URI: 
  TEXT View Source
       
       # NATIONAL SEMICONDUCTOR CORPORATION
       
          ETHERNODE 16AT-T
       
          NIC Type         Ethernet                                      
          Transfer Rate    10Mbps                                        
          Data Bus         8/16-bit ISA                                  
          Topology         Linear Bus                                    
          Wiring Type      Unshielded twisted pair                       
                                                                         
                           AUI transceiver via DB-15 port                
          Boot ROM         Available                                     
       
   IMG IMG 1
          
       
          +------------------------------------------------------------+
          |                 CARD IDENTIFICATION NUMBER                 |
          |------------------------------------------------------------|
          |    Number    |   JP1A    |   JP1B    |   JP1C   |   JP1D   |
          |--------------+-----------+-----------+----------+----------|
          | »     |  1   |   Open    |   Open    |   Open   |  Closed  |
          |-------+------+-----------+-----------+----------+----------|
          |       |  2   |   Open    |   Open    |  Closed  |   Open   |
          |-------+------+-----------+-----------+----------+----------|
          |       |  3   |   Open    |  Closed   |   Open   |   Open   |
          |-------+------+-----------+-----------+----------+----------|
          |       |  4   |  Closed   |   Open    |   Open   |   Open   |
          |------------------------------------------------------------|
          | Note: Up to four NICs can be installed in a single system. |
          | If more than one card is installed, each card must have a  |
          | different Identification number.                           |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                    LINK INTEGRITY TEST                     |
          |------------------------------------------------------------|
          |            Setting             |            W3             |
          |--------------------------------+---------------------------|
          | »          |      Enabled      |     Pins 2 & 3 closed     |
          |------------+-------------------+---------------------------|
          |            |     Disabled      |     Pins 1 & 2 closed     |
          |------------------------------------------------------------|
          | Note: The link integrity test is only valid when the cable |
          | type is unshielded twisted pair.                           |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                NETWORK SEGMENT LENGTH NOTES                |
          |------------------------------------------------------------|
          | The segment length is automatically detected and           |
          | configured on this card, but may not be on other cards on  |
          | the network segment. All NICs on the network segment must  |
          | have this option set the same.                             |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                    DATA BUS SPEED NOTES                    |
          |------------------------------------------------------------|
          | On some systems the data bus timing is not truly IBM PC/AT |
          | compatible. If the card is not initializing, Changing the  |
          | data bus speed from 'Normal' to 'Fast' may allow the card  |
          | to operate properly. To change the data bus speed you must |
          | use the ICRCNFIG utility that comes with the card.         |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |          BOOT ROM/CHECKPOINT SECURITY CHIP NOTES           |
          |------------------------------------------------------------|
          | The boot ROM socket accepts an 8K boot ROM or a CheckPoint |
          | security chip. The CheckPoint security chip supplies virus |
          | protection, access control, and access logging functions.  |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                     DIAGNOSTIC LED(S)                      |
          |------------------------------------------------------------|
          | Color | Status |                 Condition                 |
          |-------+--------+-------------------------------------------|
          | Green |   On   |  Twisted pair network connection is good  |
          |-------+--------+-------------------------------------------|
          | Green |  Off   | Twisted pair network connection is broken |
          |-------+--------+-------------------------------------------|
          |  Red  |   On   |   Data is being transmitted or received   |
          |-------+--------+-------------------------------------------|
          |  Red  |  Off   | Data is not being transmitted or received |
          +------------------------------------------------------------+