------------------------------------------| | S Registers | |---------------------------------------------------------| | S3, S4, S12, S25, S26 | |---------------------------------------------------------| | | |---------------------------------------------------------| | Note: See MHI Help File for full command documentation. | +---------------------------------------------------------+ PROPRIETARY AT COMMAND SET For a full command summary, see DIGICOM SPA TINTORETTO EXTERNAL