PROMETHEUS PRODUCTS, INC. ========================= CYBERSTERO PC144IVA, CYBERSTERO PC144IVSPA Card Type Fax, Modem (asynchronous), Sound card Chip Set Unidentified I/O Options Audio line in, Audio line out, CD-ROM interface, Microphone, MIDI/game port, Speakerphone Maximum Modem Rate 14.4Kbps Maximum Fax Rate 14.4Kbps Data Bus 16-bit ISA Fax Class Class II Data Modulation Bell 103/212A Protocol ITU-T V.22, V.22bis, V.32, V.32bis Fax Modulation ITU-T V.27ter, V.29 Protocol Error MNP5, V.42, V.42bis Correction/Compression +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |------------------------------------------------------------| | CD-ROM connector | CN1 | Microphone | CN5 | |--------------------------+---------+----------------+------| | Audio line out | CN2 | Audio line in | CN6 | |--------------------------+---------+----------------+------| | Phone line out | CN3 | MIDI/game port | CN7 | |--------------------------+---------+----------------+------| | Phone line in | CN4 | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | DMA CHANNEL SELECTION | |------------------------------------------------------------| | Channel | JB4/I | JB4/J | JB4/K | JB4/L | |------------+-----------+-----------+-----------+-----------| | 0 | Off | On | On | Off | |------------+-----------+-----------+-----------+-----------| | i 1 | On | Off | Off | On | |------------+-----------+-----------+-----------+-----------| | 3 | On | Off | On | Off | |------------+-----------+-----------+-----------+-----------| | None | Off | On | Off | On | +------------------------------------------------------------+ +------------------------------------------------------------+ | I/O ADDRESS SELECTION | |------------------------------------------------------------| | Setting | JB4/A | JB4/B | JB4/C | JB4/D | |------------+-----------+-----------+-----------+-----------| | 220 | Off | On | Off | On | |------------+-----------+-----------+-----------+-----------| | 230 | Off | On | On | Off | |------------+-----------+-----------+-----------+-----------| | i 240 | On | Off | Off | On | |------------+-----------+-----------+-----------+-----------| | 250 | On | Off | On | Off | +------------------------------------------------------------+ +------------------------------------------------------------+ | INTERRUPT SELECTION | |------------------------------------------------------------| | IRQ | JB4/E | JB4/F | JB4/G | JB4/H | |------------+-----------+-----------+-----------+-----------| | i IRQ5 | Off | On | On | Off | |------------+-----------+-----------+-----------+-----------| | IRQ7 | On | Off | Off | On | |------------+-----------+-----------+-----------+-----------| | IRQ9 | Off | On | Off | On | |------------+-----------+-----------+-----------+-----------| | IRQ10 | On | Off | On | Off | +------------------------------------------------------------+ +------------------------------------------------------------+ | JOYSTICK CONTROL | |------------------------------------------------------------| | Setting | JB4/M | JB4/N | |--------------------+-------------------+-------------------| | i Enabled | On | Off | |--------------------+-------------------+-------------------| | Disabled | Off | On | +------------------------------------------------------------+ +------------------------------------------------------------+ | MODEM CONTROL | |------------------------------------------------------------| | Setting | JB1/Pins 1 & 2 | JB1/Pins 3 & 4 | |------------------+--------------------+--------------------| | i Enabled | Closed | Open | |------------------+--------------------+--------------------| | Disabled | Open | Closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT ADDRESS SELECTION | |------------------------------------------------------------| | Setting | JB2/G | JB2/H | JB2/I | JB2/J | |---------------+-----------+----------+----------+----------| | COM1 (3F8h) | Off | On | Off | On | |---------------+-----------+----------+----------+----------| | COM2 (2F8h) | Off | On | On | Off | |---------------+-----------+----------+----------+----------| | i COM3 (3E8h) | On | Off | Off | On | |---------------+-----------+----------+----------+----------| | COM4 (2E8h) | On | Off | On | Off | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT 1 INTERRUPT SELECTION | |------------------------------------------------------------| | IRQ | JB2/A | JB2/B | JB2/C | JB2/D | JB2/E | JB2/F | |---------+--------+--------+--------+-------+-------+-------| | IRQ3 | On | Off | Off | Off | Off | Off | |---------+--------+--------+--------+-------+-------+-------| | IRQ4 | Off | On | Off | Off | Off | Off | |---------+--------+--------+--------+-------+-------+-------| | IRQ5 | Off | Off | On | Off | Off | Off | |---------+--------+--------+--------+-------+-------+-------| | IRQ7 | Off | Off | Off | On | Off | Off | |---------+--------+--------+--------+-------+-------+-------| | i IRQ10 | Off | Off | Off | Off | On | Off | |---------+--------+--------+--------+-------+-------+-------| | IRQ11 | Off | Off | Off | Off | Off | On | +------------------------------------------------------------+ +------------------------------------------------------------+ | SOUND CARD CONTROL | |------------------------------------------------------------| | Setting | JB3/Pins 1 & 2 | JB3/Pins 3 & 4 | |------------------+--------------------+--------------------| | i Enabled | Closed | Open | |------------------+--------------------+--------------------| | Disabled | Open | Closed | +------------------------------------------------------------+ Proprietary AT Command Set +------------------------------------------------------------+ | AUTO-RELIABLE TIME BUFFER CONFIGURATION | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Cn [cmds] | |--------------+---------------------------------------------| | Description: | Controls the handling of incoming data | | | during auto-reliable time period | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \C0 | Data is discarded | |--------------+---------------------------------------------| | \C1 | Data is buffered | |--------------+---------------------------------------------| | \C2 | Data is discarded; modem returns to normal | | | mode on receiving auto-reliable fallback | | | character. | +------------------------------------------------------------+ +------------------------------------------------------------+ | AUTO-RETRAIN - AUTO-FALLBACK/FALL-FORWARD | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] %En [cmds] | |--------------+---------------------------------------------| | Description: | Controls auto-retrain mode and | | | fallback/fall-forward | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | %E0 | Auto-retrain disabled | |--------------+---------------------------------------------| | %E1 | Auto-retrain enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | BREAK TYPE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Kn [cmds] | |--------------+---------------------------------------------| | Description: | Configures action of break signal | |------------------------------------------------------------| | Command | Function | |---------------+--------------------------------------------| | \K0 | Online command mode enabled, send no break | | | to remote modem | |---------------+--------------------------------------------| | \K1 | Break sent to remote modem and buffered | | | cleared | |---------------+--------------------------------------------| | \K2 | Online command mode enabled, send no break | | | to remote modem | |---------------+--------------------------------------------| | \K3 | Send break to remote modem immediately | |---------------+--------------------------------------------| | \K4 | Online command mode enabled, send no break | | | to remote modem | |---------------+--------------------------------------------| | \K5 | Send break with transmitted data | +------------------------------------------------------------+ +------------------------------------------------------------+ | BUFFER SIZE - LOWER LIMIT | |------------------------------------------------------------| | Type: | Register | |--------------+---------------------------------------------| | Format: | AT [cmds] S49=n [cmds] | |--------------+---------------------------------------------| | Default: | 10 | |--------------+---------------------------------------------| | Range: | 0-255 | |--------------+---------------------------------------------| | Unit: | 1 byte | |--------------+---------------------------------------------| | Description: | Controls the low-end size of the buffer | | | during error-control mode | +------------------------------------------------------------+ +------------------------------------------------------------+ | BUFFER SIZE - UPPER LIMIT | |------------------------------------------------------------| | Type: | Register | |--------------+---------------------------------------------| | Format: | AT [cmds] S50=n [cmds] | |--------------+---------------------------------------------| | Default: | 200 | |--------------+---------------------------------------------| | Range: | 2-255 | |--------------+---------------------------------------------| | Unit: | 1 byte | |--------------+---------------------------------------------| | Description: | Controls the high-end size of the buffer | | | during error-control mode | +------------------------------------------------------------+ +------------------------------------------------------------+ | COMPRESSION | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] %Cn [cmds] | |--------------+---------------------------------------------| | Description: | Selects data compression | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | %C0 | Data compression disabled | |--------------+---------------------------------------------| | %C1 | MNP5 enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONNECT MODE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Nn [cmds] | |--------------+---------------------------------------------| | Description: | Controls the type of connection the modem | | | will operate in | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \N0 | Normal mode enabled | |--------------+---------------------------------------------| | \N1 | Direct mode enabled | |--------------+---------------------------------------------| | \N2 | MNP reliable mode enabled | |--------------+---------------------------------------------| | \N3 | Auto-reliable mode enabled | |--------------+---------------------------------------------| | \N4 | V.42 reliable mode enabled | |--------------+---------------------------------------------| | \N5 | V.42 auto-reliable mode enabled | |--------------+---------------------------------------------| | \N6 | Reliable mode enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAL | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] D<#> [cmds] | |--------------+---------------------------------------------| | Description: | Dials telephone number according to any | | | modifiers included in the string | |--------------+---------------------------------------------| | Note: | Any combination of modifiers can be used to | | | produce the desired dial functions in | | | sequence. | |--------------+---------------------------------------------| | Modifier | Function | |--------------+---------------------------------------------| | L | Re-dial last number | |--------------+---------------------------------------------| | P | Pulse dialing enabled | |--------------+---------------------------------------------| | Sn | Dial stored telephone number n | |--------------+---------------------------------------------| | T | Tone dialing enabled | |--------------+---------------------------------------------| | W | Dialing resumed following dial tone | | | detection for amount of time specified in | | | S7 register | |--------------+---------------------------------------------| | , | Dialing paused for amount of time specified | | | in S8 register | |--------------+---------------------------------------------| | ! | Modem commanded to go off-hook for .5 | | | second before returning on-hook | |--------------+---------------------------------------------| | @ | Wait for quiet answer for amount of time | | | specified in S7 register | |--------------+---------------------------------------------| | ; | Modem returned to command state after | | | dialing | +------------------------------------------------------------+ +------------------------------------------------------------+ | DICTIONARY SIZE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] %Dn [cmds] | |--------------+---------------------------------------------| | Description: | Select dictionary size | |------------------------------------------------------------| | Command | Function | |------------------+-----------------------------------------| | %D0 | Select 1/2K bytes | |------------------+-----------------------------------------| | %D1 | Select 1K bytes | |------------------+-----------------------------------------| | %D2 | Select 2K bytes | +------------------------------------------------------------+ +------------------------------------------------------------+ | EXTENDED RESULT CODES | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Vn [cmds] | |--------------+---------------------------------------------| | Description: | Selects extended result codes | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \V0 | Extended result codes disabled | |--------------+---------------------------------------------| | \V1 | Extended result codes enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | FLOW CONTROL | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Gn [cmds] | |--------------+---------------------------------------------| | Description: | Selects modem port flow control | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \G0 | Flow control disabled | |--------------+---------------------------------------------| | \G1 | Flow control enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | FLOW CONTROL TYPE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Qn [cmds] | |--------------+---------------------------------------------| | Description: | Sets type of flow control used by modem | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \Q0 | Flow control disabled | |--------------+---------------------------------------------| | \Q1 | XON/XOFF, bi-directional RTS/CTS flow | | | control enabled | |--------------+---------------------------------------------| | \Q2 | Unidirectional CTS flow control enabled | |--------------+---------------------------------------------| | \Q3 | Bi-directional RTS/CTS flow control enabled | |--------------+---------------------------------------------| | \Q4 | Unidirectional XON/XOFF flow control by DCE | | | enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | INACTIVITY TIMER | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Tn [cmds] | |--------------+---------------------------------------------| | Default: | 0 | |--------------+---------------------------------------------| | Range: | 0-90 | |--------------+---------------------------------------------| | Unit: | 1 minute | |--------------+---------------------------------------------| | Description: | Sets the length of time that the modem does | | | not receive information before it | | | disconnects. | |--------------+---------------------------------------------| | Note: | AT\T0 will disable timer. | +------------------------------------------------------------+ +------------------------------------------------------------+ | REPORT INFORMATION | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] In [cmds] | |--------------+---------------------------------------------| | Description: | Displays information requested | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | I0 | Reports product code | |--------------+---------------------------------------------| | I1 | Reports ROM checksum | |--------------+---------------------------------------------| | I2 | Tests and reports ROM checksum | |--------------+---------------------------------------------| | I3 | Reports firmware revision | |--------------+---------------------------------------------| | I4 | Reports current configuration | +------------------------------------------------------------+ +------------------------------------------------------------+ | XON/XOFF PASS-THROUGH | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Xn [cmds] | |--------------+---------------------------------------------| | Description: | Selects whether XON/XOFF signals are sent | | | to remote modem | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \X0 | XON/XOFF signals trapped by local modem | |--------------+---------------------------------------------| | \X1 | XON/XOFF passed through local modem | +------------------------------------------------------------+