TEXT View Source
# INTERPHASE CORPORATION
5511 PCI FDDI ADAPTER (DAS SC DUPLEX PB05511-002)
Card Type Network Interface Card
NIC Type FDDI
Maximum Onboard Memory Unidentified
Boot ROM Unidentified
Network Transfer Rate 100Mbps
Topology Ring, Peer-Peer
Wiring Type Fiber optic cable
Data Bus 32-bit PCI
IMG IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|---------------------------+-------+----------------+-------|
| Fiber optic connector - | CN1 | Fiber optic | CN3 |
| SC (Port A) | | connector - SC | |
| | | (Port B) | |
|---------------------------+-------+----------------+-------|
| 6-pin DIN (Optical Bypass | CN2 | | |
| Switch) | | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) |
|------------------------------------------------------------|
| LED1 | Condition |
|-------------------+----------------------------------------|
| On | Network connection good |
|-------------------+----------------------------------------|
| Off | Network connection broken |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) CONTINUED |
|------------------------------------------------------------|
| LED2 | LED3 | LED4 | Condition |
|-----------+-----------+-------+----------------------------|
| Off | Off | On | Onboard SMT processor |
| | | | diagnostics in progress or |
| | | | failure (adapter not |
| | | | operational). |
|-----------+-----------+-------+----------------------------|
| On | Blinking | Off | Onboard SMT processor |
| | | | providing Common Boot |
| | | | interface to host system. |
|-----------+-----------+-------+----------------------------|
| Blinking | Off | Off | Onboard SMT processor |
| | | | providing Report Command |
| | | | interface to host system. |
|-----------+-----------+-------+----------------------------|
| Blinking | On | Off | Network connection enabled |
| | | | and Report Command |
| | | | interface continuing. |
|------------------------------------------------------------|
| Note: When the 5511 is either powered up or reset, the SMT |
| processor automatically performs a series of onboard |
| diagnostics. If the diagnostics complete successfully, |
| LED4 (Error LED) will go to Off. If the diagnostics |
| complete unsuccessfully, LED4 will remain on indicating |
| processor initialization failure, and the adapter will be |
| inoperational. |
+------------------------------------------------------------+