RAD DATA COMMUNICATIONS ======================= ASMI-31 MODEM/X.21 Card Type Modem Chip Set Unidentified I/O Options AC power connector, 15-pin connector, Network interface via terminal block and RJ-45 connector Wiring Type RJ-45 shielded twisted pair Terminal block shielded twisted pair Maximum Data Rate 128Kbps Line Coding 2B1Q Data Bus External +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |---------------------+-------+----------------------+-------| | AC power connector | CN1 | Network interface | CN4 | | | | via RJ-45 connector | | |---------------------+-------+----------------------+-------| | DTE serial port | CN2 | Reset push-button | RESET | | (15-pin connector) | | | | |---------------------+-------+----------------------+-------| | Network interface | CN3 | | | | via terminal block | | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |---------------------------------------+-------+------------| | i Loopback timing mode enabled | JP9 | Pins 3 & 4 | | | | closed | |---------------------------------------+-------+------------| | Internal clock mode enabled | JP9 | Pins 2 & 3 | | | | closed | |---------------------------------------+-------+------------| | External clock mode enabled | JP9 | Pins 1 & 2 | | | | closed | |---------------------------------------+-------+------------| | i Remote digital DTE loopback test | JP14 | Pins 1 & 2 | | disabled | | closed | |---------------------------------------+-------+------------| | Remote digital DTE loopback test | JP14 | Pins 2 & 3 | | enabled | | closed | |---------------------------------------+-------+------------| | i Local analog DTE loopback test | JP15 | Pins 1 & 2 | | disabled | | closed | |---------------------------------------+-------+------------| | Local analog DTE loopback test | JP15 | Pins 2 & 3 | | enabled | | closed | |---------------------------------------+-------+------------| | i Signal ground is connected to the | JP18 | Pins 2 & 3 | | frame ground | | closed | |---------------------------------------+-------+------------| | Signal ground is not connected to the | JP18 | Pins 1 & 2 | | frame ground | | closed | |---------------------------------------+-------+------------| | i Synchronous operation mode enabled | SW6/1 | On | |---------------------------------------+-------+------------| | Asynchronous operation mode enabled | SW6/1 | Off | |---------------------------------------+-------+------------| | i 8-bit | SW6/2 | On | |---------------------------------------+-------+------------| | 7-bit | SW6/2 | Off | |---------------------------------------+-------+------------| | i Parity enable | SW6/3 | On | |---------------------------------------+-------+------------| | Parity disabled | SW6/3 | Off | |---------------------------------------+-------+------------| | i Parity even | SW6/4 | On | |---------------------------------------+-------+------------| | Parity odd | SW6/4 | Off | |---------------------------------------+-------+------------| | i 1 stop bit | SW6/5 | On | |---------------------------------------+-------+------------| | 2 stop bits | SW6/5 | Off | |---------------------------------------+-------+------------| | i DCD mode enabled | SW6/6 | On | |---------------------------------------+-------+------------| | CNT mode enabled | SW6/6 | Off | |---------------------------------------+-------+------------| | i DSR mode enabled | SW6/7 | On | |---------------------------------------+-------+------------| | DTR mode enabled | SW6/7 | Off | +------------------------------------------------------------+ +------------------------------------------------------------+ | DATA RATE | |------------------------------------------------------------| | Setting | Mode | SW7 | |------------------------------------------------------------| | 1200bps | Sync/async | 1 | |------------------------------------------------------------| | 2400bps | Sync/async | 2 | |---------------------------+-------------------+------------| | 4800bps | Sync/async | 3 | |---------------------------+-------------------+------------| | 9600bps | Sync/async | 4 | |---------------------------+-------------------+------------| | 19.2Kbps | Sync/async | 5 | |---------------------------+-------------------+------------| | 38.4Kbps | Sync/async | 6 | |---------------------------+-------------------+------------| | 48.0Kbps | Sync | 7 | |---------------------------+-------------------+------------| | i 64.0Kbps | Sync | 9 | |---------------------------+-------------------+------------| | 128.0Kbps | Sync | A | |---------------------------+-------------------+------------| | 57.6Kbps | Async | C | |---------------------------+-------------------+------------| | 115.2Kbps | Async | D | |---------------------------+-------------------+------------| | 16Kbps | Unidentified | E | |---------------------------+-------------------+------------| | 32Kbps | Unidentified | F | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |------+--------+----------+---------------------------------| | PWR | Green | On | Power is on | |------+--------+----------+---------------------------------| | PWR | Green | Off | Power is off | |------+--------+----------+---------------------------------| | TD | Yellow | On | Device is transmitting a steady | | | | | space | |------+--------+----------+---------------------------------| | TD | Yellow | Blinking | Device is transmitting data | |------+--------+----------+---------------------------------| | TD | Yellow | Off | Device is not transmitting data | |------+--------+----------+---------------------------------| | RD | Yellow | On | Device is receiving a steady | | | | | space | |------+--------+----------+---------------------------------| | RD | Yellow | Blinking | Device is receiving pulses from | | | | | network | |------+--------+----------+---------------------------------| | RD | Yellow | Off | Device is not receiving pulses | | | | | from network | |------+--------+----------+---------------------------------| | RTS | Yellow | On | RTS signal is high | |------+--------+----------+---------------------------------| | RTS | Yellow | Off | RTS signal is low | |------+--------+----------+---------------------------------| | DCD | Yellow | On | DCD signal is high | |------+--------+----------+---------------------------------| | DCD | Yellow | Off | DCD signal is low | |------+--------+----------+---------------------------------| | LOS | Red | On | Loss of synchronization | |------+--------+----------+---------------------------------| | LOS | Red | Blinking | Synchronization not established | |------+--------+----------+---------------------------------| | LOS | Red | Off | Synchronization OK | |------+--------+----------+---------------------------------| | ERR | Red | On | Error detected on received | | | | | configuration information | |------+--------+----------+---------------------------------| | ERR | Red | Off | Error not detected on received | | | | | configuration information | |------+--------+----------+---------------------------------| | TST | Red | On | Device is conducting a loopback | | | | | test | |------+--------+----------+---------------------------------| | TST | Red | Off | Device is not conducting a | | | | | loopback test | +------------------------------------------------------------+