URI: 
  TEXT View Source
       
       # PATTON ELECTRONICS COMPANY
       
          2042MT-MC
       
          Card Type         RS-530 to HSSI Interface Converter           
          Chip Set          Unidentified                                 
          I/O Options       RS-530 DCE/DTE port, HSSI DCE/DTE port,      
                            power                                        
          Maximum Data Rate 10Mbps                                       
          Data Bus          External                                     
       
   IMG IMG 1
          
       
          +------------------------------------------------------------+
          |                        CONNECTIONS                         |
          |------------------------------------------------------------|
          |       Function       | Label |      Function       | Label |
          |----------------------+-------+---------------------+-------|
          | RS-530 DCE/DTE port  |  CN1  | HSSI DCE/DTE port   |  CN2  |
          | (25-pin connector)   |       | (50-pin connector)  |       |
          |----------------------+-------+---------------------+-------|
          | Power                |  CN3  |                     |       |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                        GAPPED CLOCK                        |
          |------------------------------------------------------------|
          |                  Setting                   | SW1/1 | SW1/2 |
          |--------------------------------------------+-------+-------|
          | » |       HSSI gapped clock disabled       |  On   |  Off  |
          |---+----------------------------------------+-------+-------|
          |   |  HSSI gapped clock enabled. Data flow  |  Off  |  On   |
          |   | is interrupted by an idle clock signal |       |       |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                   SYNCHRONIZATION METHOD                   |
          |------------------------------------------------------------|
          |                 Setting                 |  SW3   |   SW4   |
          |-----------------------------------------+--------+---------|
          | » |         Data skips circuit          |  Off   |   On    |
          |---+-------------------------------------+--------+---------|
          |   |     Data passes through circuit     |   On   |   Off   |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                     DIAGNOSTIC LED(S)                      |
          |------------------------------------------------------------|
          | LED | Color | Status |              Condition              |
          |-----+-------+--------+-------------------------------------|
          | STS | Green |   On   | Both DTR and DSR signals are active |
          |-----+-------+--------+-------------------------------------|
          | STS | Green |  Off   | DTR and/or DSR signals are inactive |
          |-----+-------+--------+-------------------------------------|
          | TST |  Red  |   On   |   Device is conducting a loopback   |
          |     |       |        |                test                 |
          |-----+-------+--------+-------------------------------------|
          | TST |  Red  |  Off   | Device is not conducting a loopback |
          |     |       |        |                test                 |
          +------------------------------------------------------------+