URI: 
  TEXT View Source
       
       # KATRON TECHNOLOGIES, INC.
       
          KF-221TX, KF-221TX/2
       
          Card Type              Network Interface Card                  
          NIC Type               Ethernet                                
          Maximum Onboard Memory Unidentified                            
          Boot ROM               Unidentified                            
          Network Transfer Rate  10Mbps, 100Mbps                         
          Topology               Star bus                                
          Wiring Type            Unshielded twisted pair                 
          Data Bus               32-bit PCI                              
       
   IMG IMG 1
          
       
          +------------------------------------------------------------+
          |                        CONNECTIONS                         |
          |------------------------------------------------------------|
          |                     Function                     |  Label  |
          |--------------------------------------------------+---------|
          | UTP connector                                    |   CN1   |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                  NETWORK SPEED SELECTION                   |
          |------------------------------------------------------------|
          | For 10BASE-T Ethernet networks, the Fast Ethernet adapter  |
          | uses Category 3, 4, or 5 UTP cable. To establish a valid   |
          | 10 Mbps connection, the cable must be connected to a       |
          | 10BASE-T hub.                                              |
          |                                                            |
          | For 100BASE-TX Ethernet networks, the Fast Ethernet        |
          | adapter uses Category 5 UTP cable. To establish a valid    |
          | 100 Mbps connection, the cable must be connected to a      |
          | 100BASE-TX hub.                                            |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                     DIAGNOSTIC LED(S)                      |
          |------------------------------------------------------------|
          | LED  |  Status  |                Condition                 |
          |------+----------+------------------------------------------|
          | LED1 |    On    |  100BASE-TX connection is selected and   |
          |      |          |                  active                  |
          |------+----------+------------------------------------------|
          | LED1 |   Off    |  100BASE-TX connection is not selected   |
          |      |          |                and active                |
          |------+----------+------------------------------------------|
          | LED2 |    On    |   10BASE-TX connection is selected and   |
          |      |          |                  active                  |
          |------+----------+------------------------------------------|
          | LED2 |   Off    | 10BASE-TX connection is not selected and |
          |      |          |                  active                  |
          |------+----------+------------------------------------------|
          | LED3 | Blinking |    Network traffic is present and is     |
          |      |          |          transmitting/receiving          |
          |------+----------+------------------------------------------|
          | LED3 |   Off    |  Network traffic is not present and is   |
          |      |          |  not transmitting/receiving for either   |
          |      |          |                  speed                   |
          +------------------------------------------------------------+