MOTOROLA, INC. ============== VANGUARD 300 Card Type Frame relay adapter, Ethernet router Processor Motorola 68360 Processor Speed Unidentified Chip Set Unidentified Maximum Onboard Memory 8MB DRAM/2MB Flash RAM I/O Options Serial ports (3) Network Transfer Rate 10Mbps DSU Transfer Rate 56Kbps ISDN Transfer Rate 64Kbps x 2 DSU Protocol DDS ISDN Protocol Unidentified Switch Type Unidentified Data Bus External Topology Linear Bus/Star Wiring Type Unshielded twisted pair AUI transceiver via DB-15 port Boot ROM Not available +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |---------------------+-------+----------------------+-------| | Reset button | BT1 | DECconnect MMJ | CN4 | | | | connector or ISDN | | | | | connector (port 4) | | |---------------------+-------+----------------------+-------| | Lamp test button | BT2 | V.24 serial port | CN5 | | | | (port 3) | | |---------------------+-------+----------------------+-------| | Header for | CN1 | V.11, V.24, V.35, or | CN6 | | daughtercard | | V.36 serial port | | | | | (port 2) | | |---------------------+-------+----------------------+-------| | Unshielded twisted | CN2 | 120VAC power | CN7 | | pair connector | | | | |---------------------+-------+----------------------+-------| | AUI transceiver via | CN3 | Power switch | SW3 | | DB-15 port | | | | |------------------------------------------------------------| | Note:When LED4 is on, press the lamp test button to | | reset it. | | | | Port 1 is the daughterboard. | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |-----------------------------------------+-------+----------| |>> | Port 2 pin 22 used for ring | SW1/1 | Off | | | indicator | | | |---+-------------------------------------+-------+----------| | | Port 2 pin 22 used to enter test | SW1/1 | On | | | mode in DCE mode, ring indicator | | | | | in DTE mode | | | |---+-------------------------------------+-------+----------| |>> | Port 2 pin 25 used for test mode | SW1/2 | Off | | | indicator | | | |---+-------------------------------------+-------+----------| | | Port 2 pin 25 used for test mode | SW1/2 | On | | | indicator for DCE mode, busy out | | | | | for DTE mode | | | |---+-------------------------------------+-------+----------| |>> | Port 3 pin 22 used for ring | SW1/3 | Off | | | indicator | | | |---+-------------------------------------+-------+----------| | | Port 3 pin 22 used to enter test | SW1/3 | On | | | mode in DCE mode, ring indicator | | | | | in DTE mode | | | |---+-------------------------------------+-------+----------| |>> | Port 3 is normal serial port | SW1/4 | Off | |---+-------------------------------------+-------+----------| | | Port 3 is the PAD port (forces | SW1/4 | On | | | serial configuration to 9600bps, | | | | | no parity, 8 data bits, 1 stop | | | | | bit) | | | |---+-------------------------------------+-------+----------| |>> | Factory configured - do not alter | SW1/5 | Off | |---+-------------------------------------+-------+----------| |>> | Normal operation | SW1/6 | Off | |---+-------------------------------------+-------+----------| | | Reset entire configuration to | SW1/6 | On | | | factory defaults | | | |------------------------------------------------------------| | Note:To use SW1/6, power up the adapter, turn SW1/6 | | on, press the reset button, and turn SW1/9 back off | | again. | +------------------------------------------------------------+ +------------------------------------------------------------+ | CABLE TYPE | |------------------------------------------------------------| | Setting | J1 | J2 | J3 | |---------------------+------------+------------+------------| | Unshielded twisted | Pins 1 & 2 | Pins 1 & 2 | Pins 1 & 2 | | pair | closed | closed | closed | |---------------------+------------+------------+------------| | AUI transceiver via | Pins 2 & 3 | Pins 2 & 3 | Pins 2 & 3 | | DB-15 port | closed | closed | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | CABLE TYPE (CON'T) | |------------------------------------------------------------| | Setting | J4 | J5 | J6 | |---------------------+------------+------------+------------| | Unshielded twisted | Pins 1 & 2 | Pins 1 & 2 | Pins 1 & 2 | | pair | closed | closed | closed | |---------------------+------------+------------+------------| | AUI transceiver via | Pins 2 & 3 | Pins 2 & 3 | Pins 2 & 3 | | DB-15 port | closed | closed | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | DRAM | |------------------------------------------------------------| | Setting | On Board | S1 | |-------------------+-------------------+--------------------| | 4MB | 4MB | None | |-------------------+-------------------+--------------------| | 8MB | 4MB | (1) 4MB x 9 | +------------------------------------------------------------+ +------------------------------------------------------------+ | PORT 2 TYPE | |------------------------------------------------------------| | Setting | SW2/1 | SW2/2 | SW2/3 | SW2/4 | SW2/5 | SW2/6 | |----------+--------+--------+-------+-------+-------+-------| | V.11 DTE | Off | Off | Off | Off | Off | On | |----------+--------+--------+-------+-------+-------+-------| | V.11 DCE | Off | Off | Off | Off | Off | On | |----------+--------+--------+-------+-------+-------+-------| | V.24 DTE | On | On | On | On | On | Off | |----------+--------+--------+-------+-------+-------+-------| | V.24 DCE | On | On | On | On | On | Off | |----------+--------+--------+-------+-------+-------+-------| | V.35 DTE | Off | Off | Off | Off | Off | On | |----------+--------+--------+-------+-------+-------+-------| | V.35 DCE | Off | Off | Off | Off | Off | On | |----------+--------+--------+-------+-------+-------+-------| | V.36 DTE | Off | Off | Off | Off | Off | On | |----------+--------+--------+-------+-------+-------+-------| | V.36 DCE | Off | Off | Off | Off | Off | On | |----------+--------+--------+-------+-------+-------+-------| | DSU | Off | Off | Off | Off | Off | On | +------------------------------------------------------------+ +------------------------------------------------------------+ | PORT 2 TYPE (CON'T) | |------------------------------------------------------------| | Setting | SW2/7 | SW2/8 | U1 | |----------+----------+----------+---------------------------| | V.11 DTE | On | On | V.11 module in position 1 | |----------+----------+----------+---------------------------| | V.11 DCE | On | On | V.11 module in position 2 | |----------+----------+----------+---------------------------| | V.24 DTE | Off | Off | V.24 module in position 1 | |----------+----------+----------+---------------------------| | V.24 DCE | Off | Off | V.24 module in position 2 | |----------+----------+----------+---------------------------| | V.35 DTE | On | On | V.35 module in position 1 | |----------+----------+----------+---------------------------| | V.35 DCE | On | On | V.35 module in position 2 | |----------+----------+----------+---------------------------| | V.36 DTE | On | On | V.36 module in position 1 | |----------+----------+----------+---------------------------| | V.36 DCE | On | On | V.36 module in position 2 | |----------+----------+----------+---------------------------| | DSU | On | On | DSU module in position 1 | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) (RESET AND POWER-UP) | |------------------------------------------------------------| | LED1 | LED3 | Condition | |-----------+-----------+------------------------------------| | Blinking | Off | Adapter is loading software into | | | | DRAM from flash RAM | |-----------+-----------+------------------------------------| | Off | Blinking | Adapter is performing self-test | |-----------+-----------+------------------------------------| | Off | Off | Adapter is initializing | | | | configuration | |-----------+-----------+------------------------------------| | On | Off | Adapter is ready | |-----------+-----------+------------------------------------| | Off | On | Self-test failed | |------------------------------------------------------------| | Note:On reset or power-up, the LEDs should go | | through, in order, the first four actions shown | | above. If the adapter proceeds immediately to the | | fourth action, the code in the firmware is invalid. | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |-------+--------+----------+--------------------------------| | LED1 | Green | On | Software is running | |-------+--------+----------+--------------------------------| | LED1 | Green | Off | Software not running | |-------+--------+----------+--------------------------------| | LED1 | Green | Blinking | Software is downloading or | | | | | card is booting | |-------+--------+----------+--------------------------------| | LED2 | Green | On | Power is on | |-------+--------+----------+--------------------------------| | LED2 | Green | Off | Power is off | |-------+--------+----------+--------------------------------| | LED3 | Red | On | Test failed | |-------+--------+----------+--------------------------------| | LED3 | Red | Off | No test in progress or test | | | | | passed | |-------+--------+----------+--------------------------------| | LED3 | Red | Blinking | Test in progress | |-------+--------+----------+--------------------------------| | LED4 | Red | On | Processor did not reset timer | | | | | in set time | |-------+--------+----------+--------------------------------| | LED4 | Red | Off | Normal operation | |-------+--------+----------+--------------------------------| | LED5 | Yellow | On | Card is transmitting MARK | | | | | signal to port 1 | |-------+--------+----------+--------------------------------| | LED5 | Yellow | Off | Card is transmitting SPACE | | | | | signal to port 1 | |-------+--------+----------+--------------------------------| | LED6 | Yellow | On | Card is receiving MARK signal | | | | | from port 1 | |-------+--------+----------+--------------------------------| | LED6 | Yellow | Off | Card is receiving SPACE signal | | | | | from port 1 | |-------+--------+----------+--------------------------------| | LED7 | Yellow | On | Card is transmitting MARK | | | | | signal to port 2 | |-------+--------+----------+--------------------------------| | LED7 | Yellow | Off | Card is transmitting SPACE | | | | | signal to port 2 | |-------+--------+----------+--------------------------------| | LED8 | Yellow | On | Card is receiving MARK signal | | | | | from port 2 | |-------+--------+----------+--------------------------------| | LED8 | Yellow | Off | Card is receiving SPACE signal | | | | | from port 2 | |-------+--------+----------+--------------------------------| | LED9 | Yellow | On | Card is transmitting MARK | | | | | signal to port 3 | |-------+--------+----------+--------------------------------| | LED9 | Yellow | Off | Card is transmitting SPACE | | | | | signal to port 3 | |-------+--------+----------+--------------------------------| | LED10 | Yellow | On | Card is receiving MARK signal | | | | | from port 3 | |-------+--------+----------+--------------------------------| | LED10 | Yellow | Off | Card is receiving SPACE signal | | | | | from port 3 | |-------+--------+----------+--------------------------------| | LED11 | Yellow | On | Card is transmitting MARK | | | | | signal to port 4 | |-------+--------+----------+--------------------------------| | LED11 | Yellow | Off | Card is transmitting SPACE | | | | | signal to port 4 | |-------+--------+----------+--------------------------------| | LED12 | Yellow | On | Card is receiving MARK signal | | | | | from port 4 | |-------+--------+----------+--------------------------------| | LED12 | Yellow | Off | Card is receiving SPACE signal | | | | | from port 4 | |-------+--------+----------+--------------------------------| | LED13 | Yellow | On | Card is transmitting MARK | | | | | signal to network | |-------+--------+----------+--------------------------------| | LED13 | Yellow | Off | Card is transmitting SPACE | | | | | signal to network | |-------+--------+----------+--------------------------------| | LED14 | Yellow | On | Card is receiving MARK signal | | | | | from network | |-------+--------+----------+--------------------------------| | LED14 | Yellow | Off | Card is receiving SPACE signal | | | | | from network | +------------------------------------------------------------+ Card Type Serial I/O Options Serial port +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |--------------------+-------+-----------------------+-------| | V.11 V.24, V.35, | CN1 | Header to main board | CN2B | | V.36, or DSU port | | (on both front and | | | | | back of card) | | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |----------------------------------------+-------+-----------| |>> | Pin 22 used for ring indicator | P22 | Pins 2 & | | | | | 3 closed | |---+------------------------------------+-------+-----------| | | Pin 22 used to enter test mode | P22 | Pins 1 & | | | in DCE mode, ring indicator in | | 2 closed | | | DTE mode | | | |---+------------------------------------+-------+-----------| |>> | Pin 25 used for test mode | P25 | Pins 1 & | | | indicator | | 2 closed | |---+------------------------------------+-------+-----------| | | Pin 25 used for test mode | P25 | Pins 2 & | | | indicator for DCE mode, busy out | | 3 closed | | | for DTE mode | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT TYPE | |------------------------------------------------------------| | Setting | SW1/1 | SW1/2 | SW1/3 | SW1/4 | SW1/5 | SW1/6 | |----------+--------+--------+-------+-------+-------+-------| | V.11 DTE | Off | Off | Off | Off | Off | On | |----------+--------+--------+-------+-------+-------+-------| | V.11 DCE | Off | Off | Off | Off | Off | On | |----------+--------+--------+-------+-------+-------+-------| | V.24 DTE | On | On | On | On | On | Off | |----------+--------+--------+-------+-------+-------+-------| | V.24 DCE | On | On | On | On | On | Off | |----------+--------+--------+-------+-------+-------+-------| | V.35 DTE | Off | Off | Off | Off | Off | On | |----------+--------+--------+-------+-------+-------+-------| | V.35 DCE | Off | Off | Off | Off | Off | On | |----------+--------+--------+-------+-------+-------+-------| | V.36 DTE | Off | Off | Off | Off | Off | On | |----------+--------+--------+-------+-------+-------+-------| | V.36 DCE | Off | Off | Off | Off | Off | On | |----------+--------+--------+-------+-------+-------+-------| | DSU | Off | Off | Off | Off | Off | On | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT TYPE (CON'T) | |------------------------------------------------------------| | Setting | SW1/7 | SW1/8 | U1 | |----------+----------+----------+---------------------------| | V.11 DTE | On | On | V.11 module in position 1 | |----------+----------+----------+---------------------------| | V.11 DCE | On | On | V.11 module in position 2 | |----------+----------+----------+---------------------------| | V.24 DTE | Off | Off | V.24 module in position 1 | |----------+----------+----------+---------------------------| | V.24 DCE | Off | Off | V.24 module in position 2 | |----------+----------+----------+---------------------------| | V.35 DTE | On | On | V.35 module in position 1 | |----------+----------+----------+---------------------------| | V.35 DCE | On | On | V.35 module in position 2 | |----------+----------+----------+---------------------------| | V.36 DTE | On | On | V.36 module in position 1 | |----------+----------+----------+---------------------------| | V.36 DCE | On | On | V.36 module in position 2 | |----------+----------+----------+---------------------------| | DSU | On | On | DSU module in position 1 | +------------------------------------------------------------+ Card Type ISDN TA ISDN Transfer Rate 64Kbps x 2 ISDN Protocol Unidentified Switch Type Unidentified +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |---------------------------+--------+--------------+--------| | Line in/out | CN1 | Line in/out | CN3 | |---------------------------+--------+--------------+--------| | Header to main board (on | CN2B | | | | both front and back of | | | | | card) | | | | |------------------------------------------------------------| | Note:Two connectors are provided so the user can | | daisy-chain devices on the S/T bus. | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |----------------------------------------+-------+-----------| |>> | S/T bus not terminated | SW1 | Off | |---+------------------------------------+-------+-----------| | | S/T bus terminated | SW1 | On | +------------------------------------------------------------+ Card Type ISDN TA ISDN Transfer Rate 64Kbps x 2 ISDN Protocol Unidentified Switch Type Unidentified +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |----------+-------+---------------------------------+-------| | Line out | CN1 | Header to main board (on both | CN2B | | | | front and back of card) | | +------------------------------------------------------------+ VANGUARD 300 (DSU DAUGHTERCARD) Card Type DDS DSU DSU Transfer Rate 56Kbps Modulation Protocol Unidentified +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |----------+-------+---------------------------------+-------| | Line out | CN1 | Header to main board (on both | CN2B | | | | front and back of card) | | +------------------------------------------------------------+