TEXT View Source
# IMC NETWORKS CORPORATION
FT-LANCVR/TP
Card Type Ethernet Transceiver
NIC Type Ethernet
Maximum Onboard Unidentified
Memory
Boot ROM Not available
Network Transfer 10Mbps
Rate
Topology Linear Bus, Star
Wiring Type RJ-45 Shielded twisted pair, RJ-45 Unshielded
twisted pair,
AUI transceiver via DB-15 port
Data Bus External
IMG IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|------------------------+--------+-----------------+--------|
| AUI connector | CN1 | RJ-45 crossover | CN4 |
| | | connector | |
|------------------------+--------+-----------------+--------|
| RJ-45 crossover | CN2 | RJ-45 | CN5 |
| connector | | pass-through | |
| | | connector | |
|------------------------+--------+-----------------+--------|
| RJ-45 pass-through | CN3 | | |
| connector | | | |
|------------------------------------------------------------|
| Note: Each port contains two RJ-45 connectors. Only one |
| may be used at a time. Either the crossover connector |
| which is for connecting to a network interface card, or |
| the pass-through connector which is for connecting to a |
| hub or repeater. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Label | Position |
|----------------------------------------+-------+-----------|
| » | SQE disabled | SW1 | Off |
|---+------------------------------------+-------+-----------|
| | SQE enabled | SW1 | On |
|---+------------------------------------+-------+-----------|
| » | Alarm enabled | SW2 | On |
|---+------------------------------------+-------+-----------|
| | Alarm disabled | SW2 | Off |
|---+------------------------------------+-------+-----------|
| » | Mode 1 enabled | SW3 | On |
|---+------------------------------------+-------+-----------|
| | Mode 2 enabled | SW3 | Off |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) |
|------------------------------------------------------------|
| LED | Color | Status | Condition |
|-------+-------+----------+---------------------------------|
| LED1 | Green | On | Valid data detected (CN2 or |
| | | | CN3) |
|-------+-------+----------+---------------------------------|
| LED1 | Green | Off | Valid data not detected (CN2 or |
| | | | CN3) |
|-------+-------+----------+---------------------------------|
| LED2 | Red | Blinking | Network connection is broken |
| | | | (CN2 or CN3) |
|-------+-------+----------+---------------------------------|
| LED2 | Red | Off | Network connection is good (CN2 |
| | | | or CN3) |
|-------+-------+----------+---------------------------------|
| LED3 | Green | On | Network connection is good (CN2 |
| | | | or CN3) |
|-------+-------+----------+---------------------------------|
| LED3 | Green | Off | Network connection is broken |
| | | | (CN2 or CN3) |
|-------+-------+----------+---------------------------------|
| LED4 | Green | On | Valid data detected (CN4 or |
| | | | CN5) |
|-------+-------+----------+---------------------------------|
| LED4 | Green | Off | Valid data not detected (CN4 or |
| | | | CN5) |
|-------+-------+----------+---------------------------------|
| LED5 | Red | Blinking | Network connection is broken |
| | | | (CN4 or CN5) |
|-------+-------+----------+---------------------------------|
| LED5 | Red | Off | Network connection is good (CN4 |
| | | | or CN5) |
|-------+-------+----------+---------------------------------|
| LED6 | Green | On | Network connection is good (CN4 |
| | | | or CN5) |
|-------+-------+----------+---------------------------------|
| LED6 | Green | Off | Network connection is broken |
| | | | (CN4 or CN5) |
|-------+-------+----------+---------------------------------|
| LED7 | Amber | On | SQE enabled |
|-------+-------+----------+---------------------------------|
| LED7 | Amber | Off | SQE disabled |
|-------+-------+----------+---------------------------------|
| LED8 | Amber | On | Hardware malfunction detected |
|-------+-------+----------+---------------------------------|
| LED8 | Amber | Off | Hardware functioning correctly |
|-------+-------+----------+---------------------------------|
| LED9 | Red | On | Collisions detected on network |
|-------+-------+----------+---------------------------------|
| LED9 | Red | Off | No collisions detected on |
| | | | network |
|-------+-------+----------+---------------------------------|
| LED10 | Amber | On | Data is being received |
|-------+-------+----------+---------------------------------|
| LED10 | Amber | Off | Data is not being received |
|-------+-------+----------+---------------------------------|
| LED11 | Green | On | Data is being transmitted |
|-------+-------+----------+---------------------------------|
| LED11 | Green | Off | Data is not being transmitted |
|-------+-------+----------+---------------------------------|
| LED12 | Green | On | Power is being supplied via the |
| | | | AUI connector |
|-------+-------+----------+---------------------------------|
| LED12 | Green | Off | Power is not being supplied via |
| | | | the AUI connector |
+------------------------------------------------------------+