TEXT View Source
# MYLEX CORPORATION
DAC960E
Data bus: 32-bit EISA
Size: Three-quarter length, full-height card
Hard drive supported: Up to twenty-one Fast SCSI-2 devices
Floppy drives None
supported:
IMG IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location |
|-------------------------------------------+----------------|
| 50-pin SCSI channel 2 connector - | J2 |
| internal | |
|-------------------------------------------+----------------|
| 50-pin SCSI channel 1 connector - | J3 |
| internal | |
|-------------------------------------------+----------------|
| 50-pin SCSI channel 0 connector - | J4 |
| internal | |
|-------------------------------------------+----------------|
| 50-pin SCSI channel 0 connector - | J6 |
| external | |
|-------------------------------------------+----------------|
| 2-pin connector - SCSI active LED | JP1/pins 1 & 2 |
|-------------------------------------------+----------------|
| 2-pin connector - EISA active LED | JP1/pins 3 & 4 |
|-------------------------------------------+----------------|
| 2-pin connector - write pending LED | JP1/pins 5 & 6 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Location | Setting |
|-----------------------------------+------------+-----------|
| » | Factory configured - do not | JP2 | N/A |
| | alter | | |
|----+------------------------------+------------+-----------|
| » | Termination power enabled | JP3 | Closed |
| | for SCSI channel 2 | | |
|----+------------------------------+------------+-----------|
| | Termination power disabled | JP3 | Open |
| | for SCSI channel 2 | | |
|----+------------------------------+------------+-----------|
| » | Termination power enabled | JP4 | Closed |
| | for SCSI channel 1 | | |
|----+------------------------------+------------+-----------|
| | Termination power disabled | JP4 | Open |
| | for SCSI channel 1 | | |
|----+------------------------------+------------+-----------|
| » | Termination power enabled | JP5 | Closed |
| | for SCSI channel 0 | | |
|----+------------------------------+------------+-----------|
| | Termination power disabled | JP5 | Open |
| | for SCSI channel 0 | | |
|------------------------------------------------------------|
| Note: Enable termination power when the controller is |
| installed at one end of a channel and disable termination |
| power when a channel is not at the end of SCSI cable. When |
| both connectors J4 and J6 use channel 0, disable |
| termination to that channel. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DRAM CONFIGURATION |
|------------------------------------------------------------|
| Size | Bank 0 |
|---------------------+--------------------------------------|
| 2MB | (1) 512 x 36 |
|---------------------+--------------------------------------|
| 4MB | (1) 1M x 36 |
|---------------------+--------------------------------------|
| 8MB | (1) 2M x 36 |
|---------------------+--------------------------------------|
| 16MB | (1) 4M x 36 |
|---------------------+--------------------------------------|
| 32MB | (1) 8M x 36 |
+------------------------------------------------------------+