TEXT View Source
# PROMISE TECHNOLOGY, INC.
EIDE 4030 PLUS
+------------------------------------------------------------+
|------------------------------------------------------------|
| Data bus: | 32-bit VESA local bus |
|-------------------+----------------------------------------|
| Size: | Three/quarter-length, full-height card |
|-------------------+----------------------------------------|
| Hard drive | Four IDE (AT) Interface drives |
| supported: | |
|-------------------+----------------------------------------|
| Floppy drives | Two 360KB, 720KB, 1.2MB, 1.44MB drives |
| supported: | |
+------------------------------------------------------------+
IMG IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location |
|-----------------------------------------------+------------|
| 40-pin primary VESA IDE(AT) interface | J1 |
| connector | |
|-----------------------------------------------+------------|
| 40-pin secondary VESA IDE(AT) interface | J2 |
| connector | |
|-----------------------------------------------+------------|
| 40-pin ISA ATAPI IDE(AT) interface connector | J3 |
|-----------------------------------------------+------------|
| 34-pin connector - floppy drive interface | J4 |
|-----------------------------------------------+------------|
| 16-pin connector - game port (external) | J5 |
|-----------------------------------------------+------------|
| 9-pin connector - serial port 1 (external) | J6 |
|-----------------------------------------------+------------|
| 10-pin connector - serial port 2 (internal) | J7 |
|-----------------------------------------------+------------|
| 25-pin parallel port (external) | J8 |
|-----------------------------------------------+------------|
| 4-pin connector - drive active LED | JP2 |
|------------------------------------------------------------|
| Note: Connector J3 is used for IDE CD-ROM (ATAPI) and tape |
| drives. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Location | Setting |
|------------------------------------+----------+------------|
| » | VESA IDE is primary channel | JP1 | pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | VESA IDE is secondary channel | JP1 | pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | VESA IDE channel is disabled | JP1 | all open |
|---+--------------------------------+----------+------------|
| » | ISA IDE(AT) interrupt IRQ15 | JP3 | pins 1 & 2 |
| | select | | closed |
|---+--------------------------------+----------+------------|
| | ISA IDE(AT) interrupt IRQ14 | JP3 | pins 2 & 3 |
| | select | | closed |
|---+--------------------------------+----------+------------|
| » | Game port enabled | JP4/A | pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Game port disabled | JP4/A | pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Factory configured - do not | JP4/B | pins 1 & 2 |
| | alter | | closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS (CONTINUED) |
|------------------------------------------------------------|
| Function | Location | Setting |
|------------------------------------+----------+------------|
| » | Floppy drive interface enabled | JP4/C | pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Floppy drive interface | JP4/C | pins 2 & 3 |
| | disabled | | closed |
|---+--------------------------------+----------+------------|
| » | Parallel port interrupt select | JP5/A | pins 1 & 2 |
| | IRQ7 | | closed |
|---+--------------------------------+----------+------------|
| | Parallel port interrupt select | JP5/A | pins 2 & 3 |
| | IRQ5 | | closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| PARALLEL PORT ADDRESS SELECTION |
|------------------------------------------------------------|
| Address | JP5/B | JP5/C |
|--------------------+-------------------+-------------------|
| » | 378h | pins 2 & 3 closed | pins 1 & 2 closed |
|---+----------------+-------------------+-------------------|
| | 278h | pins 1 & 2 closed | pins 1 & 2 closed |
|---+----------------+-------------------+-------------------|
| | 3BCh | pins 1 & 2 closed | pins 2 & 3 closed |
|---+----------------+-------------------+-------------------|
| | Disabled | pins 2 & 3 closed | pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| PRIMARY SERIAL PORT ADDRESS SELECTION |
|------------------------------------------------------------|
| Address | JP5/F | JP5/G |
|--------------------+-------------------+-------------------|
| » | 3F8h (COM1) | pins 1 & 2 closed | pins 1 & 2 closed |
|---+----------------+-------------------+-------------------|
| | 2F8h (COM2) | pins 2 & 3 closed | pins 1 & 2 closed |
|---+----------------+-------------------+-------------------|
| | 3E8h (COM3) | pins 1 & 2 closed | pins 2 & 3 closed |
|---+----------------+-------------------+-------------------|
| | Disabled | pins 2 & 3 closed | pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SECONDARY SERIAL PORT ADDRESS SELECTION |
|------------------------------------------------------------|
| Address | JP5/D | JP5/E |
|--------------------+-------------------+-------------------|
| » | 2F8h (COM2) | pins 1 & 2 closed | pins 1 & 2 closed |
|---+----------------+-------------------+-------------------|
| | 3F8h (COM1) | pins 2 & 3 closed | pins 1 & 2 closed |
|---+----------------+-------------------+-------------------|
| | 2E8h (COM3) | pins 1 & 2 closed | pins 2 & 3 closed |
|---+----------------+-------------------+-------------------|
| | Disabled | pins 2 & 3 closed | pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| ISA IDE CONFIGURATION |
|------------------------------------------------------------|
| Setting | JP4/D | JP4/E |
|----------------------------------+------------+------------|
| » | ISA IDE(AT) interface is | pins 1 & 2 | pins 1 & 2 |
| | secondary interface | closed | closed |
|---+------------------------------+------------+------------|
| | ISA IDE(AT) interface is | pins 1 & 2 | pins 2 & 3 |
| | primary interface | closed | closed |
|---+------------------------------+------------+------------|
| | ISA IDE(AT) interface is | pins 2 & 3 | pins 2 & 3 |
| | disabled | closed | closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DMA CHANNEL CONFIGURATION |
|------------------------------------------------------------|
| DMA | JP6/A | JP6/B |
|--------------------+-------------------+-------------------|
| » | 3 | pins 2 & 3 closed | pins 2 & 3 closed |
|---+----------------+-------------------+-------------------|
| | 1 | pins 1 & 2 closed | pins 1 & 2 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DRAM CONFIGURATION |
|------------------------------------------------------------|
| Size | Bank 0 | Bank 1 |
|--------------+------------------------+--------------------|
| 512KB | (2) 256K x 9 | NONE |
|--------------+------------------------+--------------------|
| 1MB | (2) 256K x 9 | (2) 256K x 9 |
|--------------+------------------------+--------------------|
| 2MB | (2) 1M x 9 | NONE |
|--------------+------------------------+--------------------|
| 4MB | (2) 1M x 9 | (2) 1M x 9 |
|--------------+------------------------+--------------------|
| 8MB | (2) 4M x 9 | NONE |
|--------------+------------------------+--------------------|
| 16MB | (2) 4M x 9 | (2) 4M x 9 |
|------------------------------------------------------------|
| Note: The EIDE 4030 PLUS must have at least 512KB |
| installed in order to function. Optimum operation is |
| achieved using 4 identical SIMM modules. |
+------------------------------------------------------------+