TEXT View Source
# PROMISE TECHNOLOGY, INC.
DC4030VL
+------------------------------------------------------------+
|------------------------------------------------------------|
| Data bus: | 32-bit, VL-bus |
|---------------+--------------------------------------------|
| Size: | Three/quarter-length, full-height card |
|---------------+--------------------------------------------|
| Hard drive | Four IDE (AT) Interface drives |
| supported: | |
|---------------+--------------------------------------------|
| Floppy drives | Four 360KB, 720KB, 1.2MB, 1.44MB, or |
| supported: | 2.88MB drives |
+------------------------------------------------------------+
IMG IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location |
|-------------------------------------------------+----------|
| 34-pin control cable connector - floppy drive | J1 |
| BUS-0 | |
|-------------------------------------------------+----------|
| 34-pin control cable connector - floppy drive | J2 |
| BUS-1 | |
|-------------------------------------------------+----------|
| 40-pin IDE (AT) Interface connector IDE-0 | J3 |
|-------------------------------------------------+----------|
| 40-pin IDE (AT) Interface connector IDE-1 | J4 |
|-------------------------------------------------+----------|
| 4-pin connector - drive active LED | JP1 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Location | Setting |
|---------------------------------+-------------+------------|
| » | Floppy drive enabled | JP2 | Closed |
|-----+---------------------------+-------------+------------|
| | Floppy drive disabled | JP2 | Open |
|-----+---------------------------+-------------+------------|
| » | VL-bus ID3 signal support | JP4 | Closed |
| | enabled* | | |
|-----+---------------------------+-------------+------------|
| | VL-bus ID3 signal support | JP4 | Open |
| | disabled* | | |
|------------------------------------------------------------|
| *Note: Open JP4 if your motherboard is 50MHz 486 and does |
| not support ID3 signal. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| MISCELLANEOUS TECHNICAL NOTES |
|------------------------------------------------------------|
| At least one pair SIMM of memory modules (256KB, 1MB, or |
| 4MB) of the same size must be installed in Bank 0 in order |
| for the controller to function. |
+------------------------------------------------------------+