PATTON ELECTRONICS COMPANY
==========================

   1060

   Card Type         Modem                                        
   Chip Set          Unidentified                                 
   I/O Options       Power connector, 25-pin connector, terminal  
                     block                                        
                                                                  
                     network interface via RJ-11 connector        
   Wiring Type       RJ-11 shielded twisted pair                  
   Topology          Daisy chain, star                            
   Maximum Data Rate 115.2Kbps                                    
   Data Bus          External                                     

<gopher://bitreich.org/I/th99/t/P-R/54870-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |         Function          |   Label    | Function  | Label |
   |------------------------------------------------------------|
   | Power connector        |  CN1  | Network         |   CN4   |
   |                        |       | interface via   |         |
   |                        |       | RJ-11 connector |         |
   |------------------------+-------+-----------------+---------|
   | Terminal block         |  CN2  | Loopback test   |   SW1   |
   |                        |       | switch          |         |
   |------------------------+-------+-----------------+---------|
   | DTE/DCE serial port    |  CN3  |                 |         |
   | (25-pin connector)     |       |                 |         |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |               Setting               | Label |   Position   |
   |-------------------------------------+-------+--------------|
   | i Factory configured - do not alter | SW1/8 | Unidentified |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                          DTE/DCE                           |
   |------------------------------------------------------------|
   |             Function              |    SW3     |    SW4    |
   |-----------------------------------+------------+-----------|
   |    DTE (modem or multiplexer)     |     On     |    On     |
   |-----------------------------------+------------+-----------|
   |    DCE (PC, terminal or host)     |    Off     |    Off    |
   +------------------------------------------------------------+

+----------------------------------------------------------------------------+
|                            DCE MODE PARAMETERS                             |
|----------------------------------------------------------------------------|
|Control |Control|Voltage|Carrier|SW1/1|SW1/2|SW1/3| SW1/4 |SW1/5|SW1/6|SW1/7|
|        |  out  |       |Control|     |     |     |       |     |     |     |
|   in   |       |  out  |       |     |     |     |       |     |     |     |
|----------------------------------------------------------------------------|
|   4   |    8     |6 |  Disabled   | On | On  | On |Off | Off |  Off   |Off |
|-----------------------------------+----------------------------------------|
|  4   |    8    |  6   |  Enabled  |  On  | On  | On |Off |  Off   |Off |On |
|------+---------+------+-----------+------+-----+----+----+--------+----+---|
|4, 11,|    8    |  6   | Disabled  | Off  | On  | On | On |  Off   |Off |Off|
|  20  |         |      |           |      |     |    |    |        |    |   |
|------+---------+------+-----------+------+-----+----+----+--------+----+---|
|4, 11,|    8    |  6   |  Enabled  | Off  | On  | On | On |  Off   |Off |On |
|  20  |         |      |           |      |     |    |    |        |    |   |
|------+---------+------+-----------+------+-----+----+----+--------+----+---|
|  4   |    6    |  8   | Disabled  |  On  | Off |Off |Off |   On   | On |Off|
|------+---------+------+-----------+------+-----+----+----+--------+----+---|
|  4   |    6    |  8   |  Enabled  |  On  | Off |Off |Off |   On   | On |On |
|------+---------+------+-----------+------+-----+----+----+--------+----+---|
|4, 11,|    6    |  8   | Disabled  | Off  | Off |Off | On |   On   | On |Off|
|  20  |         |      |           |      |     |    |    |        |    |   |
|------+---------+------+-----------+------+-----+----+----+--------+----+---|
|4, 11,|    6    |  8   |  Enabled  | Off  | Off |Off | On |   On   | On |On |
|  20  |         |      |           |      |     |    |    |        |    |   |
|----------------------------------------------------------------------------|
|Note:|Multiple input pins are "or-tied." If input goes low, carrier is      |
|     |dropped. Multiple output pins generate the same signal simultaneously |
+----------------------------------------------------------------------------+

