TEXT View Source
# RELIALOGIC CORPORATION PRIVATE, LTD.
CA8972F
+------------------------------------------------------------+
|------------------------------------------------------------|
| Data bus: | 32-bit, VL-Bus |
|-------------------+----------------------------------------|
| Size: | Three quarter-length, half-height card |
|-------------------+----------------------------------------|
| Hard drive | Two IDE (AT) interface drives |
| supported: | |
|-------------------+----------------------------------------|
| Floppy drives | 360KB, 720KB, 1.2MB, or 1.44MB drives |
| supported: | |
+------------------------------------------------------------+
IMG IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location |
|-----------------------------------------------+------------|
| 40-pin primary IDE(AT) interface | CN1 |
|-----------------------------------------------+------------|
| 40-pin secondary IDE(AT) interface | CN2 |
|-----------------------------------------------+------------|
| 34-pin control cable connector - floppy drive | CN3 |
|-----------------------------------------------+------------|
| 16-pin Game port | CN4 |
|-----------------------------------------------+------------|
| 10-pin serial port 1 - internal | CN5 |
|-----------------------------------------------+------------|
| 10-pin serial port 2 - internal | CN6 |
|-----------------------------------------------+------------|
| 25-pin parallel port | CN7 |
|-----------------------------------------------+------------|
| 9-pin serial port 1 - external | CN8 |
|-----------------------------------------------+------------|
| 2-pin drive active LED for primary IDE | JP1 |
|-----------------------------------------------+------------|
| 2-pin drive active LED for secondary IDE | JP2 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| HDD SPEED CONFIGURATION |
|------------------------------------------------------------|
| Speed | JP3 | JP4 |
|-------------+-----------------------+----------------------|
| 0 | pins 2 & 3 closed | pins 2 & 3 closed |
|-------------+-----------------------+----------------------|
| 1 | pins 1 & 2 closed | pins 1 & 2 closed |
|-------------+-----------------------+----------------------|
| 2 | pins 2 & 3 closed | pins 1 & 2 closed |
|-------------+-----------------------+----------------------|
| 3 | pins 1 & 2 closed | pins 2 & 3 closed |
|------------------------------------------------------------|
| Note: Speed "0" is the lowest, speed "3" is the highest. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Location | Setting |
|---------------------------------+------------+-------------|
| » | Primary IDE interface | JP5 | pins 1 & 2 |
| | enabled | | closed |
|-----+---------------------------+------------+-------------|
| | Primary IDE interface | JP5 | pins 2 & 3 |
| | disabled | | closed |
|-----+---------------------------+------------+-------------|
| » | Secondary IDE interface | JP6 | pins 1 & 2 |
| | enabled | | closed |
|-----+---------------------------+------------+-------------|
| | Secondary IDE interface | JP6 | pins 2 & 3 |
| | disabled | | closed |
|-----+---------------------------+------------+-------------|
| » | Floppy drive interface | JP9 | pins 1 & 2 |
| | enabled | | closed |
|-----+---------------------------+------------+-------------|
| | Floppy drive interface | JP9 | pins 2 & 3 |
| | disabled | | closed |
|-----+---------------------------+------------+-------------|
| » | Parallel port is LPT2 | JP14 | pins 1 & 2 |
| | | | closed |
|-----+---------------------------+------------+-------------|
| | Parallel port is LPT3 | JP14 | pins 2 & 3 |
| | | | closed |
|-----+---------------------------+------------+-------------|
| » | Game port enabled | JP15 | pins 1 & 2 |
| | | | closed |
|-----+---------------------------+------------+-------------|
| | Game port disabled | JP15 | pins 2 & 3 |
| | | | closed |
|-----+---------------------------+------------+-------------|
| » | External floppy drive | JP16 | Pins 1 & 2 |
| | controller enabled | | closed |
|-----+---------------------------+------------+-------------|
| | External floppy drive | JP16 | pins 2 & 3 |
| | controller disabled | | closed |
|------------------------------------------------------------|
| Note: When enabling the external floppy drive |
| controller, an external floppy drive can be attached to |
| the parallel port. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| PARALLEL PORT MODE CONFIGURATION |
|------------------------------------------------------------|
| MODE | JP7 | JP8 |
|----------------------+------------------+------------------|
| » | Standard printer | pins 1 & 2 | pins 2 & 3 |
| | | closed | closed |
|---+------------------+------------------+------------------|
| | ECP | pins 1 & 2 | pins 1 & 2 |
| | | closed | closed |
|---+------------------+------------------+------------------|
| | EPP | pins 2 & 3 | pins 1 & 2 |
| | | closed | closed |
|---+------------------+------------------+------------------|
| | Disabled | pins 2 & 3 | pins 2 & 3 |
| | | closed | closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SERIAL PORT 1 CONFIGURATION |
|------------------------------------------------------------|
| COM | JP10 | JP11 |
|------------------+--------------------+--------------------|
| » | COM1 | pins 1 & 2 closed | pins 1 & 2 closed |
|---+--------------+--------------------+--------------------|
| | COM3 | pins 2 & 3 closed | pins 1 & 2 closed |
|---+--------------+--------------------+--------------------|
| | Disabled | N/A | pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SERIAL PORT 2 CONFIGURATION |
|------------------------------------------------------------|
| COM | JP12 | JP13 |
|------------------+--------------------+--------------------|
| » | COM2 | pins 1 & 2 closed | pins 1 & 2 closed |
|---+--------------+--------------------+--------------------|
| | COM4 | pins 2 & 3 closed | pins 1 & 2 closed |
|---+--------------+--------------------+--------------------|
| | Disabled | N/A | pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DMA SELECTION |
|------------------------------------------------------------|
| DMA | JP17 | JP18 |
|------------------+--------------------+--------------------|
| » | DMA1 | pins 1 & 2 closed | pins 1 & 2 closed |
|---+--------------+--------------------+--------------------|
| | DMA3 | pins 2 & 3 closed | pins 2 & 3 closed |
+------------------------------------------------------------+