TEXT View Source
# EAGLE TECHNOLOGY
SHIVA ETHERPORT IIT
NIC Type Ethernet
Transfer Rate 10Mbps
Data Bus NuBus
Topology Linear Bus
Wiring Type Unshielded twisted pair
Boot ROM Not Available
IMG IMG 1
+------------------------------------------------------------+
| CABLE TYPE |
|------------------------------------------------------------|
| Cable type is automatically determined by the card. If |
| both the RJ45 and AUI ports are used, the card will |
| default to RJ45. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| FACTORY CONFIGURED SETTINGS |
|------------------------------------------------------------|
| Jumper | Setting |
|-------------------------------+----------------------------|
| SW1/Switch 1 | Off |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SIGNAL QUALITY |
|------------------------------------------------------------|
| Setting | SW1/Switch 2 |
|-----------------------------------+------------------------|
| | Signal quality test enabled | Off |
|---+-------------------------------+------------------------|
| » | Signal quality test diabled | On |
+------------------------------------------------------------+
+------------------------------------------------------------+
| LINK INTEGRITY |
|------------------------------------------------------------|
| Function | SW1/Switch 3 |
|-----------------------------------------+------------------|
| » | Link intergity enabled | Off |
|-------+---------------------------------+------------------|
| | Link integrity disabled | On |
|------------------------------------------------------------|
| Note: If card is used in a pre-10BaseT cabling network, |
| disable the link integrity function. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| REVERSED POLARITY CORRECTION |
|------------------------------------------------------------|
| Setting | SW1/Switch 4 |
|------------------------------------------+-----------------|
| » | Reverse polarity correction enabled | Off |
|---+--------------------------------------+-----------------|
| | Reverse polarity correction disabled | On |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) |
|------------------------------------------------------------|
| L1 | Condition |
|-------------------+----------------------------------------|
| On | 10BaseT link integrity exists |
|-------------------+----------------------------------------|
| Off | 10BaseT link integrity broken |
+------------------------------------------------------------+