TEXT View Source
# LANCAST
6111-02
Card Type Network Interface Card
NIC Type Ethernet
Maximum Onboard Memory 6KB
Boot ROM Not available
Network Transfer Rate 100Mbps (200Mbps full duplex)
Topology Star
Wiring Type Fiber optic cable
Data Bus 32-bit PCI
IMG IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|----------------------+-------+---------------------+-------|
| Fiber optic ST | CN1 | Fiber optic ST | CN2 |
| connector - transmit | | connector - receive | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) |
|------------------------------------------------------------|
| LED | Color | Status | Condition |
|-------+--------+----------+--------------------------------|
| LINK | Green | On | Network connection is good |
|-------+--------+----------+--------------------------------|
| LINK | Red | On | Network connection is broken |
|-------+--------+----------+--------------------------------|
| RX | Yellow | Blinking | Data is being received |
|-------+--------+----------+--------------------------------|
| RX | Yellow | Off | Data is not being received |
|-------+--------+----------+--------------------------------|
| TX | Green | Blinking | Data is being transmitted |
|-------+--------+----------+--------------------------------|
| TX | Green | Off | Data is not being transmitted |
|------------------------------------------------------------|
| Note:With both the TX & RX LED’s lit up, the card is |
| either using full-duplex mode or there is a data collision |
| present. |
+------------------------------------------------------------+