URI: 
  TEXT View Source
       
       # WESTERN DIGITAL CORPORATION
       
          WD1003V-SR1/SR2, WD1006V-SR1/SR2
       
          Replaces WD1003-RAH/RA2 & WD1006-RAH/RA2 respectively
       
          Data bus:           16-bit, ISA                                
          Size:               Full-length, full-height card              
          Hard drive          Two RLL ST506/412 drives                   
          supported:          
          Floppy drives       Two 360KB, 720KB, 1.2MB, or 1.44MB drives  
          supported:          
          Maximum heads/cyl.: 16 heads 2048 cylinders                    
          Options             Feature F301R has an optional ROM BIOS     
                              with shadow Ram which enables controller   
                              to interface with all types of ESDI drives 
                              bypassing the systems ROM BIOS drive type  
                              tables. Feature F300R does not include ROM 
                              BIOS option and system ROM BIOS must       
                              contain appropriate drive parameters.      
       
   IMG IMG 1
          
       
          +------------------------------------------------------------+
          |                        CONNECTIONS                         |
          |------------------------------------------------------------|
          |                 Function                  |    Location    |
          |-------------------------------------------+----------------|
          | 34-pin data cable connector-floppy drive  |      CN1       |
          |-------------------------------------------+----------------|
          | 20-pin data cable connector-drive 1       |      CN3       |
          |-------------------------------------------+----------------|
          | 20-pin data cable connector-drive 0       |      CN4       |
          |-------------------------------------------+----------------|
          | 34-pin control cable connector-hard drive |      CN5       |
          |-------------------------------------------+----------------|
          | 4-pin connector-drive active LED          |      CN6       |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                 USER CONFIGURABLE SETTINGS                 |
          |------------------------------------------------------------|
          |             Function              |   Location   | Setting |
          |-----------------------------------+--------------+---------|
          | » | Hard drives in latched mode   | JP1/jumper 1 |  open   |
          |---+-------------------------------+--------------+---------|
          |   | Hard drives in non-latched    | JP1/jumper 1 | closed  |
          |   | mode                          |              |         |
          |---+-------------------------------+--------------+---------|
          | » | 4 byte ECC                    | JP1/jumper 2 |  open   |
          |---+-------------------------------+--------------+---------|
          |   | 7 byte ECC                    | JP1/jumper 2 | closed  |
          |---+-------------------------------+--------------+---------|
          | » | Caching enabled               | JP1/jumper 3 |  open   |
          |---+-------------------------------+--------------+---------|
          |   | Caching disabled              | JP1/jumper 3 | closed  |
          |---+-------------------------------+--------------+---------|
          | » | BIOS enabled                  |     JP2      |  open   |
          |---+-------------------------------+--------------+---------|
          |   | BIOS disabled                 |     JP2      | closed  |
          |---+-------------------------------+--------------+---------|
          | » | Hard drive port address is    |     JP3      |  open   |
          |   | 1F0-1F7h                      |              |         |
          |---+-------------------------------+--------------+---------|
          |   | Hard drive port address is    |     JP3      | closed  |
          |   | 170-177h                      |              |         |
          |---+-------------------------------+--------------+---------|
          | » | Floppy drive port address is  |     JP4      |  open   |
          |   | 3F0-3F7h                      |              |         |
          |---+-------------------------------+--------------+---------|
          |   | Floppy drive port address is  |     JP4      | closed  |
          |   | 370-377h                      |              |         |
          |---+-------------------------------+--------------+---------|
          | » | Single speed floppy drives    |     JP5      |  open   |
          |   | supported                     |              |         |
          |---+-------------------------------+--------------+---------|
          |   | Dual speed floppy drives      |     JP5      | closed  |
          |   | supported                     |              |         |
          |---+-------------------------------+--------------+---------|
          | » | Bracket ground option         |     JP6      |  open   |
          |   | disabled                      |              |         |
          |---+-------------------------------+--------------+---------|
          |   | Bracket to board ground       |     JP6      | closed  |
          |   | connected                     |              |         |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |               MISCELLANEOUS TECHNICAL NOTES                |
          |------------------------------------------------------------|
          | Not all jumpers are installed. You must solder those that  |
          |   are not present. Do not combine single- and dual-speed   |
          | floppy drives on the same controller card. This controller |
          |   has a built-in low-level format program. To enter the    |
          | progam run the DEBUG utility supplied with DOS and at the  |
          |                  prompt enter: G=CC00:5.                   |
          +------------------------------------------------------------+