MOTOROLA, INC. ============== FT100 M Card Type T1 CSU/DSU, Ethernet Chip Set Unidentified I/O Options Monitor ports, alarm port Network Transfer Rate 10Mbps Topology Star Wiring Type Unshielded twisted pair Transfer Rate 1.544Mbps Data Bus Serial Protocol AMI, B8ZS Frame Type SF, ESF +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |----------------------+-------+---------------------+-------| | Monitor receive | CN1 | Serial control port | CN6 | |----------------------+-------+---------------------+-------| | Monitor transmit | CN2 | DSX-1, RS-232, | CN7 | | | | RS-449, RS-530, or | | | | | V.35 serial data | | | | | port 2 (on | | | | | daughterboard) | | |----------------------+-------+---------------------+-------| | T1 interface | CN3 | DC power in | CN8 | |----------------------+-------+---------------------+-------| | UTP connector | CN4 | Alarm port (see | SC1 | | | | pinout below) | | |----------------------+-------+---------------------+-------| | DSX-1, RS-232, | CN5 | | | | RS-449, RS-530, or | | | | | V.35 serial data | | | | | port 1 (on | | | | | daughterboard) | | | | |------------------------------------------------------------| | Note:Standard serial ports are provided on included | | adapter cables. | +------------------------------------------------------------+ +------------------------------------------------------------+ | SC1 PINOUT | |------------------------------------------------------------| | Function | Pin | Function | Pin | |----------------------------+------+-----------------+------| | Normally closed connection | 1 | Signal common | 3 | |----------------------------+------+-----------------+------| | Normally open connection | 2 | Not used | 4 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |-------------------------------------+-------+--------------| |>> | Signal ground connected to | E1 | Pins 2 & 3 | | | chassis ground | | closed | |---+---------------------------------+-------+--------------| | | Signal ground not connected to | E1 | Pins 1 & 2 | | | chassis ground | | closed | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | S1/1 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | S1/2 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | S1/3 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | S1/4 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | S1/5 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | S1/6 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | S1/7 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | S1/8 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | S2/1 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | S2/2 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | S2/3 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | S2/4 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | S2/5 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | S2/6 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | S2/7 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | S2/8 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | S28/1 | On | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | S28/2 | On | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | S28/3 | On | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | S28/4 | On | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | S28/5 | On | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | S28/6 | On | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | S28/7 | On | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | S28/8 | Off | | | alter | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS (CON'T) | |------------------------------------------------------------| | Setting | Label | Position | |----------------------------------------+-------+-----------| |>> | One stop bit selected | S29/5 | On | |---+------------------------------------+-------+-----------| | | Two stop bits selected | S29/5 | Off | |---+------------------------------------+-------+-----------| |>> | 8 data bits selected | S29/6 | On | |---+------------------------------------+-------+-----------| | | 7 data bits selected | S29/6 | Off | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONTROL PORT CONFIGURATION | |------------------------------------------------------------| | Setting | E25 | E26 | E27 | |---------+------------------+---------------+---------------| |>> | DCE | Pins 1 & 2, 3 & | Pins 1 & 2, 3 | Pins 1 & 2, 3 | | | | 4 closed | & 4 closed | & 4 closed | |---+-----+------------------+---------------+---------------| | | DTE | Pins 1 & 3, 2 & | Pins 1 & 3, 2 | Pins 1 & 3, 2 | | | | 4 closed | & 4 closed | & 4 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT SPEED SELECTION | |------------------------------------------------------------| | Setting | S29/1 | S29/2 | |------------------------+-----------------+-----------------| | | 2400bps | Off | Off | |---+--------------------+-----------------+-----------------| | | 4800bps | Off | On | |---+--------------------+-----------------+-----------------| | | 9600bps | On | Off | |---+--------------------+-----------------+-----------------| |>> | 19.2Kbps | On | On | +------------------------------------------------------------+ +------------------------------------------------------------+ | DATA PARITY SELECTION | |------------------------------------------------------------| | Setting | S29/3 | S29/4 | |------------------------+-----------------+-----------------| |>> | Disabled | On | N/A | |---+--------------------+-----------------+-----------------| | | Even | Off | On | |---+--------------------+-----------------+-----------------| | | Odd | Off | Off | +------------------------------------------------------------+ +------------------------------------------------------------+ | FLOW CONTROL SELECTION | |------------------------------------------------------------| | Setting | S29/7 | S29/8 | |-----------------------------------+------------+-----------| |>> | Flow control disabled | On | On | |---+-------------------------------+------------+-----------| | | XON/XOFF flow control enabled | On | Off | |---+-------------------------------+------------+-----------| | | RTS/CTS flow control enabled | Off | On | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |------+-------+--------+------------------------------------| | TXD2 | Green | On | Data is being transmitted to port | | | | | 2 | |------+-------+--------+------------------------------------| | TXD2 | Green | Off | Data is not being transmitted to | | | | | port 2 | |------+-------+--------+------------------------------------| | RXD2 | Green | On | Data is being received from port 2 | |------+-------+--------+------------------------------------| | RXD2 | Green | Off | Data is not being received from | | | | | port 2 | |------+-------+--------+------------------------------------| | TXD1 | Green | On | Data is being transmitted to port | | | | | 1 | |------+-------+--------+------------------------------------| | TXD1 | Green | Off | Data is not being transmitted to | | | | | port 1 | |------+-------+--------+------------------------------------| | RXD1 | Green | On | Data is being received from port 1 | |------+-------+--------+------------------------------------| | RXD1 | Green | Off | Data is not being received from | | | | | port 1 | |------+-------+--------+------------------------------------| | YEL | Red | On | Yellow alarm condition detected | |------+-------+--------+------------------------------------| | YEL | Red | Off | Yellow alarm condition not | | | | | detected | |------+-------+--------+------------------------------------| | AIS | Red | On | All Ones Signal detected | |------+-------+--------+------------------------------------| | AIS | Red | Off | All Ones Signal not detected | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) (CON'T) | |------------------------------------------------------------| | LED | Color | Status | Condition | |-----+-------+--------+-------------------------------------| | LOS | Red | On | Loss of signal detected | |-----+-------+--------+-------------------------------------| | LOS | Red | Off | Loss of signal not detected | |-----+-------+--------+-------------------------------------| | SYN | Green | On | Valid framing pattern received from | | | | | T1 interface | |-----+-------+--------+-------------------------------------| | SYN | Green | Off | Valid framing pattern not received | | | | | from T1 interface | |-----+-------+--------+-------------------------------------| | PWR | Green | On | Power is on | |-----+-------+--------+-------------------------------------| | PWR | Green | Off | Power is off | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |----------------------------------------+-------+-----------| |>> | Factory configured - do not alter | SW1 | Off | |---+------------------------------------+-------+-----------| |>> | Factory configured - do not alter | SW2 | Off | |---+------------------------------------+-------+-----------| |>> | Factory configured - do not alter | SW3 | On | |---+------------------------------------+-------+-----------| |>> | Factory configured - do not alter | SW4 | On | |---+------------------------------------+-------+-----------| |>> | Factory configured - do not alter | SW5 | Off | |---+------------------------------------+-------+-----------| |>> | Factory configured - do not alter | SW6 | On | |---+------------------------------------+-------+-----------| |>> | Factory configured - do not alter | SW7 | Off | |---+------------------------------------+-------+-----------| |>> | Factory configured - do not alter | SW8 | Off | +------------------------------------------------------------+ +------------------------------------------------------------+ | MISCELLANEOUS TECHNICAL NOTES | |------------------------------------------------------------| | Diagram not available. | +------------------------------------------------------------+ FT100 M (RS-449/530 INTERFACE) +------------------------------------------------------------+ | MISCELLANEOUS TECHNICAL NOTES | |------------------------------------------------------------| | Diagram not available. | | | | The card's jumper(s) must be set for Test Mode | | operation. | +------------------------------------------------------------+