TEXT View Source
# KODIAK TECHNOLOGY, INC.
KODIAK~16 10BT
NIC Type Ethernet
Transfer Rate 10Mbps
Data Bus 16-bit ISA
Topology Linear bus
Wiring Type Unshielded twisted pair
Boot ROM Available
IMG IMG 1
+------------------------------------------------------------+
| COMPATIBILITY MODE |
|------------------------------------------------------------|
| Setting | JP1 |
|---------------------------------------+--------------------|
| » | Disabled | Open |
|---------------+-----------------------+--------------------|
| | Enabled | Closed |
|------------------------------------------------------------|
| Note:On some systems the data bus timing is not truly |
| IBM PC/AT compatible. If the card does not initialize or |
| you receive an "Error Reading Address PROM" message, |
| compatibility mode should be enabled (JP1 closed). |
+------------------------------------------------------------+
+------------------------------------------------------------+
| INTERRUPT REQUEST |
|------------------------------------------------------------|
| IRQ | JP2A | JP2B | JP2C | JP2D | JP2E | JP2F | JP2G |
|-----------+------+------+------+------+------+------+------|
| | 2/9 | Open | Open | Open | Open | Open |Closed| Open |
|-+---------+------+------+------+------+------+------+------|
|»| 3 | Open | Open | Open | Open |Closed| Open | Open |
|-+---------+------+------+------+------+------+------+------|
| | 5 | Open | Open | Open |Closed| Open | Open | Open |
|-+---------+------+------+------+------+------+------+------|
| | 10 | Open | Open | Open | Open | Open | Open |Closed|
|-+---------+------+------+------+------+------+------+------|
| | 11 |Closed| Open | Open | Open | Open | Open | Open |
|-+---------+------+------+------+------+------+------+------|
| | 12 | Open |Closed| Open | Open | Open | Open | Open |
|-+---------+------+------+------+------+------+------+------|
| | 15 | Open | Open |Closed| Open | Open | Open | Open |
|-+---------+------+------+------+------+------+------+------|
| | Polled | Open | Open | Open | Open | Open | Open | Open |
| | I/O | | | | | | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| I/O BASE ADDRESS |
|------------------------------------------------------------|
| Address | JP2H | JP2I | JP2J |
|-----------------+------------+--------------+--------------|
| | 200h | Open | Closed | Closed |
|---+-------------+------------+--------------+--------------|
| | 210h | Open | Closed | Open |
|---+-------------+------------+--------------+--------------|
| » | 300h | Open | Open | Closed |
|---+-------------+------------+--------------+--------------|
| | 310h | Open | Open | Open |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BOOT ROM ADDRESS |
|------------------------------------------------------------|
| Address | JP3A | JP3B |
|--------------------+-------------------+-------------------|
| C8000h | Closed | Closed |
|--------------------+-------------------+-------------------|
| CC000h | Closed | Open |
|--------------------+-------------------+-------------------|
| D8000h | Open | Closed |
|--------------------+-------------------+-------------------|
| DC000h | Open | Open |
|------------------------------------------------------------|
| Note:In earlier versions of this card there is no socket |
| for a boot ROM. If you have one of these earlier |
| socketless versions and you purchased it less than five |
| years ago, you may return it to the manufacturer for an |
| updated version. You can also solder in a socket for a |
| boot ROM but you will void the warranty. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BOOT ROM |
|------------------------------------------------------------|
| Setting | JP3C |
|---------------------------------+--------------------------|
| » | Disabled | Open |
|---+-----------------------------+--------------------------|
| | Enabled | Closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CABLE LENGTH |
|------------------------------------------------------------|
| Length | JP5 |
|-----------------------------------------+------------------|
| » | < 100 Meters | Open |
|-------------+---------------------------+------------------|
| | > 100 Meters | Closed |
|------------------------------------------------------------|
| Note:The hub must support cable lengths of greater than |
| 100 meters if this option is used. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| TRANSMIT/RECEIVE WIRE POLARITY |
|------------------------------------------------------------|
| Setting | SW1 (SW1/1 & SW1/2) |
|------------------------------+-----------------------------|
| » | Normal | On |
|-----------+------------------+-----------------------------|
| | Reversed | Off |
|------------------------------------------------------------|
| Note:If the transmit/receive wires are reversed, they |
| can be corrected for by setting this option to reversed. |
| On some earlier versions of this card there are two |
| switches. On these older cards each switch should be set |
| the same. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) |
|------------------------------------------------------------|
| LED1 | Hub LED | Condition |
|-------------+----------------+-----------------------------|
| On | On | Network connection is good |
|-------------+----------------+-----------------------------|
| Off | Off | Tx/Rx polarity crossover at |
| | | adapter |
|------------------------------------------------------------|
| Note:The Hub LED is located on the Hub not the NIC. |
| |
| If a crossover condition exists, this can be corrected for |
| by using switch SW1. |
+------------------------------------------------------------+