URI: 
  TEXT View Source
       
       # GARRETT COMMUNICATIONS
       
          MAGNUM CT1
       
          Card Type        Ethernet Transceiver                          
          NIC Type         Ethernet                                      
          Maximum Onboard  Unidentified                                  
          Memory           
          Boot ROM         Not available                                 
          Network Transfer 10Mbps                                        
          Rate             
          Topology         Linear Bus                                    
          Wiring Type      AUI transceiver via DB-15 port, RG-58A/U      
                           50ohm coaxial                                 
          Data Bus         External                                      
       
   IMG IMG 1
          
       
          +------------------------------------------------------------+
          |                        CONNECTIONS                         |
          |------------------------------------------------------------|
          |         Function          | Label |    Function    | Label |
          |---------------------------+-------+----------------+-------|
          | AUI transceiver via DB-15 |  CN1  | RG-58A/U 50ohm |  CN2  |
          |                           |       | coaxial        |       |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                 USER CONFIGURABLE SETTINGS                 |
          |------------------------------------------------------------|
          |                Function                | Label | Position  |
          |----------------------------------------+-------+-----------|
          | ยป | SQE enabled                        |  SW1  |    On     |
          |---+------------------------------------+-------+-----------|
          |   | SQE disabled                       |  SW1  |    Off    |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                     DIAGNOSTIC LED(S)                      |
          |------------------------------------------------------------|
          | LED  | Color  | Status |             Condition             |
          |------+--------+--------+-----------------------------------|
          | LED1 | Green  |   On   |            Power is on            |
          |------+--------+--------+-----------------------------------|
          | LED1 | Green  |  Off   |           Power is off            |
          |------+--------+--------+-----------------------------------|
          | LED2 | Yellow |   On   |          SQE is enabled           |
          |------+--------+--------+-----------------------------------|
          | LED2 | Yellow |  Off   |          SQE is disabled          |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |               MISCELLANEOUS TECHNICAL NOTES                |
          |------------------------------------------------------------|
          | The AUI port should be directly connected to the           |
          | workstation. If you cannot connect directly to the         |
          | workstation, an AUI drop cable (which cannot exceed 3 feet |
          | in length) may be used.                                    |
          +------------------------------------------------------------+