TEXT View Source
# KOUWELL ELECTRONICS CORPORATION
KW-801
Data Bus 32-bit PCI
Card Size Half-height, half-length card
Hard Drives supported Up to 7 SCSI-2 devices
Floppy drives supported None
IMG IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location | Function | Location |
|-------------+----------+------------------------+----------|
| 50-pin SCSI | J1 | 2-pin connector - | J4 |
| connector - | | drive active LED | |
| internal | | | |
|-------------+----------+------------------------+----------|
| 50-pin SCSI | J2 | | |
| connector - | | | |
| external | | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Label | Position |
|--------------------------------------+--------+------------|
| » | Active termination enabled | JP1 | Closed |
|-----+--------------------------------+--------+------------|
| | Active termination disabled | JP1 | Open |
|------------------------------------------------------------|
| Note: When BOTH external AND internal devices exist, |
| disable on-board termination jumper JP1 and insert |
| the resister array RP1-RP3. This setting is used if |
| controller lies within the device chain. When only |
| external devices OR only internal devices exist, |
| enable JP1 and remove resister arry RP1-RP3. This |
| setting is used when controller is at one end of |
| device chain. (Location of resistors RP1-RP3 is |
| unidentified.) |
+------------------------------------------------------------+
+------------------------------------------------------------+
| PCI INTERRUPT SELECTION |
|------------------------------------------------------------|
| Setting | JP2 | JP3 |
|------------------+--------------------+--------------------|
| » | INTA | Pins 2 & 3 closed | Open |
|---+--------------+--------------------+--------------------|
| | INTB | Pins 1 & 2 closed | Open |
|---+--------------+--------------------+--------------------|
| | INTC | Open | Pins 2 & 3 closed |
|---+--------------+--------------------+--------------------|
| | INTD | Open | Pins 1 & 2 closed |
+------------------------------------------------------------+