ZYXEL COMMUNICATIONS CORPORATION ================================ U-1496E/U-1496E+ Modem Type Data (synchronous/asynchronous)/Fax/Voice Maximum Data Rate 19.2Kbps Maximum Fax Rate 14.4Kbps Data Bus External Fax Class Class I & II Data Modulation Bell 103A/212A Protocol CCITT V.21, V.22, V.22bis, V.23, V.26bis, V.27bis, V.29, V.32, V.32bis, V.33 ZyXEL 16.8Kbps, 19.2Kbps, ZyCELL 4800bps-19.2Kbps cellular Fax Modulation ITU-T V.17, V.21CH2, V.27ter, V.29 Protocol Error MNP2-5, V.42, V.42bis Correction/Compression +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Purpose | Location | Purpose | Location | |------------------+----------+-------------------+----------| | Line out | CN1 | DC power | CN3 | |------------------+----------+-------------------+----------| | Line in | CN2 | RS-232/422 | CN4 | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |-----+-------+----------+-----------------------------------| | HS | Red | On | Modem is in 9600bps or faster | | | | | mode. | |-----+-------+----------+-----------------------------------| | HS | Red | Off | Modem is in slower than 9600bps | | | | | mode. | |-----+-------+----------+-----------------------------------| | HS | Red | Blinking | Modem is retraining speed. | |-----+-------+----------+-----------------------------------| | AA | Red | On | Auto-answer enabled | |-----+-------+----------+-----------------------------------| | AA | Red | Off | Auto-answer disabled | |-----+-------+----------+-----------------------------------| | AA | Red | Blinking | Line is ringing | |-----+-------+----------+-----------------------------------| | CD | Red | On | Carrier signal has been detected. | |-----+-------+----------+-----------------------------------| | CD | Red | Off | Carrier signal has not been | | | | | detected. | |-----+-------+----------+-----------------------------------| | OH | Red | On | Modem is off-hook | |-----+-------+----------+-----------------------------------| | OH | Red | Off | Modem is on-hook | |-----+-------+----------+-----------------------------------| | DTR | Red | On | DTR signal is high | |-----+-------+----------+-----------------------------------| | DTR | Red | Off | DTR signal is low | |-----+-------+----------+-----------------------------------| | DSR | Red | On | DSR signal is high | |-----+-------+----------+-----------------------------------| | DSR | Red | Off | DSR signal is low | |-----+-------+----------+-----------------------------------| | CTS | Red | On | CTS signal is high | |-----+-------+----------+-----------------------------------| | CTS | Red | Off | CTS signal is low | |-----+-------+----------+-----------------------------------| | TXD | Red | On | Modem is transmitting data | |-----+-------+----------+-----------------------------------| | TXD | Red | Off | Modem is not transmitting data | |-----+-------+----------+-----------------------------------| | RXD | Red | On | Modem is receiving data | |-----+-------+----------+-----------------------------------| | RXD | Red | Off | Modem is not receiving data | |-----+-------+----------+-----------------------------------| | EC | Red | On | Modem is in error-correcting | | | | | mode. | |-----+-------+----------+-----------------------------------| | EC | Red | Off | Modem is not in error-correcting | | | | | mode. | |-----+-------+----------+-----------------------------------| | SQ | Red | On | Signal quality is good. | |-----+-------+----------+-----------------------------------| | SQ | Red | Off | Signal quality is poor; at | | | | | power-up, indicates an error. | |-----+-------+----------+-----------------------------------| | TST | Red | On | Modem is in test mode. | |-----+-------+----------+-----------------------------------| | TST | Red | Off | Modem is not in test mode. | +------------------------------------------------------------+ Proprietary Command Set See document V1036 for a full command summary.