TEXT View Source
# ACCTON TECHNOLOGY CORPORATION
ETHERCOMBO-16 (EN1640)
NIC Type Ethernet
Transfer Rate 10Mbps
Data Bus 16-bit ISA
Topology Star
Linear Bus
Wiring Type Unshielded twisted pair
RG58A/U 50ohm coaxial
AUI transceiver via DB-15 port
Boot ROM Available
IMG IMG 1
+------------------------------------------------------------+
| INITIAL STATE CONFIGURATION | |
|-----------------------------------------------------| |
| Mode | JP1 | |
|-------------------------------------+---------------| |
| ยป | Initial state disabled 1 | Open | |
|---+---------------------------------+---------------| |
| | Initial state enabled 2 | Closed | |
|---+--------------------------------------------------------|
| | Note 1 Adapter uses default configuration settings, or |
| | user selected settings through software. |
| | 2 Adapter is forced into an INITIAL STATE, where |
| | adapter mode is NE1000, I/O address is 280h, IRQ is |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CABLE TYPE |
|------------------------------------------------------------|
| Type | JP2 |
|--------------------------------------+---------------------|
| RG-58A/U 50ohm coaxial | Pins 1 & 2 Closed |
|--------------------------------------+---------------------|
| AUI transceiver via DB-15 port | Pins 2 & 3 Closed |
|------------------------------------------------------------|
| Note:Twisted pair wire is selected through the |
| configuration software that comes with the card. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) |
|------------------------------------------------------------|
| LED | Color | Status | Condition |
|---------+----------+-----------+---------------------------|
| LED1 | Green | On | Twisted pair network |
| | | | connection is good |
|---------+----------+-----------+---------------------------|
| LED1 | Green | Off | Twisted pair network |
| | | | connection is broken |
|------------------------------------------------------------|
| Note:LED1 indications are only valid when the cable type |
| is twisted pair wire. |
+------------------------------------------------------------+