TEXT View Source
# UNIDENTIFIED
GW-106V/GW-106V1
+------------------------------------------------------------+
|------------------------------------------------------------|
| Data bus: | 16-bit ISA |
|-------------------+----------------------------------------|
| Size: | Three-quarter length, full-height card |
|-------------------+----------------------------------------|
| Hard drive | Two ST506/412 drives |
| supported: | |
|-------------------+----------------------------------------|
| Floppy drives | 360KB, 720KB, 1.2MB, 1.44MB |
| supported: | |
+------------------------------------------------------------+
IMG IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location |
|-----------------------------------------------+------------|
| 34-pin control cable connector - floppy drive | J1 |
|-----------------------------------------------+------------|
| 20-pin data cable connector - drive 1 | J3 |
|-----------------------------------------------+------------|
| 20-pin data cable connector - drive 0 | J4 |
|-----------------------------------------------+------------|
| 34-pin control cable connector - hard drive | J5 |
|-----------------------------------------------+------------|
| 4-pin connector - drive active LED | JP1 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Location | Setting |
|---------------------------------------+----------+---------|
| » | Latched hard drive mode enabled | JP2/A | open |
|---+-----------------------------------+----------+---------|
| | Non-latched hard rive mode | JP2/A | closed |
| | enabled | | |
|---+-----------------------------------+----------+---------|
| » | Four byte ECC enabled | JP2/B | open |
|---+-----------------------------------+----------+---------|
| | Reserved | JP2/B | closed |
|---+-----------------------------------+----------+---------|
| » | Caching enabled | JP2/C | open |
|---+-----------------------------------+----------+---------|
| | Caching disabled | JP2/C | closed |
|---+-----------------------------------+----------+---------|
| » | Factory configured - do not alter | JP2/D | N/A |
|---+-----------------------------------+----------+---------|
| » | Floppy drive interface primary | JP3 | open |
| | address select | | |
|---+-----------------------------------+----------+---------|
| | Floppy drive interface alternate | JP3 | closed |
| | address select | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS(CONTINUED) |
|------------------------------------------------------------|
| Function | Location | Setting |
|-------------------------------------+-----------+----------|
| » | Hard drive interface primary | JP4 | open |
| | address select | | |
|---+---------------------------------+-----------+----------|
| | Hard drive interface alternate | JP4 | closed |
| | address select | | |
|---+---------------------------------+-----------+----------|
| » | Bracket ground disabled | JP5 | open |
|---+---------------------------------+-----------+----------|
| | Bracket ground enabled | JP5 | closed |
|---+---------------------------------+-----------+----------|
| » | Floppy drive interface single | JP6 | open |
| | speed enabled | | |
|---+---------------------------------+-----------+----------|
| | Floppy drive interface dual | JP6 | closed |
| | speed enabled | | |
|------------------------------------------------------------|
| Note: The location of jumper JP5 is unspecified in |
| manufacturer documentation. |
+------------------------------------------------------------+