TEXT View Source
# ASANTE TECHNOLOGIES, INC.
10BASET MINI MAU
Card Type Ethernet Transceiver
Maximum Network Rate 10Mbps
Data Bus AUI
Topology Star
Wiring Type Unshielded twisted pair
IMG IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|------------------+-------+-------------------------+-------|
| AUI connector | CN1 | Unshielded twisted pair | CN2 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Setting | Label | Position |
|-----------------------------------------+-------+----------|
| » | Correct signal if polarity is | SW1/1 | On |
| | reversed | | |
|---+-------------------------------------+-------+----------|
| | Do not correct signal if polarity | SW1/1 | Off |
| | is reversed | | |
|---+-------------------------------------+-------+----------|
| » | Link integrity function enabled | SW1/2 | On |
|---+-------------------------------------+-------+----------|
| | Link integrity function disabled | SW1/2 | Off |
|---+-------------------------------------+-------+----------|
| » | Heartbeat function disabled | SW1/3 | On |
|---+-------------------------------------+-------+----------|
| | Heartbeat function enabled | SW1/3 | Off |
|------------------------------------------------------------|
| Note: The signal inversion correction should always |
| be enabled when an Asante hub is used. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) |
|------------------------------------------------------------|
| LED | Color | Status | Condition |
|------+--------+--------+-----------------------------------|
| LED1 | Green | On | Transceiver is receiving power |
|------+--------+--------+-----------------------------------|
| LED1 | Green | Off | Transceiver is not receiving |
| | | | power |
|------+--------+--------+-----------------------------------|
| LED2 | Green | On | Network connection is good |
|------+--------+--------+-----------------------------------|
| LED2 | Green | Off | Network connection is broken |
|------+--------+--------+-----------------------------------|
| LED3 | Green | On | Transceiver is receiving from |
| | | | network |
|------+--------+--------+-----------------------------------|
| LED3 | Green | Off | Transceiver is not receiving from |
| | | | network |
|------+--------+--------+-----------------------------------|
| LED4 | Green | On | Transceiver is transmitting to |
| | | | network |
|------+--------+--------+-----------------------------------|
| LED4 | Green | Off | Transceiver is not transmitting |
| | | | to network |
|------+--------+--------+-----------------------------------|
| LED5 | Yellow | On | 10Base-T polarity reversed |
|------+--------+--------+-----------------------------------|
| LED5 | Yellow | Off | 10Base-T polarity correct |
|------+--------+--------+-----------------------------------|
| LED6 | Yellow | On | Network collision detected |
|------+--------+--------+-----------------------------------|
| LED6 | Yellow | Off | Network collision not detected |
+------------------------------------------------------------+