+-------------------------------------------------------------------------------+
|                              DTE MODE PARAMETERS                              |
|-------------------------------------------------------------------------------|
|Control|Control|Voltage|   Carrier   |SW1/1|SW1/2|SW1/3|SW1/4|SW1/5|SW1/6|SW1/7|
|       |  out  |       |   Control   |     |     |     |     |     |     |     |
|  in   |       |  out  |             |     |     |     |     |     |     |     |
|-------------------------------------------------------------------------------|
|     8     |   4   |  11, 20   | Disabled | On | On  | On | Off | Off  |Off|Off|
|-------------------------------------------------------------------------------|
|  8   |   4    |  11, 20  |   Enabled   | On | On  | On |Off|  Off   |Off | On |
|------+--------+----------+-------------+----+-----+----+---+--------+----+----|
|5, 6, |   4    |  11, 20  |  Disabled   |Off | On  | On |On |  Off   |Off |Off |
|  8   |        |          |             |    |     |    |   |        |    |    |
|------+--------+----------+-------------+----+-----+----+---+--------+----+----|
|5, 6, |   4    |  11, 20  |   Enabled   |Off | On  | On |On |  Off   |Off | On |
|  8   |        |          |             |    |     |    |   |        |    |    |
|------+--------+----------+-------------+----+-----+----+---+--------+----+----|
|  8   | 11, 20 |    4     |  Disabled   | On | Off |Off |Off|   On   | On |Off |
|------+--------+----------+-------------+----+-----+----+---+--------+----+----|
|  8   | 11, 20 |    4     |   Enabled   | On | Off |Off |Off|   On   | On | On |
|------+--------+----------+-------------+----+-----+----+---+--------+----+----|
|5, 6, | 11, 20 |    4     |  Disabled   |Off | Off |Off |On |   On   | On |Off |
|  8   |        |          |             |    |     |    |   |        |    |    |
|------+--------+----------+-------------+----+-----+----+---+--------+----+----|
|5, 6, | 11, 20 |    4     |   Enabled   |Off | Off |Off |On |   On   | On | On |
|  8   |        |          |             |    |     |    |   |        |    |    |
|-------------------------------------------------------------------------------|
|Note:|Multiple input pins are "or-tied." If input goes low, carrier is dropped.|
|     |Multiple output pins generate the same signal simultaneously             |
+-------------------------------------------------------------------------------+

   +------------------------------------------------------------+
   |                    MULTIPOINT TOPOLOGY                     |
   |------------------------------------------------------------|
   |     Setting      |SW1/1|SW1/2|SW1/3|SW1/4|SW1/5|SW1/6|SW1/7|
   |------------------------------------------------------------|
   |  Master positions   | On  |  On  | On | Off | Off  |Off|Off|
   |------------------------------------------------------------|
   |Slave positions |  On   |  On   | On |Off |  Off  |Off | On |
   |------------------------------------------------------------|
   |Note: These settings are used when the device is            |
   |daisy-chained                                               |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                     DIAGNOSTIC LED(S)                      |
   |------------------------------------------------------------|
   | LED |   Color   |  Status  |           Condition           |
   |-----+-----------+----------+-------------------------------|
   | PWR |   Green   |    On    |          Power is on          |
   |-----+-----------+----------+-------------------------------|
   | PWR |   Green   |   Off    |         Power is off          |
   |-----+-----------+----------+-------------------------------|
   | TD  |    Red    |    On    |    Low RS-232 logic level     |
   |-----+-----------+----------+-------------------------------|
   | TD  | Red/Green | Blinking |   Data is being transmitted   |
   |     |           |          |      (high logic level)       |
   |-----+-----------+----------+-------------------------------|
   | TD  |   None    |   Off    | Data is not being transmitted |
   |-----+-----------+----------+-------------------------------|
   | RD  |    Red    |    On    |    Low RS-232 logic level     |
   |-----+-----------+----------+-------------------------------|
   | RD  | Red/Green | Blinking | Data is being received (high  |
   |     |           |          |         logic level)          |
   |-----+-----------+----------+-------------------------------|
   | RD  |   None    |   Off    |  Data is not being received   |
   |-----+-----------+----------+-------------------------------|
   | IN  |    Red    |    On    |    Low signal detected on     |
   |     |           |          |   control input (pins vary    |
   |     |           |          |      according to switch      |
   |     |           |          |          selection)           |
   |-----+-----------+----------+-------------------------------|
   | IN  |   Green   |    On    |    High signal detected on    |
   |     |           |          |      control input pins       |
   |-----+-----------+----------+-------------------------------|
   | IN  |   None    |   Off    |  No signal being detected on  |
   |     |           |          |      control input pins       |
   |-----+-----------+----------+-------------------------------|
   | OUT |    Red    |    On    |    Low signal detected on     |
   |     |           |          |   control output (pins vary   |
   |     |           |          |      according to switch      |
   |     |           |          |          selection)           |
   |-----+-----------+----------+-------------------------------|
   | OUT |   Green   |    On    |    High signal detected on    |
   |     |           |          |      control output pins      |
   |-----+-----------+----------+-------------------------------|
   | OUT |   None    |   Off    |  No signal being detected on  |
   |     |           |          |      control input pins       |
   |-----+-----------+----------+-------------------------------|
   | TST |    Red    |    On    | Device is conducting LAL, or  |
   |     |           |          |  RAL test (depress switch to  |
   |     |           |          |           run test)           |
   |-----+-----------+----------+-------------------------------|
   | TST |    Red    |   Off    |  Device is not conducting a   |
   |     |           |          |             test              |
   +------------------------------------------------------------+