TEXT View Source
# PATHLIGHT TECHNOLOGY
HIGH SPEED SSA DATA PUMP
Card Type Data Pump
Chip Set Intel
Maximum Onboard 512KB EPROM, 256KB SRAM
Memory
I/O Options SSA interface via 9 pin serial ports (2
RS-232), Host-Side PCI bus, Top edge test card
connector
Data Bus 32-bit PCI
Card Size Half-length
IMG IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|----------------------+-------+---------------------+-------|
| Host-side PCI bus | CN3 | 9-pin serial port 1 | J1 |
|----------------------+-------+---------------------+-------|
| Top edge test card | CN4 | 9-pin serial port 2 | J3 |
| connector | | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Label | Position |
|-----------------------+---------+--------------------------|
| Port 1 external SSA | J2 | Pins 3 & 4, 5 & 6, 11 & |
| connector enabled | | 12, 13 & 14 closed |
|-----------------------+---------+--------------------------|
| Port 1 external SSA | J2 | Open |
| connector disabled | | |
|-----------------------+---------+--------------------------|
| Port 2 external SSA | J3 | Pins 3 & 4, 5 & 6, 11 & |
| connector enabled | | 12, 13 & 14 closed |
|-----------------------+---------+--------------------------|
| Port 2 external SSA | J3 | Open |
| connector disabled | | |
|------------------------------------------------------------|
| Note: If an SSA application does not require the use of |
| external serial ports, a custom cable may be used to |
| connect the odd number pins of J2 and/or J4 to an internal |
| device loop. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) |
|------------------------------------------------------------|
| LED | Color | Status | Condition |
|-------+-------+--------+-----------------------------------|
| LED 1 | Green | On | Firmware loaded and executed |
|-------+-------+--------+-----------------------------------|
| LED 1 | Green | Off | Firmware not loaded and executing |
| | | | or a serious error condition |
| | | | exists |
|-------+-------+--------+-----------------------------------|
| LED 2 | Red | On | One or more SSA ports are active |
|-------+-------+--------+-----------------------------------|
| LED 2 | Red | Off | No ports are active |
+------------------------------------------------------------+