VEN-TEL, INC. ============= CS2001 Modem Type Data (synchronous/asynchronous)/Fax/Voice Maximum Data Rate 28.8Kbps Maximum Fax Rate 14.4Kbps Data Bus External Fax Class Class I & II Data Modulation Bell 103A/212A Protocol ITU-T V.21, V.22, V.22bis, V.32, V.32bis AT&T V.32terbo Fax Modulation V.17, ITU-T V.21CH2, V.27ter, V.29 Protocol Error MNP5, V.42, V.42bis Correction/Compression +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Purpose | Location | Purpose | Location | |-----------------+----------+--------------------+----------| | Line out | CN1 | Stored profile | SW2 | |-----------------+----------+--------------------+----------| | Line in | CN2 | Voice mode | SW3 | |-----------------+----------+--------------------+----------| | DC power | CN3 | AD/DC | SW4 | |-----------------+----------+--------------------+----------| | RS-232/422 | CN4 | Power switch | SW5 | |-----------------+----------+--------------------+----------| | Volume | SW1 | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | STORED PROFILE | |------------------------------------------------------------| | Function | SW2 | |-------------------------------------------+----------------| | Signal to display active profile | Press | |-------------------------------------------+----------------| | Signal to display menu of stored profiles | Press twice | |------------------------------------------------------------| | Note: Function is software dependent. | +------------------------------------------------------------+ +------------------------------------------------------------+ | Voice | |------------------------------------------------------------| | Function | Mode | SW3 | |-------------------------------------+--------------+-------| | Dial stored number, speakerphone on | Off line | Press | |-------------------------------------+--------------+-------| | Microphone disable | Speakerphone | Press | +------------------------------------------------------------+ +------------------------------------------------------------+ | AD/DC | |------------------------------------------------------------| | Function | Mode | SW4 | |--------------------+--------------------+------------------| | Dial stored number | Off line | Press | |--------------------+--------------------+------------------| | Disconnect | On line | Press | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |--------+-------+----------+--------------------------------| | DTR | Red | On | DTR high | |--------+-------+----------+--------------------------------| | DTR | Red | Off | DTR normal | |--------+-------+----------+--------------------------------| | OH | Red | On | Modem is off-hook | |--------+-------+----------+--------------------------------| | OH | Red | Off | Modem is on-hook | |--------+-------+----------+--------------------------------| | OH | Green | On | Speakerphone on | |--------+-------+----------+--------------------------------| | OH | Green | Blinking | Speakerphone on, microphone | | | | | muted | |--------+-------+----------+--------------------------------| | CD | Red | On | Carrier signal detected | |--------+-------+----------+--------------------------------| | CD | Red | Off | Carrier signal not detected | |--------+-------+----------+--------------------------------| | PWR/RI | Red | On | Power on | |--------+-------+----------+--------------------------------| | PWR/RI | Red | Off | Power off | |--------+-------+----------+--------------------------------| | PWR/RI | Red | Blinking | Ring detected | |--------+-------+----------+--------------------------------| | RD | Red | On | Modem is receiving data | |--------+-------+----------+--------------------------------| | RD | Red | Off | Modem is not receiving data | |--------+-------+----------+--------------------------------| | SD | Red | On | Modem is transmitting data | |--------+-------+----------+--------------------------------| | SD | Red | Off | Modem is not transmitting data | +------------------------------------------------------------+ Proprietary AT Command Set +------------------------------------------------------------+ | ROAD KEY CUSTOMIZE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] *A^x^x^x^x [cmds] | |--------------+---------------------------------------------| | Example: | AT *A^M^H^I^I &W | |--------------+---------------------------------------------| | Description: | Sets the key for Remote Options Access and | | | Downloading (^ indicates ctrl key | | | depressed). The default is ^R^O^A^D. | +------------------------------------------------------------+ +------------------------------------------------------------+ | RING TO SPEAKER | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] &Jn [cmds] | |--------------+---------------------------------------------| | Example: | AT &J0 *U O | |--------------+---------------------------------------------| | Description: | Plays ring signal through speaker | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | &J0 | Enabled | |--------------+---------------------------------------------| |>> &J1 | Disabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | ROAD KEY ENABLE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] *Bn [cmds] | |--------------+---------------------------------------------| | Example: | AT *B0 *U O | |--------------+---------------------------------------------| | Description: | Enables Remote Options Access and | | | Downloading. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| |>> *B0 | R.O.A.D. disabled. | |--------------+---------------------------------------------| | *B1 | R.O.A.D. enabled. | +------------------------------------------------------------+ +------------------------------------------------------------+ | COMPRESSION | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT %Cn | |--------------+---------------------------------------------| | Example: | AT %C0 *Y1 | |--------------+---------------------------------------------| | Description: | Selects data compression. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| |>> %C3 | Data compression and correction enabled. | |--------------+---------------------------------------------| | %C0 | Data compression disabled. | |--------------+---------------------------------------------| | %C1 | Data compression enabled. | |--------------+---------------------------------------------| | %C2 | Data correction enabled. | +------------------------------------------------------------+ +------------------------------------------------------------+ | ID DISPLAY | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] In [cmds] | |--------------+---------------------------------------------| | Example: | AT I1 &W | |--------------+---------------------------------------------| | Description: | Displays modem properties. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | I0 | Display product code. | |--------------+---------------------------------------------| | I1 | Display checksum. | |--------------+---------------------------------------------| | I2 | Display checksum check. | |--------------+---------------------------------------------| | I3 | Display version number. | +------------------------------------------------------------+ +------------------------------------------------------------+ | MNP10 COMPRESSION | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] -Kn [cmds] | |--------------+---------------------------------------------| | Example: | AT %C1 -K1 -Q0 | |--------------+---------------------------------------------| | Description: | Selects MNP10 data compression. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| |>> -K0 | MNP10 disabled. | |--------------+---------------------------------------------| | -K1 | MNP10 enabled. | |--------------+---------------------------------------------| | -K2 | MNP10 enabled on originate mode only. | +------------------------------------------------------------+ +------------------------------------------------------------+ | CELLULAR PHONE POWER LEVEL | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] )Mn [cmds] | |--------------+---------------------------------------------| | Example: | AT )M1 %C1 | |--------------+---------------------------------------------| | Description: | Controls automatic transmit power level | | | adjustment during MNP 10 link negotiation. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| |>> )M0 | Power level adjustment disabled. | |--------------+---------------------------------------------| | )M1 | Power level adjustment enabled. | +------------------------------------------------------------+ +------------------------------------------------------------+ | MNP10 FALL-BACK | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] -Qn [cmds] | |--------------+---------------------------------------------| | Example: | AT *H0 -Q1 | |--------------+---------------------------------------------| | Description: | Allows MNP10 to fall back to speeds slower | | | than 4800bps. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | -Q0 | MNP10 at 2400 and 1200bps disabled. | |--------------+---------------------------------------------| |>> -Q1 | MNP10 at 2400 and 1200bps enabled. | +------------------------------------------------------------+ +------------------------------------------------------------+ | ROAD INITIATE | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] *U [cmds] | |--------------+---------------------------------------------| | Example: | AT *B0 *U O | |--------------+---------------------------------------------| | Description: | Commands the modem to transmit stored | | | Remote Access Options and Downloading key. | | | The modem must have already connected. | +------------------------------------------------------------+