URI: 
  TEXT View Source
       
       # DANPEX CORPORATION (ADI SYSTEMS, INC.)
       
          Aquila AQ-EISA
       
          NIC Type         Ethernet                                      
          Transfer Rate    10Mbps                                        
          Data Bus         32-bit EISA                                   
          Topology         Star                                          
                                                                         
                           Linear bus                                    
          Wiring Type      RG-58/U 50ohm coaxial                         
                                                                         
                           Unshielded twisted pair                       
                                                                         
                           AUI Transceiver via DB-15 port                
          Boot ROM         Not Available                                 
       
   IMG IMG 1
          
       
          +------------------------------------------------------------+
          |                         CABLE TYPE                         |
          |------------------------------------------------------------|
          |               Type               |    JP1     |   JP3-10   |
          |----------------------------------+------------+------------|
          | » |        RG-58A/U 50ohm        | Pins 1 & 2 | Pins 1 & 2 |
          |   |                              |   Closed   |   Closed   |
          |---+------------------------------+------------+------------|
          |   |  AUI transceiver via DB-15   | Pins 1 & 2 | Pins 2 & 3 |
          |   |             port             |   Closed   |   Closed   |
          |---+------------------------------+------------+------------|
          |   |   Unshielded twisted pair    | Pins 2 & 3 |    N/A     |
          |   |                              |   Closed   |            |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                    LINK INTEGRITY TEST                     |
          |------------------------------------------------------------|
          |           Setting           |             JP31             |
          |-----------------------------+------------------------------|
          | »        |     Enabled      |      Pins 1 & 2 Closed       |
          |----------+------------------+------------------------------|
          |          |     Disabled     |      Pins 2 & 3 Closed       |
          |------------------------------------------------------------|
          | Note:Link Integrity is only used with 10Base-T wiring.     |
          | When using an AUI transciever, the test should be          |
          | disabled.                                                  |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                     DIAGNOSTIC LED(S)                      |
          |------------------------------------------------------------|
          | LED  | Color |  Status  |            Condition             |
          |------+-------+----------+----------------------------------|
          | LED1 | Green |    On    |   Data is being transmitted or   |
          |      |       |          |             received             |
          |------+-------+----------+----------------------------------|
          | LED1 |  Red  | Blinking | Data is not being transmitted or |
          |      |       |          |             received             |
          |------+-------+----------+----------------------------------|
          | LED1 |  Red  |   Off    | Twisted pair network connection  |
          |      |       |          |             is good              |
          +------------------------------------------------------------+