URI: 
  TEXT View Source
       
       # PINE TECHNOLOGY
       
          PT-606G
       
          +------------------------------------------------------------+
          |------------------------------------------------------------|
          | Data bus:         | 16-bit ISA                             |
          |-------------------+----------------------------------------|
          | Size:             | Half-length, full-height card          |
          |-------------------+----------------------------------------|
          | Hard drive        | Two IDE(AT) drives                     |
          | supported:        |                                        |
          |-------------------+----------------------------------------|
          | Floppy drives     | Two 360KB, 720KB, 1.2MB, or 1.44MB     |
          | supported:        | drives                                 |
          +------------------------------------------------------------+
       
   IMG IMG 1
          
       
          +------------------------------------------------------------+
          |                        CONNECTIONS                         |
          |------------------------------------------------------------|
          |                 Function                 |    Location     |
          |------------------------------------------+-----------------|
          | 16-pin game port                         |       CN1       |
          |------------------------------------------+-----------------|
          | 40-pin IDE(AT) connector                 |       CN2       |
          |------------------------------------------+-----------------|
          | 34-pin cable connector - floppy drive    |       CN3       |
          |------------------------------------------+-----------------|
          | 9-pin serial port 1 - external           |       CN4       |
          |------------------------------------------+-----------------|
          | 10-pin serial port 2 - internal          |       CN5       |
          |------------------------------------------+-----------------|
          | 25-pin parallel port - external          |       CN6       |
          |------------------------------------------+-----------------|
          | 2-pin connector - drive active LED       |       JP2       |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                 USER CONFIGURABLE SETTINGS                 |
          |------------------------------------------------------------|
          |              Function              | Location |  Setting   |
          |------------------------------------+----------+------------|
          | » | IDE(AT) interface enabled      |    J6    | pins 2 & 3 |
          |   |                                |          |   closed   |
          |---+--------------------------------+----------+------------|
          |   | IDE(AT) interface disabled     |    J6    | pins 1 & 2 |
          |   |                                |          |   closed   |
          |---+--------------------------------+----------+------------|
          | » | Game port enabled              |    J7    | pins 1 & 2 |
          |   |                                |          |   closed   |
          |---+--------------------------------+----------+------------|
          |   | Game port disabled             |    J7    | pins 2 & 3 |
          |   |                                |          |   closed   |
          |---+--------------------------------+----------+------------|
          | » | Floppy drive interface enabled |    J9    | pins 1 & 2 |
          |   |                                |          |   closed   |
          |---+--------------------------------+----------+------------|
          |   | Floppy drive interface         |    J9    | pins 2 & 3 |
          |   | disabled                       |          |   closed   |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |           USER CONFIGURABLE SETTINGS (CONTINUED)           |
          |------------------------------------------------------------|
          |              Function              | Location |  Setting   |
          |------------------------------------+----------+------------|
          | » | Hard drive is installed        |   J10    | pins 1 & 2 |
          |   |                                |          |   closed   |
          |---+--------------------------------+----------+------------|
          |   | Hard drive is not installed    |   J10    | pins 2 & 3 |
          |   |                                |          |   closed   |
          |---+--------------------------------+----------+------------|
          | » | Secure power source is in use  |   JP3    |   closed   |
          |   | by printer (standard current)  |          |            |
          |---+--------------------------------+----------+------------|
          |   | Low-end power source is in use |   JP3    |    open    |
          |   | by printer (isolate current)   |          |            |
          |------------------------------------------------------------|
          | Note: The size and significance of jumper JP1 is           |
          | unidentified.                                              |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |              PARALLEL PORT ADDRESS SELECTION               |
          |------------------------------------------------------------|
          |       LPT        | Address |        J1        |     J8     |
          |------------------+---------+------------------+------------|
          | » |     LPT1     |  378h   |    pins 1 & 2    | pins 1 & 2 |
          |   |              |         |      closed      |   closed   |
          |---+--------------+---------+------------------+------------|
          |   |     LPT2     |  278h   |    pins 1 & 2    | pins 2 & 3 |
          |   |              |         |      closed      |   closed   |
          |---+--------------+---------+------------------+------------|
          |   | Disable LPT1 |   N/A   |    pins 2 & 3    | pins 1 & 2 |
          |   |              |         |      closed      |   closed   |
          |---+--------------+---------+------------------+------------|
          |   | Disable LPT2 |   N/A   |    pins 2 & 3    | pins 2 & 3 |
          |   |              |         |      closed      |   closed   |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |               SERIAL PORT ADDRESS SELECTION                |
          |------------------------------------------------------------|
          | Port 1 (CN4) |  Port 2   |   J2   |   J3   |  J4   |  J5   |
          |              |   (CN5)   |        |        |       |       |
          |--------------+-----------+--------+--------+-------+-------|
          | » |   COM1   |   COM2    | pins 1 | pins 1 | pins  | pins  |
          |   |          |           |  & 2   |  & 2   | 1 & 2 | 1 & 2 |
          |---+----------+-----------+--------+--------+-------+-------|
          |   |   COM1   |   COM4    | pins 1 | pins 2 | pins  | pins  |
          |   |          |           |  & 2   |  & 3   | 1 & 2 | 1 & 2 |
          |---+----------+-----------+--------+--------+-------+-------|
          |   |   COM3   |   COM2    | pins 1 | pins 1 | pins  | pins  |
          |   |          |           |  & 2   |  & 2   | 2 & 3 | 1 & 2 |
          |---+----------+-----------+--------+--------+-------+-------|
          |   |   COM3   |   COM4    | pins 1 | pins 2 | pins  | pins  |
          |   |          |           |  & 2   |  & 3   | 2 & 3 | 1 & 2 |
          |---+----------+-----------+--------+--------+-------+-------|
          |   |   COM1   | Disabled  | pins 2 | pins 1 | pins  | pins  |
          |   |          |           |  & 3   |  & 2   | 1 & 2 | 1 & 2 |
          |---+----------+-----------+--------+--------+-------+-------|
          |   |   COM3   | Disabled  | pins 2 | pins 2 | pins  | pins  |
          |   |          |           |  & 3   |  & 3   | 2 & 3 | 1 & 2 |
          |---+----------+-----------+--------+--------+-------+-------|
          |   | Disabled |   COM2    | pins 1 | pins 1 | pins  | pins  |
          |   |          |           |  & 2   |  & 2   | 1 & 2 | 2 & 3 |
          |---+----------+-----------+--------+--------+-------+-------|
          |   | Disabled |   COM4    | pins 1 | pins 2 | pins  | pins  |
          |   |          |           |  & 2   |  & 3   | 1 & 2 | 2 & 3 |
          |---+----------+-----------+--------+--------+-------+-------|
          |   | Disabled | Disabled  | pins 2 | pins 1 | pins  | pins  |
          |   |          |           |  & 3   |  & 2   | 2 & 3 | 2 & 3 |
          |------------------------------------------------------------|
          | Note: Pins designated should be in the closed position.    |
          +------------------------------------------------------------+