TEXT View Source
# DIALOGIC CORPORATION
D/41EPCI
Card Type Voice processor card
Chip Set Motorola
Maximum Onboard Unidentified
Memory
I/O Options RJ-11 jacks (4), CTbus interface, 52-pin
connector,
20-pin connectors (2)
Data Bus 32-bit PCI
Card Size Full-length, full-height
IMG IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|---------------------+-------+----------------------+-------|
| CTbus interface | CN1 | Channel 4 via RJ-11 | J4 |
|---------------------+-------+----------------------+-------|
| Channel 1 via RJ-11 | J1 | 52-pin fax daughter | J5 |
| | | card connector | |
|---------------------+-------+----------------------+-------|
| Channel 2 via RJ-11 | J2 | 20-pin fax daughter | J6 |
| | | card connector | |
|---------------------+-------+----------------------+-------|
| Channel 3 via RJ-11 | J3 | 20-pin fax daughter | J7 |
| | | card connector | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Label | Position |
|-----------------------------------------+-------+----------|
| Board ID selection | SW1 | See note |
|-----------------------------------------+-------+----------|
| » Hook switch set for on hook operation | SW2/1 | Off |
|-----------------------------------------+-------+----------|
| Hook switch set to off hook operation | SW2/1 | On |
|-----------------------------------------+-------+----------|
| » Board ID range set to 0 - 15 | SW2/2 | Off |
|-----------------------------------------+-------+----------|
| Board ID range set to 16 - 31 | SW2/2 | On |
|------------------------------------------------------------|
| Note: SW1 is a rotary switch used to determine the Board |
| ID settings. The default Board ID setting is 0. |
| |
| SW1 is used in concurrence with SW2/2. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BOARD TERMINATION SETTINGS |
|------------------------------------------------------------|
| Setting | JP2 | JP3 | JP4 | JP5 |
|------------------------+--------+--------+--------+--------|
| » Termination disabled | Open | Open | Open | Open |
|------------------------+--------+--------+--------+--------|
| Termination enabled | Closed | Closed | Closed | Closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CTBUS CLOCK SIGNAL SETTINGS |
|------------------------------------------------------------|
| Setting | JP6 | JP7 |
|------------------+---------------------+-------------------|
| SCbus | Pins 1 & 2 closed | Pins 1 & 2 closed |
|------------------+---------------------+-------------------|
| MVIP | Pins 2 & 3 closed | Pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAGNOSTIC LED |
|------------------------------------------------------------|
| LED | Color | Status | Condition |
|-----+--------------+--------+------------------------------|
| CR5 | Unidentified | On | The card is receiving power |
|-----+--------------+--------+------------------------------|
| CR5 | Unidentified | Off | The card is not receiving |
| | | | power |
+------------------------------------------------------------+