TEXT View Source
# GOLDSTAR ELECTRONICS INTERNATIONAL, INC.
PRIME 2 IDE I/O CARD
+------------------------------------------------------------+
|------------------------------------------------------------|
| Data bus: | 16-bit, ISA |
|-------------------+----------------------------------------|
| Size: | Half-length, full-height card |
|-------------------+----------------------------------------|
| Hard drive | Two IDE(AT) Interface drives |
| supported: | |
|-------------------+----------------------------------------|
| Floppy drives | Two 360KB, 720KB, 1.2MB, or 1.44MB |
| supported: | drives |
+------------------------------------------------------------+
IMG IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location |
|------------------------------------------------+-----------|
| 9-pin serial port 1 (COM1/3) - external | CN1 |
|------------------------------------------------+-----------|
| 10-pin serial port 2 (COM2/4) - internal | CN2 |
|------------------------------------------------+-----------|
| 25-pin parallel port (LPT1/2) - external | CN3 |
|------------------------------------------------+-----------|
| 34-pin control cable connection - floppy drive | CN4 |
|------------------------------------------------+-----------|
| 40-pin IDE(AT) Interface connector | CN5 |
|------------------------------------------------+-----------|
| 15-pin game port - internal | CN6 |
|------------------------------------------------+-----------|
| 2-pin connector - Drive Active LED | J13 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Location | Setting |
|------------------------------------+----------+------------|
| » | Floppy drive enabled | J1 | pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Floppy drive disabled | J1 | pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Floppy drive port address is | J2 | pins 1 & 2 |
| | 3F0-3F7h | | closed |
|---+--------------------------------+----------+------------|
| | Floppy drive port address is | J2 | pins 2 & 3 |
| | 370-377h | | closed |
|---+--------------------------------+----------+------------|
| » | Hard drive enabled | J3 | pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Hard drive disabled | J3 | pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | AT Hard drive port address is | J4 | pins 1 & 2 |
| | 1F0-1F7 & 3F6-3F7h | | closed |
|---+--------------------------------+----------+------------|
| | AT Hard drive port address is | J4 | pins 2 & 3 |
| | 170-177 & 376-377h | | closed |
|---+--------------------------------+----------+------------|
| » | XT hard drive port address is | J5 | pins 1 & 2 |
| | 320-323h | | closed |
|---+--------------------------------+----------+------------|
| | XT Hard drive port address is | J5 | pins 2 & 3 |
| | 324-327h | | closed |
|---+--------------------------------+----------+------------|
| » | IDE(AT) drives supported | J6 | pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | IDE(XT) drives supported | J6 | pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Serial port 1 enabled | J7 | pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Serial port 1 disabled | J7 | pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Serial port 1 set to COM1 and | J8 | pins 1 & 2 |
| | IRQ4 | | closed |
|---+--------------------------------+----------+------------|
| | Serial port 1 set to COM3 and | J8 | pins 2 & 3 |
| | IRQ4 | | closed |
|---+--------------------------------+----------+------------|
| » | Serial port 2 enabled | J9 | pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Serial port 2 disabled | J9 | pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Serial port 2 set to COM2 and | J10 | pins 1 & 2 |
| | IRQ3 | | closed |
|---+--------------------------------+----------+------------|
| | Serial port 2 set to COM3 and | J10 | pins 2 & 3 |
| | IRQ3 | | closed |
|---+--------------------------------+----------+------------|
| » | Parallel port enabled | J11 | pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Parallel port disabled | J11 | pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Parallel port set to LPT1 and | J12 | pins 1 & 2 |
| | IRQ7 | | closed |
|---+--------------------------------+----------+------------|
| | Parallel port set to LPT2 and | J12 | pins 2 & 3 |
| | IRQ7 | | closed |
+------------------------------------------------------------+