PURETEK INDUSTRIAL CO, INC. =========================== 14400BPS FAX/MODEM ADAPTER (EXT) Card Type Fax, Modem (asynchronous) Chip Set Unidentified Maximum Data Rate 14.4Kbps Maximum Fax Rate 14.4Kbps Data Bus External Fax Class Class I & II Data Modulation Bell 103/212A Protocol ITU-T V.21, V.22, V.22bis, V.23, V.25, V.32, V.32bis Fax Modulation ITU-T V.17, V.21CH2, V.27ter, V.29 Protocol Error MNP5, V.42, V.42bis Correction/Compression +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |------------------------------------------------------------| | DC power | CN1 | Line out | CN3 | |-----------------------------+------------+----------+------| | RS-232/422 | CN2 | Line in | CN4 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |-----------------------------------------+-------+----------| | i DTR normal | SW1/1 | Off | |-----------------------------------------+-------+----------| | Modem ignores DTR | SW1/1 | On | |-----------------------------------------+-------+----------| | i Verbose result codes | SW1/2 | Off | |-----------------------------------------+-------+----------| | Numeric result codes | SW1/2 | On | |-----------------------------------------+-------+----------| | i Result code display enabled | SW1/3 | On | |-----------------------------------------+-------+----------| | Result code display disabled | SW1/3 | Off | |-----------------------------------------+-------+----------| | i Local echo enabled | SW1/4 | Off | |-----------------------------------------+-------+----------| | Local echo disabled | SW1/4 | On | |-----------------------------------------+-------+----------| | i Auto answer disabled | SW1/5 | On | |-----------------------------------------+-------+----------| | Auto answer enabled | SW1/5 | Off | |-----------------------------------------+-------+----------| | i CD signal normal | SW1/6 | Off | |-----------------------------------------+-------+----------| | CD forced high | SW1/6 | On | |-----------------------------------------+-------+----------| | i Load Y or Y1 configuration from NVRAM | SW1/7 | Off | |-----------------------------------------+-------+----------| | Load &F0 generic template configuration | SW1/7 | On | | from ROM | | | |-----------------------------------------+-------+----------| | i Smart mode | SW1/8 | On | |-----------------------------------------+-------+----------| | Dumb mode | SW1/8 | Off | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |---------+-------+----------+-------------------------------| | AA | Red | On | Auto-answer enabled | |---------+-------+----------+-------------------------------| | AA | Red | Off | Auto-answer disabled | |---------+-------+----------+-------------------------------| | AA | Red | Blinking | Phone is ringing | |---------+-------+----------+-------------------------------| | CD | Red | On | Carrier signal detected | |---------+-------+----------+-------------------------------| | CD | Red | Off | Carrier signal not detected | |---------+-------+----------+-------------------------------| | RD | Red | On | Modem is receiving data | |---------+-------+----------+-------------------------------| | RD | Red | Off | Modem is not receiving data | |---------+-------+----------+-------------------------------| | SD | Red | On | Modem is transmitting data | |---------+-------+----------+-------------------------------| | SD | Red | Off | Modem is not transmitting | | | | | data | |---------+-------+----------+-------------------------------| | TR | Red | On | DTR signal is high | |---------+-------+----------+-------------------------------| | TR | Red | Off | DTR signal is low | |---------+-------+----------+-------------------------------| | CS | Red | On | CTS forced high and transmit | | | | | hardware flow control enabled | |---------+-------+----------+-------------------------------| | CS | Red | Off | CTS forced low and transmit | | | | | hardware flow control | | | | | disabled | |---------+-------+----------+-------------------------------| | ARQ/FAX | Red | On | Data mode; error correction | | | | | enabled | |---------+-------+----------+-------------------------------| | ARQ/FAX | Red | Off | Data and Fax mode; error | | | | | correction and fax disabled | |---------+-------+----------+-------------------------------| | ARQ/FAX | Red | Blinking | Data mode; retransmitting | | | | | data to remote | | | | | | | | | | Fax mode; fax mode enabled | +------------------------------------------------------------+ +---------------------------------------------------------+ | SUPPORTED COMMAND SET | |---------------------------------------------------------| | Basic AT Commands | |---------------------------------------------------------| | AT, '+++', A/ | |---------------------------------------------------------| | A, B, E, G, H, L, M, T, V | |---------------------------------------------------------| | S Registers | |---------------------------------------------------------| | S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12 | |---------------------------------------------------------| | Note: See MHI Help file for full command documentation. | +---------------------------------------------------------+ Proprietary AT Command Set For a full command summary, see PURETEK INDUSTRIAL CO, INC.14400BPS FAX/MODEM ADAPTER (INT)