TEXT View Source
# UNITED MICROELECTRONICS CORPORATION
FSIO-UC3 (V1.2)
Data Bus 16-bit ISA
Card Size Half-length, half-height card
Hard Drives Two IDE (AT) drives
supported
Floppy drives Two 360KB, 720KB, 1.2MB, or 1.44MB drives
supported
IMG IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location | Function | Location |
|-------------------+----------+------------------+----------|
| 40-pin IDE(AT) | CN1 | 10-pin serial | CN5 |
| connector | | port 2 - | |
| | | internal | |
|-------------------+----------+------------------+----------|
| 34-pin cable | CN2 | 25-pin parallel | CN6 |
| connector - | | port - external | |
| floppy drive | | | |
|-------------------+----------+------------------+----------|
| 16-pin game port | CN3 | 4-pin connector | J2 |
| | | - drive active | |
| | | LED | |
|-------------------+----------+------------------+----------|
| 10-pin serial | CN4 | | |
| port 1 - internal | | | |
|------------------------------------------------------------|
| Note: The location of JP2 is unidentified. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Label | Position |
|--------------------------------+-------+-------------------|
| » | IOCHRDY signal enabled | J1 | Open |
|---+----------------------------+-------+-------------------|
| | IOCHRDY signal disabled | J1 | Closed |
|---+----------------------------+-------+-------------------|
| | Parallel port IRQ5 select | J3 | Pins 1 & 2 closed |
|---+----------------------------+-------+-------------------|
| | Parallel port IRQ7 select | J3 | Pins 2 & 3 closed |
|---+----------------------------+-------+-------------------|
| | Serial port 1 IRQ11 select | J4 | Pins 1 & 2 closed |
|---+----------------------------+-------+-------------------|
| | Serial port 1 IRQ4 select | J4 | Pins 2 & 3 closed |
|---+----------------------------+-------+-------------------|
| | Serial port 2 IRQ10 select | J5 | Pins 1 & 2 closed |
|---+----------------------------+-------+-------------------|
| | Serial port 2 IRQ3 select | J5 | Pins 2 & 3 closed |
|---+----------------------------+-------+-------------------|
| » | Serial port 2 enabled | JP2 | Pins 1 & 2 closed |
|---+----------------------------+-------+-------------------|
| | Serial port 2 disabled | JP2 | Pins 2 & 3 closed |
|---+----------------------------+-------+-------------------|
| » | Game port enabled | JP3 | Pins 1 & 2 closed |
|---+----------------------------+-------+-------------------|
| | Game port disabled | JP3 | Pins 2 & 3 closed |
|---+----------------------------+-------+-------------------|
| » | Serial port 1 COM1 select | JP4 | Pins 1 & 2 closed |
|---+----------------------------+-------+-------------------|
| | Serial port 1 COM3 select | JP4 | Pins 2 & 3 closed |
|---+----------------------------+-------+-------------------|
| » | Parallel port LPT2 select | JP5 | Pins 1 & 2 closed |
|---+----------------------------+-------+-------------------|
| | Parallel port LPT3 select | JP5 | Pins 2 & 3 closed |
|---+----------------------------+-------+-------------------|
| » | Serial port 1 enabled | JP6 | Pins 1 & 2 closed |
|---+----------------------------+-------+-------------------|
| | Serial port 1 disabled | JP6 | Pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS (CONTINUED) |
|------------------------------------------------------------|
| Function | Label | Position |
|-------------------------------------+-------+--------------|
| » | Floppy drive interface enabled | JP7 | Pins 1 & 2 |
| | | | closed |
|---+---------------------------------+-------+--------------|
| | Floppy drive interface disabled | JP7 | Pins 2 & 3 |
| | | | closed |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | JP8 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | IDE(AT) interface enabled | JP9 | Pins 1 & 2 |
| | | | closed |
|---+---------------------------------+-------+--------------|
| | IDE(AT) interface disabled | JP9 | Pins 2 & 3 |
| | | | closed |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | JP10 | Unidentified |
| | alter | | |
|------------------------------------------------------------|
| Note: The jumper used to set COM PORTS for the Secondary |
| Serial Port is unidentified. |
+------------------------------------------------------------+