RAD DATA COMMUNICATIONS ======================= CMN-C8 Card Type Modem (synchronous/asynchronous) Chipset Unidentified Maximum Data Rate 19.2Kbps Data Modulation Unidentified Data Bus Proprietary +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |---------------------+-------+----------------------+-------| | Serial data port | CN1 | Loopback test switch | SW4 | |---------------------+-------+----------------------+-------| | Telephone line out | CN2 | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |----------------------------------------+-------+-----------| | i Front panel switch may initiate | JP1 | Pins 1 & | | remote loopback test | | 2 closed | |----------------------------------------+-------+-----------| | Front panel switch may not initiate | JP1 | Pins 3 & | | remote loopback test | | 4 closed | |----------------------------------------+-------+-----------| | i Stop bit shortening for asynchronous | SW1/1 | Off | | mode set to 12.5% | | | |----------------------------------------+-------+-----------| | Stop bit shortening for asynchronous | SW1/1 | On | | mode set to 25% | | | |----------------------------------------+-------+-----------| | i DCD forced high | SW1/4 | On | |----------------------------------------+-------+-----------| | DCD follows RTS | SW1/4 | Off | |----------------------------------------+-------+-----------| | i Pin 18 of CN1 has no function | SW1/5 | Off | |----------------------------------------+-------+-----------| | Pin 18 of CN1 begins local analog | SW1/5 | On | | loopback test | | | |----------------------------------------+-------+-----------| | i Pin 21 of CN1 has no function | SW1/6 | Off | |----------------------------------------+-------+-----------| | Pin 21 of CN1 begins remote digital | SW1/6 | On | | loopback test | | | |----------------------------------------+-------+-----------| | i CN1 is DCE | SW3 | Off | |----------------------------------------+-------+-----------| | CN1 is DTE | SW3 | On | +------------------------------------------------------------+ +------------------------------------------------------------+ | TRANSMIT CLOCK SOURCE SELECTION | |------------------------------------------------------------| | Setting | JP2/A | JP2/B | JP2/C | JP2/D | |-------------------+----------+---------+---------+---------| | i Internal | Closed | Open | Open | Open | |-------------------+----------+---------+---------+---------| | External | Open | Closed | Open | Open | |-------------------+----------+---------+---------+---------| | Received | Open | Open | Closed | Open | |-------------------+----------+---------+---------+---------| | Asynchronous mode | Open | Open | Open | Closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | RTS TO CTS DELAY SELECTION | |------------------------------------------------------------| | Setting | JP3/A | JP3/B | JP3/C | |---------------+--------------+--------------+--------------| | 0 mS | Closed | Open | Open | |---------------+--------------+--------------+--------------| | 8 mS | Open | Closed | Open | |---------------+--------------+--------------+--------------| | 68 mS | Open | Open | Closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | DATA LENGTH SELECTION | |------------------------------------------------------------| | Setting | SW1/2 | SW1/3 | |--------------------+-------------------+-------------------| | 8 bits | Off | Off | |--------------------+-------------------+-------------------| | 9 bits | Off | On | |--------------------+-------------------+-------------------| | i 10 bits | On | Off | |--------------------+-------------------+-------------------| | 11 bits | On | On | +------------------------------------------------------------+ +------------------------------------------------------------+ | LINE SPEED SELECTION | |------------------------------------------------------------| | Setting | SW2 | |-----------------------------+------------------------------| | 1200bps | Position 7 | |-----------------------------+------------------------------| | 2400bps | Position 6 | |-----------------------------+------------------------------| | 3600bps | Position 5 | |-----------------------------+------------------------------| | 4800bps | Position 4 | |-----------------------------+------------------------------| | 7200bps | Position 3 | |-----------------------------+------------------------------| | i 9600bps | Position 2 | |-----------------------------+------------------------------| | 14.4Kbps | Position 1 | |-----------------------------+------------------------------| | 19.2Kbps | Position 0 | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |-------+---------+---------+--------------------------------| | PWR | Green | On | Power is on | |-------+---------+---------+--------------------------------| | PWR | Green | Off | Power is off | |-------+---------+---------+--------------------------------| | XMT | Yellow | On | Modem is transmitting data | |-------+---------+---------+--------------------------------| | XMT | Yellow | Off | Modem is not transmitting data | |-------+---------+---------+--------------------------------| | RCV | Yellow | On | Modem is receiving data | |-------+---------+---------+--------------------------------| | RCV | Yellow | Off | Modem is not receiving data | |-------+---------+---------+--------------------------------| | DCD | Yellow | On | Carrier signal detected | |-------+---------+---------+--------------------------------| | DCD | Yellow | Off | Carrier signal not detected | |-------+---------+---------+--------------------------------| | TST | Red | On | Modem is in test mode | |-------+---------+---------+--------------------------------| | TST | Red | Off | Modem is not in test mode | +------------------------------------------------------------+ +------------------------------------------------------------+ | MISCELLANEOUS TECHNICAL NOTE | |------------------------------------------------------------| | This card is intended for use in the CMN-16 rack-mount | | system. The bus is used only for supplying power for the | | card. All other card functions are accessed through the | | serial port. | +------------------------------------------------------------+