TEXT View Source
# ADVANCED DIGITAL INFORMATION CORPORATION
BUSMASTER FAST-SCSI DCB-EISA
Data bus: 32-bit, EISA
Size: Full-length, full-height card
Hard drive Up to seven SCSI devices
supported:
Floppy drives Two 360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB
supported: drives
IMG IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location |
|-----------------------------------------------+------------|
| 4-pin-connector - drive active LED | J1 |
|-----------------------------------------------+------------|
| 34-pin control cable connector - floppy drive | J2 |
|-----------------------------------------------+------------|
| 50-pin SCSI connector - internal | J3 |
|-----------------------------------------------+------------|
| 50-pin SCSI connector - external | J4 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Location | Setting |
|--------------------------------+-------------+-------------|
| ยป | Floppy drive enabled | W8 | closed |
|---+----------------------------+-------------+-------------|
| | Floppy drive disabled | W8 | open |
|---+----------------------------+-------------+-------------|
| | Floppy drive enabled | J3 | pins 41 & |
| | | | 42 closed |
|---+----------------------------+-------------+-------------|
| | Floppy drive disabled | J3 | pins 41 & |
| | | | 42 open |
|---+--------------------------------------------------------|
| | Note (1):The floppy drive controller can be enabled |
| | any one of three ways: |
| | |
| | (a) close jumper W8, or |
| | |
| | (b) close pins 41 & 42 of connector J3, or |
| | |
| | (c) select the floppy disk controller enabled option |
| | in the EISA configuration file. |
| | |
| | Note (2):To disable the floppy disk controller, all |
| | three of the above options must be disabled: |
| | |
| | (a) open jumper W8, and |
| | |
| | (b) open pins 41 & 42 of connector J3, and |
| | |
| | (c) select the floppy disk controller disabled option |
| | in the EISA configuration file. |
+------------------------------------------------------------+