TEXT View Source
# ACCULOGIC, INC.
SIDE-4/ PLUS
+------------------------------------------------------------+
|------------------------------------------------------------|
| Data bus: | 16-bit, ISA |
|-------------------+----------------------------------------|
| Size: | Half-length, full-height card |
|-------------------+----------------------------------------|
| Hard drives | Two IDE(AT) drives |
| supported: | |
|-------------------+----------------------------------------|
| Floppy drives | Two 360KB, 720KB, 1.2MB or 1.44MB |
| supported: | drives |
+------------------------------------------------------------+
IMG IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location |
|---------------------------------------------+--------------|
| 34-pin control cable connector-floppy drive | J1 |
|---------------------------------------------+--------------|
| 4-pin connector-drive active LED | J2 |
|---------------------------------------------+--------------|
| 40-pin AT Interface (IDE) connector | J3 |
|---------------------------------------------+--------------|
| 9-pin serial port 2-internal | J4 |
|---------------------------------------------+--------------|
| 15-pin game port-internal | J5 |
|---------------------------------------------+--------------|
| 9-pin serial port 1-external | J6 |
|---------------------------------------------+--------------|
| 25-pin parallel port-external | J7 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Location | Setting |
|------------------------------------+----------+------------|
| » | I/O Channel Ready signal | JP4 | open |
| | disabled | | |
|---+--------------------------------+----------+------------|
| | I/O Channel Ready signal | JP4 | closed |
| | enabled | | |
|---+--------------------------------+----------+------------|
| » | Floppy drive enabled | JP5 | pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Floppy drive disabled | JP5 | pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Floppy drive port address is | JP6 | pins 1 & 2 |
| | 3F0-3F7h | | closed |
|---+--------------------------------+----------+------------|
| | Floppy drive port address is | JP6 | pins 2 & 3 |
| | 370-377h | | closed |
|---+--------------------------------+----------+------------|
| » | Single speed floppy drives | JP7 | pins 1 & 2 |
| | supported | | closed |
|---+--------------------------------+----------+------------|
| | Dual speed floppy drives | JP7 | pins 2 & 3 |
| | supported | | closed |
|---+--------------------------------+----------+------------|
| » | Hard drive enabled | JP8 | pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Hard drive disabled | JP8 | pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | IDE select mode enabled | JP9 | pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Not used | JP9 | open |
|---+--------------------------------+----------+------------|
| » | Hard drive port address is | JP10 | pins 1 & 2 |
| | 1F0-1F7h | | closed |
|---+--------------------------------+----------+------------|
| | Hard drive port address is | JP10 | pins 2 & 3 |
| | 170-177h | | closed |
|---+--------------------------------+----------+------------|
| » | Not used | JP11 | open |
|---+--------------------------------+----------+------------|
| » | IRQ14 normal | JP12 | pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | IRQ14 delayed until ACTIVE- | JP12 | pins 2 & 3 |
| | signal is removed | | closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SERIAL & PARALLEL PORT CONFIGURATIONS |
|------------------------------------------------------------|
| Function | Location | Setting |
|------------------------------------+----------+------------|
| » | Serial port 1 (CN6) enabled | JP13 | pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Serial port 1 (CN6) disabled | JP13 | pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Serial port 1 (CN6) set to | JP14 | pins 1 & 2 |
| | COM1 | | closed |
|---+--------------------------------+----------+------------|
| | Serial port 1 (CN6) set to | JP14 | pins 2 & 3 |
| | COM3 | | closed |
|---+--------------------------------+----------+------------|
| » | Serial port 2 (CN4) enabled | JP15 | pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Serial port 2 (CN4) disabled | JP15 | pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Serial port 2 (CN4) set to | JP16 | pins 1 & 2 |
| | COM2 | | closed |
|---+--------------------------------+----------+------------|
| | Serial port 2 (CN4) set to | JP16 | pins 2 & 3 |
| | COM4 | | closed |
|---+--------------------------------+----------+------------|
| » | Parallel port (CN7) enabled | JP17 | pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Parallel port (CN7) disabled | JP17 | pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Parallel port (CN7) address is | JP18 | pins 1 & 2 |
| | LPT1 | | closed |
|---+--------------------------------+----------+------------|
| | Parallel port (CN7) address is | JP18 | pins 2 & 3 |
| | LPT2 | | closed |
+------------------------------------------------------------+