URI: 
  TEXT View Source
       
       # ULTRASTOR CORPORATION
       
          12F/12
       
          Data Bus             16-bit ISA                                
          Card Size            Three-quarter length, half-height card    
          Hard Drives          Two ESDI drives                           
          supported            
          Floppy drives        Two 360KB, 720KB, 1.2MB, or 1.44MB drives 
          supported            
       
   IMG IMG 1
          
       
          +------------------------------------------------------------+
          |                        CONNECTIONS                         |
          |------------------------------------------------------------|
          |     Function      | Location |     Function     | Location |
          |-------------------+----------+------------------+----------|
          | 34-pin cable      |    J1    | 20-pin cable     |    J4    |
          | connector -       |          | connector -      |          |
          | floppy drive      |          | drive 0          |          |
          |-------------------+----------+------------------+----------|
          | 4-pin connector - |    J2    | 34-pin control   |    J5    |
          | drive active LED  |          | cable connector  |          |
          |                   |          | - hard drive     |          |
          |-------------------+----------+------------------+----------|
          | 20-pin cable      |    J3    |                  |          |
          | connector - drive |          |                  |          |
          | 1                 |          |                  |          |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                USER CONFIGURABLE SETTINGS                  |
          |------------------------------------------------------------|
          |              Function              | Label  |   Position   |
          |------------------------------------+--------+--------------|
          | » | Factory configured - do not    |  JP1   | Unidentified |
          |   | alter                          |        |              |
          |---+--------------------------------+--------+--------------|
          | » | Factory configured - do not    |  JP3   |    Closed    |
          |   | alter                          |        |              |
          |---+--------------------------------+--------+--------------|
          | » | On-board cache enabled         |  JP4   |     Open     |
          |---+--------------------------------+--------+--------------|
          |   | On-board cache disabled        |  JP4   |  Pins 3 & 4  |
          |   |                                |        |    closed    |
          |---+--------------------------------+--------+--------------|
          | » | Factory configured - do not    |  JP9   |     Open     |
          |   | alter                          |        |              |
          |---+--------------------------------+--------+--------------|
          | » | Third floppy drive with        | JP11/1 |     Open     |
          |   | twisted cable - jumper drive   |        |              |
          |   | as DS2                         |        |              |
          |---+--------------------------------+--------+--------------|
          |   | Third floppy drive with        | JP11/1 |    Closed    |
          |   | straight cable - jumper drive  |        |              |
          |   | as DS4                         |        |              |
          |---+--------------------------------+--------+--------------|
          | » | Drive 1 AT configured          | JP11/2 |     Open     |
          |---+--------------------------------+--------+--------------|
          |   | Drive 1 3.5 inch PS/2          | JP11/2 |    Closed    |
          |   | configured (different pin 2    |        |              |
          |   | polarity)                      |        |              |
          |---+--------------------------------+--------+--------------|
          | » | Drive 0 AT configured          | JP11/3 |     Open     |
          |---+--------------------------------+--------+--------------|
          |   | Drive 0 3.5 inch PS/2          | JP11/3 |    Closed    |
          |   | configured (different pin 2    |        |              |
          |   | polarity)                      |        |              |
          |---+--------------------------------+--------+--------------|
          | » | Floppy drive primary address   | JP11/4 |     Open     |
          |   | is 3F0h                        |        |              |
          |---+--------------------------------+--------+--------------|
          |   | Floppy drive secondary address | JP11/4 |    Closed    |
          |   | is 370h                        |        |              |
          |---+--------------------------------+--------+--------------|
          | » | Single speed floppy drive      | JP11/5 |     Open     |
          |   | enabled                        |        |              |
          |---+--------------------------------+--------+--------------|
          |   | Dual speed floppy drive        | JP11/5 |    Closed    |
          |   | enabled                        |        |              |
          |---+--------------------------------+--------+--------------|
          | » | Precomp varies according to    | JP11/6 |     Open     |
          |   | floppy data rate               |        |              |
          |---+--------------------------------+--------+--------------|
          |   | Precomp is 125 ns              | JP11/6 |    Closed    |
          |---+--------------------------------+--------+--------------|
          | » | Hard drive primary address     |  JP12  |     Open     |
          |   | select (1F0-1F7h)              |        |              |
          |---+--------------------------------+--------+--------------|
          |   | Hard drive secondary address   |  JP12  |    Closed    |
          |   | select (170-177h)              |        |              |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |          USER CONFIGURABLE SETTINGS (CONTINUED)            |
          |------------------------------------------------------------|
          |                Function                | Label | Position  |
          |----------------------------------------+-------+-----------|
          | » | Chassis ground not connected to    | JP16  |   Open    |
          |   | logic ground                       |       |           |
          |---+------------------------------------+-------+-----------|
          |   | Chassis ground connected to logic  | JP16  |  Closed   |
          |   | ground                             |       |           |
          |---+------------------------------------+-------+-----------|
          |   | Floppy interface disabled          | JP17  |   Open    |
          |---+------------------------------------+-------+-----------|
          |   | Floppy interface enabled           | JP17  |  Closed   |
          |---+------------------------------------+-------+-----------|
          | » | IRQ 14 select                      | JP20  | Pins 2 &  |
          |   |                                    |       | 3 closed  |
          |---+------------------------------------+-------+-----------|
          |   | IRQ 15 select                      | JP20  | Pins 1 &  |
          |   |                                    |       | 2 closed  |
          |------------------------------------------------------------|
          | Note: Jumpers JP1 and JP9 are removed on revision B00.     |
          | Location of jumper JP16 is unidentified.                   |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                    CACHE CONFIGURATION                     |
          |------------------------------------------------------------|
          |   Data buffer    |        JP5         |        JP6         |
          |------------------+--------------------+--------------------|
          | »   |    8KB     | Pins 2 & 3 closed  | Pins 1 & 2 closed  |
          |-----+------------+--------------------+--------------------|
          |     |    32KB    | Pins 1 & 2 closed  | Pins 1 & 2 closed  |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                  BIOS ADDRESS SELECTION                    |
          |------------------------------------------------------------|
          |   Address    | JP10/pins 1 & 2 | JP10/pins 3 | JP10/pins 5 |
          |              |                 |     & 4     |     & 6     |
          |--------------+-----------------+-------------+-------------|
          | » |  C8000h  |      Open       |    Open     |   Closed    |
          |---+----------+-----------------+-------------+-------------|
          |   |  CC000h  |      Open       |   Closed    |    Open     |
          |---+----------+-----------------+-------------+-------------|
          |   |  D0000h  |      Open       |   Closed    |   Closed    |
          |---+----------+-----------------+-------------+-------------|
          |   |  D4000h  |     Closed      |    Open     |    Open     |
          |---+----------+-----------------+-------------+-------------|
          |   |  D8000h  |     Closed      |    Open     |   Closed    |
          |---+----------+-----------------+-------------+-------------|
          |   |  DC000h  |     Closed      |   Closed    |    Open     |
          |---+----------+-----------------+-------------+-------------|
          |   | Disabled |      Open       |    Open     |    Open     |
          +------------------------------------------------------------+