TEXT View Source
# BOCA RESEARCH, INC.
IDE200
+------------------------------------------------------------+
|------------------------------------------------------------|
| Data bus: | 16-bit ISA |
|---------------+--------------------------------------------|
| Size: | Half-length, half-height card |
|---------------+--------------------------------------------|
| Hard drive | Two IDE(AT) drives |
| supported: | |
|---------------+--------------------------------------------|
| Floppy drives | Two 360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB |
| supported: | drives |
+------------------------------------------------------------+
IMG IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location |
|-------------------------------------------------+----------|
| 40-pin primary IDE(AT) connector | J1 |
|-------------------------------------------------+----------|
| 34-pin cable connector - floppy drive | J2 |
|-------------------------------------------------+----------|
| 10-pin serial port 2 - internal | J3 |
|-------------------------------------------------+----------|
| 9-pin serial port 1 - external, 10-pin serial | J4 |
| port 1 internal | |
|-------------------------------------------------+----------|
| 4-pin connector - drive active LED | J5 |
|-------------------------------------------------+----------|
| 25-pin parallel port - external | J9 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Location | Setting |
|------------------------------------+----------+------------|
| » | IDE(AT) interface is primary | J6A | Pins 4 & 5 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | IDE(AT) interface is secondary | J6A | Pins 5 & 6 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Parallel port IRQ7 select | J6B | Pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Parallel port IRQ5 select | J6B | Pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | IDE(AT) IRQ 14 select | J6B | Pins 4 & 5 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | IDE(AT) IRQ 15 select | J6B | Pins 5 & 6 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Serial port 1 IRQ4 select | J6C | Pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Serial port 1 IRQ7 select | J6C | Pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Serial port 2 IRQ3 select | J6C | Pins 4 & 5 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Serial port 2 IRQ5 select | J6C | Pins 5 & 6 |
| | | | closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS (CONTINUED) |
|------------------------------------------------------------|
| Function | Location | Setting |
|------------------------------------+----------+------------|
| » | Serial port 1 enabled | J8A | Pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Serial port 1 disabled | J8A | Pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Serial port 2 enabled | J8A | Pins 4 & 5 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Serial port 2 disabled | J8A | Pins 5 & 6 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Serial port 1 is COM1 | J8B | Pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Serial port 1 is COM3 | J8B | Pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Serial port 2 is COM2 | J8B | Pins 4 & 5 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Serial port 2 is COM4 | J8B | Pins 5 & 6 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Parallel port interface | J8C | Pins 1 & 2 |
| | enabled | | closed |
|---+--------------------------------+----------+------------|
| | Parallel port interface | J8C | Pins 2 & 3 |
| | disabled | | closed |
|---+--------------------------------+----------+------------|
| » | IDE(AT) interface enabled | J8C | Pins 4 & 5 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | IDE(AT) interface disabled | J8C | Pins 5 & 6 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Parallel port address is 378h | J8D | Pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Parallel port address is 278h | J8D | Pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Floppy drive interface enabled | J8D | Pins 4 & 5 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Floppy drive interface | J8D | Pins 5 & 6 |
| | disabled | | closed |
+------------------------------------------------------------+