PRACTICAL PERIPHERALS, INC. =========================== PC144MT II/MC144MT II Modem Type Data (synchronous/asynchronous)/Fax Maximum Data Rate 14.4Kbps Maximum Fax Rate 14.4Kbps Data Bus External Fax Class Class I & II Data Modulation Bell 103A/212A Protocol ITU-T V.21, V.22, V.22bis, V.32, V.32bis Fax Modulation ITU-T V.17, V.27ter, V.29 Protocol Error MNP5, V.42, V.42bis Correction/Compression +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Purpose | Location | Purpose | Location | |-----------------+----------+--------------------+----------| | Line in | CN1 | RS-232/422 | CN4 | |-----------------+----------+--------------------+----------| | Line out | CN2 | Power switch | SW1 | |-----------------+----------+--------------------+----------| | DC Power | CN3 | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |-----+-------+----------+-----------------------------------| | AA | Red | On | Auto-answer enabled | |-----+-------+----------+-----------------------------------| | AA | Red | Off | Auto-answer disabled | |-----+-------+----------+-----------------------------------| | AA | Red | Blinking | Line is ringing | |-----+-------+----------+-----------------------------------| | RX | Red | On | Modem is receiving data | |-----+-------+----------+-----------------------------------| | RX | Red | Off | Modem is not receiving data | |-----+-------+----------+-----------------------------------| | TX | Red | On | Modem is transmitting data | |-----+-------+----------+-----------------------------------| | TX | Red | Off | Modem is not transmitting data | |-----+-------+----------+-----------------------------------| | CD | Red | On | Carrier signal detected | |-----+-------+----------+-----------------------------------| | CD | Red | Off | Carrier signal not detected | |-----+-------+----------+-----------------------------------| | CD | Red | Blinking | Modem is retraining | |-----+-------+----------+-----------------------------------| | OH | Red | On | Modem is off-hook | |-----+-------+----------+-----------------------------------| | OH | Red | Off | Modem is on-hook | |-----+-------+----------+-----------------------------------| | HS | Red | On | Modem connected at 4800bps or | | | | | faster | |-----+-------+----------+-----------------------------------| | HS | Red | Off | Modem connected at less than | | | | | 4800bps | |-----+-------+----------+-----------------------------------| | TR | Red | On | DTR signal is high | |-----+-------+----------+-----------------------------------| | TR | Red | Off | DTR signal is low | |-----+-------+----------+-----------------------------------| | MR | Red | On | Power on | |-----+-------+----------+-----------------------------------| | MR | Red | Off | Power off | +------------------------------------------------------------+ Proprietary Command Set +------------------------------------------------------------+ | COMMAND SET DISABLE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] %DUMBn [cmds] | |--------------+---------------------------------------------| | Example: | AT %DUMB0 &W | |--------------+---------------------------------------------| | Description: | Stops modem from responding to commands. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| |>> %DUMB0 | Command set enabled. | |--------------+---------------------------------------------| | %DUMB1 | Command set disabled. | +------------------------------------------------------------+ +------------------------------------------------------------+ | REDIAL | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] DL | |--------------+---------------------------------------------| | Example: | AT M0 DL | |--------------+---------------------------------------------| | Description: | Redials the last number called. | +------------------------------------------------------------+ +------------------------------------------------------------+ | REPORT INFORMATION | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] In [cmds] | |--------------+---------------------------------------------| | Example: | AT IO | |--------------+---------------------------------------------| | Description: | Commands modem to display information | | | requested. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | I0 | Reports modem model and speed. | |--------------+---------------------------------------------| | I1 | Reports checksum number. | |--------------+---------------------------------------------| | I2 | Reports checksum result. | |--------------+---------------------------------------------| | I3 | Reports firmware version. | |--------------+---------------------------------------------| | I4 | Reports current command settings. | +------------------------------------------------------------+